论文信息 - Design and beam test of a high intensity continuous wave RFQ accelerator

Design and beam test of a high intensity continuous wave RFQ accelerator

A four-vane continuous wave (CW) RFQ has been designed for the injector II LINAC of China ADS project. To acquire the experience of a CW RFQ on design, tuning, conditioning, running, etc., a 1-m-long RFQ accelerator prototype has been built. Working at 162.5 MHz, the RFQ prototype accelerates protons of 10 mA from 20 keV to 560 keV in one meter length with a low inter-vane voltage of 65 kV and a safe Kilpatric factor of 1.3. Conditioning and beam test of the accelerator prototype have been completed, and it shows the transmission efficiency can reach 90% with a 10 mA CW proton beam. Design, fabrication and tests of the RFQ prototype will be presented in detail in the paper. (C) 2014 Elsevier B.V. All rights reserved.

[1] R. Jameson,et al. Beam dynamics design of an RFQ for a planned accelerator, which uses a direct plasma injection scheme , 2008 .

[2] H. Zhao,et al. A 2.45 GHz intense proton source and low energy beam transport system for China Initiative Accelerator Driven Sub-Critical reactor system. , 2014, The Review of scientific instruments.

[3] Youjin Yuan,et al. Preliminary design and simulation of a 162.5 MHz high-intensity proton RFQ for an accelerator driven system , 2011 .

[4] Thomas P. Wangler,et al. RF linear accelerators , 2008 .

[5] Dale L. Schrage,et al. High power test of a 57-MHz CW RFQ. , 2006 .