Semi-Active Magnetorheological Damper Device for Chatter Mitigation during Milling of Thin-Floor Components

This research was funded by Tecnologico de Monterrey through the Research Group of Nanotechnology for Devices Design, and by the Consejo Nacional de Ciencia y Tecnologia de Mexico (Conacyt), Project Numbers 242269, 255837, 296176, and National Lab in Additive Manufacturing, 3D Digitizing and Computed Tomography (MADiT) LN299129.

[2]  Francisco J. Campa,et al.  Characterization and stability analysis of a multivariable milling tool by the enhanced multistage homotopy perturbation method , 2012 .

[3]  Aitzol Lamikiz,et al.  Selection of cutting conditions for a stable milling of flexible parts with bull-nose end mills , 2007 .

[4]  Yusuf Altintas,et al.  Analytical Prediction of Three Dimensional Chatter Stability in Milling , 2001 .

[5]  G. Ahmed,et al.  Experimental Evaluation of Metal Cutting Coefficients under the Influence of Magneto-rheological Damping in End Milling Process , 2013 .

[6]  Stuart T. Smith,et al.  Damping of a thin-walled honeycomb structure using energy absorbing foam , 2005 .

[7]  Yusuf Altintas,et al.  Prediction of Ball End Milling Forces , 1996 .

[8]  Dong-Hoon Kim,et al.  Semiactive Magnetorheological Damper for High Aspect Ratio Boring Process , 2015, IEEE/ASME Transactions on Mechatronics.

[9]  Rong Mo,et al.  Stability Analysis of Milling Process with Multiple Delays , 2020, Applied Sciences.

[10]  Gábor Stépán,et al.  Updated semi‐discretization method for periodic delay‐differential equations with discrete delay , 2004 .

[11]  S. Nie,et al.  Research on Semi-Active Vibration Control of Pipeline Based on Magneto-Rheological Damper , 2020, Applied Sciences.

[12]  Li Cheng,et al.  Magnetorheological fluid dampers: A review on structure design and analysis , 2012 .

[13]  Min Wang,et al.  Chatter suppression based on nonlinear vibration characteristic of electrorheological fluids , 1999 .

[14]  Gábor Stépán,et al.  Multiple chatter frequencies in milling processes , 2003 .

[15]  Michael C. Constantinou,et al.  Semi-active control systems for seismic protection of structures: a state-of-the-art review , 1999 .

[16]  L. N. López de Lacalle Marcaide,et al.  Use of Magnetorheological Fluids for Vibration Reduction on the Milling of Thin Floor Parts , 2013 .

[17]  A. J. Gámez,et al.  Thin-Wall Machining of Light Alloys: A Review of Models and Industrial Approaches , 2019, Materials.

[18]  Yusuf Altintas,et al.  Prediction of ball-end milling forces from orthogonal cutting data , 1996 .

[19]  G. Urbikain,et al.  Stability contour maps with barrel cutters considering the tool orientation , 2017 .

[20]  Yusuf Altintas,et al.  Prediction of Milling Force Coefficients From Orthogonal Cutting Data , 1996 .

[21]  Dinghua Zhang,et al.  Stability improvement and vibration suppression of the thin-walled workpiece in milling process via magnetorheological fluid flexible fixture , 2017 .

[22]  Gilles Dessein,et al.  Toolpath dependent stability lobes for the milling of thin-walled parts , 2008 .

[23]  Yusuf Altintas,et al.  Mechanics and Dynamics of Ball End Milling , 1998 .

[24]  Berend Denkena,et al.  Workpiece and Tool Handling in Metal Cutting Machines , 2006 .

[25]  L. N. L. Lacalle,et al.  Approximate Solutions of Delay Differential Equations with Constant and Variable Coefficients by the Enhanced Multistage Homotopy Perturbation Method , 2015 .

[26]  Zichen Chen,et al.  Magnetorheological fluid-controlled boring bar for chatter suppression , 2009 .

[27]  Ciro A. Rodríguez,et al.  Determination of the stability lobes in milling operations based on homotopy and simulated annealing techniques , 2014 .

[28]  Zhou Kai,et al.  Multi-point location theory, method, and application for flexible tooling system in aircraft manufacturing , 2011 .

[29]  Şevki Çeşmeci,et al.  Modeling and Testing of a Field-Controllable Magnetorheological Fluid Damper , 2010 .

[30]  S. K. Choudhury,et al.  On-line control of machine tool vibration in turning operation using electro-magneto rheological damper , 2018 .

[31]  Alex Elías-Zúñiga,et al.  Improving Stability Prediction in Peripheral Milling of Al7075T6 , 2018, Applied Sciences.

[32]  D. Dvorak,et al.  Tool path strategies for high speed milling aluminum workpieces with thin webs , 1998 .

[33]  Francisco J. Campa,et al.  Chatter avoidance in the milling of thin floors with bull-nose end mills: Model and stability diagrams , 2011 .

[34]  Charles R. Farrar,et al.  The use of active materials for machining processes : A review , 2007 .