Multi-scale modeling, stress and failure analyses of 3-D woven composites

The very complex, multi-level hierarchical construction of textile composites and their structural components commonly manifests via significant property variation even at the macro-level. The concept of a “meso-volume” (introduced by this author in early 1990s) is consistently applied in this work to 3-D stress/strain and failure analyses of 3-D woven composites at several levels of structural hierarchy. The meso-volume is defined as homogeneous, anisotropic block of composite material with effective elastic properties determined through volumetrically averaged 3-D stress and strain fields computed at a lower (“finer”) level of structural hierarchy and application of generalized Hooke’s law to the averaged fields. The meso-volume can represent a relatively large, homogenized section of a composite structural component, a lamina in laminated composite structure, a homogenized assembly of several textile composite unit cells, a single homogenized unit cell, a resin-impregnated yarn, a single carbon fiber, even a carbon nanotube assembly. When composed together, distinct meso-volumes constitute a 3-D Mosaic model at the respective hierarchy level. A multi-scale methodology presented in this paper first illustrates 3-D stress/strain analysis of the Mosaic unidirectional composite, computation of its effective elastic properties and their further use in 3-D stress/strain analysis of the Mosaic model of 3-D woven composite Unit Cell. The obtained 3-D stress/strain fields are then volumetrically averaged within the Unit Cell, and its effective elastic properties are computed. The predicted effective elastic properties of 3-D woven composite are compared with experimental data and show very good agreement. Further, those effective elastic properties are used in 3-D simulations of three-point bending tests of 3-D woven composite; theoretical predictions for central deflection show excellent agreement with experimental data. Finally, a 3-D progressive failure analysis of generic 3-D Mosaic structure is developed using ultimate strain criterion and illustrated on the 3-D woven composite Unit Cell. The predicted strength values are compared to experimental results. The presented comparisons of theoretical and experimental results validate the adequacy and accuracy of the developed material models, mathematical algorithms, and computational tools.

[1]  Ignace Verpoest,et al.  Micro-CT characterization of variability in 3D textile architecture , 2005 .

[2]  Alexander E. Bogdanovich,et al.  Three-dimensional variational theory of laminated composite plates and its implementation with Bernstein basis functions , 2000 .

[3]  Alexander E. Bogdanovich,et al.  Stochastic theory of composite materials with random waviness of the reinforcements , 1998 .

[4]  A. Bogdanovich,et al.  Material-smart analysis of textile-reinforced structures , 1996 .

[5]  L. Ye,et al.  Evaluation of thermo-elastic properties of three-dimensional orthogonal woven composites , 2002 .

[6]  G. Steven,et al.  Models for Predicting Thermomechanical Properties of Three-Dimensional Orthogonal Woven Composites , 1999 .

[7]  J. Brandt,et al.  Mechanical performance of composites based on various three-dimensional woven-fibre preforms , 1996 .

[8]  Christopher M. Pastore,et al.  A comparison of various 3-D approaches for the analysis of laminated composite structures , 1995 .

[9]  Sampe Europe,et al.  Material and process technology - the driver for tomorrow's improved performance, proceedings of the 25th International SAMPE Europe Conference 2004 of the Society for the Advancement of Materials and Process Engineering, Paris Expo, Porte de Versailles, Paris, March 30th-April, 2004 , 2004 .

[10]  Grant P. Steven,et al.  Behavior of 3D orthogonal woven CFRP composites. Part II. FEA and analytical modeling approaches , 2000 .

[11]  Ē. Palčevskis,et al.  Rheological Properties of Nanosized AlN Powder Suspensions for Advanced Ceramics , 2000 .

[12]  A. F. Kregers,et al.  Determination of the deformability of three-dimensionally reinforced composites by the stiffness averaging method , 1978 .

[13]  A. Bogdanovich,et al.  Fiber waviness in textile composites and its stochastic modeling , 2000 .

[14]  A. Lagzdins Orientational averaging in mechanics of solids , 1992 .

[16]  A. E. Bogdanovich,et al.  Three-dimensional variational analysis of Pagano's problems for laminated composite plates , 2000 .

[17]  Brian N. Cox,et al.  A binary model of textile composites—II. The elastic regime , 1995 .

[18]  B. N. Cox,et al.  The Macroscopic Elasticity of 3D Woven Composites , 1995 .

[19]  A. Bogdanovich,et al.  Three-dimensional stress field analysis in uniformly loaded, simply supported composite plates , 1994 .

[20]  J. Reddy,et al.  Local Mechanics Concepts for Composite Material Systems , 1992 .

[21]  P. Tan,et al.  Modeling Approaches for 3D Orthogonal Woven Composites , 1998 .

[22]  Grant P. Steven,et al.  A three-dimensional modelling technique for predicting the linear elastic property of opened-packing woven fabric unit cells , 1997 .

[23]  Grant P. Steven,et al.  Modelling for predicting the mechanical properties of textile composites : A review , 1997 .

[24]  V. Tamužs,et al.  Delamination properties of translaminar-reinforced composites , 2003 .

[25]  A. E. Bogdanovich,et al.  Three-dimensional variational impact contact analysis of composite bars and plates , 2000 .

[26]  I. H. Marshall,et al.  Proceedings of the American Society for Composites First Technical Conference: October 1986, Dayton, Ohio, USA, Technomic Publishing Co., Lancaster, PA, USA , 1987 .

[27]  T. Chou,et al.  Elastic Properties of Three-dimensional Angle-interlock Fabric Preforms , 1990 .

[28]  Alexander E. Bogdanovich,et al.  Progressive Failure Analysis of Adhesive Bonded Joints with Laminated Composite Adherends , 1999 .

[29]  G. Teters,et al.  Determination of the elastoplastic properties of spatially reinforced composites by the averaging method , 1981 .

[30]  B. P. Deepak,et al.  Three-dimensional analysis of thick composite plates with multiple layers , 1997 .

[31]  A. Bogdanovich,et al.  Applications of a meso-volume-based analysis for textile composite structures , 1993 .

[32]  Norman A. Fleck,et al.  A binary model of textile composites—I. Formulation , 1994 .

[33]  G. Teters,et al.  Structural model of deformation of anisotropic three-dimensionally reinforced composites , 1982 .

[34]  Satya N. Atluri,et al.  Atomic-level Stress Calculation and Continuum-Molecular System Equivalence , 2004 .

[35]  Tsu-Wei Chou,et al.  Microstructural design of fiber composites: Subject index , 1992 .