Bio-oil catalytic reforming without steam addition: Application to hydrogen production and studies on its mechanism

Abstract A novel process for hydrogen production via bio-oil catalytic reforming without steam addition was proposed. The liquid feedstock was a distillation fraction from crude bio-oil molecular distillation. The fraction obtained was enriched with the low-molecular-weight organics (acids, aldehydes, and ketones), and contained nearly all of the water from crude bio-oil. The highest catalytic performance, with a carbon conversion of 95% and a H 2 yield of 135 mg g −1 organics, was obtained by processing the distillate over Ni/Al 2 O 3 catalyst at 700 °C. The steam involved in the reforming reaction was derived entirely from the water in the crude bio-oil. The fresh and spent catalysts were characterized by N 2 -physisorption, thermogravimetric analysis, and high-resolution transmission electron microscopy. To further understand the reaction mechanisms, symmetric density functional theory calculations for decomposition were performed on four model compounds in bio-oil (acetic acid, hydroxyacetone, furfural, and phenol) over the Ni(111) surface. In addition, the decomposition of H 2 O∗ to OH∗ and O∗ and their subsequent steam reforming reactions with carbon precursors (CH∗ and CH 3 C∗) were also examined.

[1]  J. Dumesic,et al.  Reaction kinetics measurements and analysis of reaction pathways for conversions of acetic acid, ethanol, and ethyl acetate over silica-supported Pt , 2001 .

[2]  Chang-feng Yan,et al.  Hydrogen production from catalytic steam reforming of bio-oil aqueous fraction over Ni/CeO2–ZrO2 catalysts , 2010 .

[3]  W. Green,et al.  Computational Investigation of Thermochemistry and Kinetics of Steam Methane Reforming on Ni(111) under Realistic Conditions , 2009 .

[4]  Qian Liu,et al.  Pyrolysis characteristics of bio-oil fractions separated by molecular distillation , 2010 .

[5]  E. Molins,et al.  Cobalt hydrotalcite for the steam reforming of ethanol with scarce carbon production , 2012 .

[6]  G. Huber,et al.  Renewable Chemical Commodity Feedstocks from Integrated Catalytic Processing of Pyrolysis Oils , 2010, Science.

[7]  RENEWABLE GASOLINE PRODUCED BY CO-CRACKING OF METHANOL AND KETONES IN BIO-OIL , 2012 .

[8]  K. Takanabe,et al.  Steam reforming of acetic acid as a biomass derived oxygenate: Bifunctional pathway for hydrogen formation over Pt/ZrO2 catalysts , 2006 .

[9]  Tiejun Wang,et al.  Hydrotreatment of bio-oil over Ni-based catalyst. , 2013, Bioresource technology.

[10]  J. A. Medrano,et al.  Ni/Al–Mg–O solids modified with Co or Cu for the catalytic steam reforming of bio-oil , 2013 .

[11]  Chen Zhao,et al.  Upgrading pyrolysis oil over Ni/HZSM-5 by cascade reactions. , 2012, Angewandte Chemie.

[12]  J. A. Medrano,et al.  Hydrogen from aqueous fraction of biomass pyrolysis liquids by catalytic steam reforming in fluidized bed , 2011 .

[13]  Hui Lou,et al.  One-Step Hydrogenation-Esterification of Aldehyde and Acid to Ester over Bifunctional Pt Catalysts : A Model Reaction as Novel Route for Catalytic Upgrading of Fast Pyrolysis Bio-Oil , 2008 .

[14]  A. Bridgwater.  Review of fast pyrolysis of biomass and product upgrading , 2012 .

[15]  S. Voutetakis,et al.  Hydrogen Production via Steam Reforming of the Aqueous Phase of Bio-Oil in a Fixed Bed Reactor , 2006 .

[16]  Qian Liu,et al.  Separation of bio-oil by molecular distillation , 2009 .

[17]  Kresse,et al.  Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. , 1996, Physical review. B, Condensed matter.

[18]  D. Resasco,et al.  Selective conversion of furfural to methylfuran over silica-supported NiFe bimetallic catalysts , 2011 .

[19]  Qianqian Yin,et al.  Effects of Preparation Method on the Performance of Ni/Al2O3 Catalysts for Hydrogen Production by Bio-Oil Steam Reforming , 2012, Applied Biochemistry and Biotechnology.

