论文信息 - Optimum fiber dispersion in high-speed TDM systems

Optimum fiber dispersion in high-speed TDM systems

Single-channel transmission at 40 Gb/s and above is investigated by numerical simulations with respect to optimal fiber dispersion. Since optimum dispersion depends on the bit rate nonzero dispersion shifted fiber is recommended for 40-Gb/s transmission and standard single-mode fiber for 160-Gb/s transmission.

K. Petermann | B. Konrad | K. Petermann | B. Konrad

[1] K. Petermann,et al. Comparison of NRZ- and RZ-modulation format for 40-Gb/s TDM standard-fiber systems , 1997, IEEE Photonics Technology Letters.

[2] F. Wallace. FIBER OPTICS. , 1965, Hospital topics.

[3] K. Petermann,et al. Unrepeated 40-Gb/s RZ single-channel transmission at 1.55 μm using various fiber types , 1998, IEEE Photonics Technology Letters.

[4] J. Wiesenfeld,et al. 40-Gb/s transmission over multiple 120-km spans of conventional single-mode fiber using highly dispersed pulses , 2000, IEEE Photonics Technology Letters.

[5] P. V. Mamyshev,et al. Pulse-overlapped dispersion-manageddata transmission and intrachannel four-wave mixing , 1999 .

[6] G. Raybon,et al. Intra-channel cross-phase modulation and four-wave mixing in high-speed TDM systems , 1999 .

[7] G. Mohs,et al. Performance limits of nonlinear RZ and NRZ coded transmission at 1O and 40 Gb/s on different fibers , 2000, Optical Fiber Communication Conference. Technical Digest Postconference Edition. Trends in Optics and Photonics Vol.37 (IEEE Cat. No. 00CH37079).

[8] M. Eiselt. Limits on WDM systems due to four-wave mixing: a statistical approach , 1999 .

[9] Polina Bayvel,et al. Improving the performance of 40 Gbit/s-based WDM transmission over standard fibre , 2000 .