[20]  J. Valyon,et al.  Steam reforming of bio-oil from pyrolysis of MBM over particulate and monolith supported Ni/γ-Al2O3 catalysts , 2013 .

[21]  Shuirong Li,et al.  Hydrogen Production via Glycerol Steam Reforming over Ni/Al2O3: Influence of Nickel Precursors , 2013 .

[22]  K. Pant,et al.  Hydrogen production by steam reforming of model bio-oil using structured Ni/Al2O3 catalysts , 2013 .

[23]  Quanxin Li,et al.  Directional synthesis of liquid higher olefins through catalytic transformation of bio-oil. , 2014 .

[24]  Shurong Wang,et al.  Catalytic conversion of carboxylic acids in bio-oil for liquid hydrocarbons production , 2012 .

[25]  Zhong-yang Luo,et al.  Experimental research on acetic acid steam reforming over Co–Fe catalysts and subsequent density functional theory studies , 2012 .

[26]  Olivier Jacquet,et al.  Cover Picture: A Diagonal Approach to Chemical Recycling of Carbon Dioxide: Organocatalytic Transformation for the Reductive Functionalization of CO2 (Angew. Chem. Int. Ed. 1/2012) , 2012 .

[27]  G. Laurenczy,et al.  Formic acid as a hydrogen source – recent developments and future trends , 2012 .

[28]  Lin Wei,et al.  An Exploration of Improving the Properties of Heavy Bio-oil , 2013 .

[29]  Bifunctional Pd/Al-SBA-15 catalyzed one-step hydrogenation–esterification of furfural and acetic acid: A model reaction for catalytic upgrading of bio-oil , 2011 .

[30]  Christopher W. Jones,et al.  Stability of Zeolites in Hot Liquid Water , 2010 .

[31]  K. Takanabe,et al.  Sustainable hydrogen from bio-oil - Steam reforming of acetic acid as a model oxygenate , 2004 .

[32]  G. Kresse,et al.  Ab initio molecular dynamics for liquid metals. , 1993 .

[33]  Quanxin Li,et al.  Production of aromatics through current-enhanced catalytic conversion of bio-oil tar. , 2013, Bioresource technology.

[34]  Shengnian Wang,et al.  Hydrodeoxygenation of bio-oil over Pt-based supported catalysts: importance of mesopores and acidity of the support to compounds with different oxygen contents , 2013 .

[35]  Yuguang Ma,et al.  Kinetics and mechanism of hydrogenation of furfural on Cu/SiO2 catalysts , 2011 .

[36]  Hui Lou,et al.  One-step hydrogenation-esterification of furfural and acetic acid over bifunctional Pd catalysts for bio-oil upgrading. , 2011, Bioresource technology.

[37]  Zhong-yang Luo,et al.  Bio-gasoline production from co-cracking of hydroxypropanone and ethanol , 2013 .

[38]  J. Bilbao,et al.  Operating conditions for attenuating Ni/La2O3–αAl2O3 catalyst deactivation in the steam reforming of bio-oil aqueous fraction , 2013 .

[39]  Rasmus Trane,et al.  Catalytic steam reforming of bio-oil , 2012 .

[40]  Stefan Czernik,et al.  Hydrogen by Catalytic Steam Reforming of Liquid Byproducts from Biomass Thermoconversion Processes , 2002 .

[41]  F. Meunier,et al.  Steam reforming of model compounds and fast pyrolysis bio-oil on supported noble metal catalysts , 2005 .

[42]  G. Huber,et al.  Experimental and DFT studies of the conversion of ethanol and acetic acid on PtSn-based catalysts. , 2005, The journal of physical chemistry. B.

[43]  Xin Li,et al.  Separation characteristics of biomass pyrolysis oil in molecular distillation , 2010 .

[44]  G. Kresse,et al.  Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set , 1996 .

[45]  Chen Zhao,et al.  Highly selective catalytic conversion of phenolic bio-oil to alkanes. , 2009, Angewandte Chemie.

[46]  Robert J. Evans,et al.  Hydrogen from biomass-production by steam reforming of biomass pyrolysis oil ☆ , 2007 .