Improving electric power generation of a standalone wave energy converter via optimal electric load control

This paper aims to investigate electric dynamics and improve electric power generation of an isolated wave energy converter that uses a linear permanent magnet generator as the power take-off system, excited by regular or irregular waves. This is of significant concern when considering actual operating conditions of an offshore wave energy converter, where the device will encounter different sea states and its electric load needs to be tuned on a sea-state-to-sea-state basis. To that end, a fully coupled fluid-mechanical-electric-magnetic-electronic mathematical model and an optimization routine are developed. This proposed time-domain wave-to-wire model is used to simulate the hydrodynamic and electric response of a wave energy converter connected to specific electric loads and also used in an optimization routine that searches optimal resistive load value for a wave energy converter under specific sea states. Sample results are presented for a point-absorber type wave energy converter, showing that the electric power generation of a device under irregular waves can be significantly improved.

[1]  T. Moan,et al.  Optimal Geometries for Wave Absorbers Oscillating About a Fixed Axis , 2013, IEEE Journal of Oceanic Engineering.

[2]  Jan Isberg,et al.  Nonlinear Passive Control of a Wave Energy Converter Subject to Constraints in Irregular Waves , 2015 .

[3]  Elisabetta Tedeschi,et al.  Review of control strategies for wave energy conversion systems and their validation: the wave-to-wire approach , 2018 .

[4]  Malin Göteman,et al.  Performance optimization of a coaxial-cylinder wave energy converter , 2019, Energy.

[5]  John Ringwood,et al.  A high-fidelity wave-to-wire model for wave energy converters , 2019, Renewable Energy.

[6]  Mats Leijon,et al.  Electrical damping of linear generators for wave energy converters—A review , 2015 .

[7]  Aurélien Babarit,et al.  A wave-to-wire model of the SEAREV wave energy converter , 2007 .

[8]  A. Clément,et al.  Wave energy in Europe: current status and perspectives , 2002 .

[9]  Mats Leijon,et al.  Review on electrical control strategies for wave energy converting systems , 2014 .

[10]  Jon Andreu,et al.  Review of wave energy technologies and the necessary power-equipment , 2013 .

[11]  Markus Mueller,et al.  Power Conditioning of the Output from a Linear Vernier Hybrid Permanent Magnet Generator for using Direct Drive Wave Energy Converters , 2005 .

[12]  Segen F. Estefen,et al.  A geometrical optimization method applied to a heaving point absorber wave energy converter , 2018 .

[13]  Yucheng Liu,et al.  Frequency and time domain modeling and power output for a heaving point absorber wave energy converter , 2014 .

[14]  John Ringwood,et al.  A Review of Wave-to-Wire Models for Wave Energy Converters , 2016 .

[15]  Aurélien Babarit,et al.  Effect of non-ideal power take-off on the energy absorption of a reactively controlled one degree of freedom wave energy converter , 2014 .

[16]  Mats Leijon,et al.  Experimental Results From an Offshore Wave Energy Converter , 2010 .

[17]  Rafael Waters,et al.  Energy from Ocean Waves : Full Scale Experimental Verification of a Wave Energy Converter , 2008 .

[18]  John B. Shoven,et al.  I , Edinburgh Medical and Surgical Journal.

[19]  Abdus Samad,et al.  Development of a reduced order wave to wire model of an OWC wave energy converter for control system analysis , 2019, Ocean Engineering.

[20]  Bradley J. Buckham,et al.  Wave-to-wire simulation of a floating oscillating water column wave energy converter , 2016 .

[21]  Mats Leijon,et al.  Analysis of linear wave power generator model with real sea experimental results , 2013 .

[22]  António F.O. Falcão,et al.  Wave energy utilization: A review of the technologies , 2010 .

[23]  A. Robin Wallace,et al.  A Fully Coupled Wave-to-Wire Model of an Array of Wave Energy Converters , 2016, IEEE Transactions on Sustainable Energy.

[24]  P ? ? ? ? ? ? ? % ? ? ? ? , 1991 .

[25]  Linnea Sjökvist,et al.  On the Optimization of Point Absorber Buoys , 2014 .

[26]  Umesh A. Korde,et al.  Control system applications in wave energy conversion , 2000, OCEANS 2000 MTS/IEEE Conference and Exhibition. Conference Proceedings (Cat. No.00CH37158).

[27]  Paula B. Garcia-Rosa,et al.  Control-Informed Geometric Optimization of Wave Energy Converters: The Impact of Device Motion and Force Constraints , 2015 .

[28]  Hua Liu,et al.  A Shape Optimization Method of a Specified Point Absorber Wave Energy Converter for the South China Sea , 2018, Energies.

[29]  Jeremiah Pastor,et al.  Power Absorption Modeling and Optimization of a Point Absorbing Wave Energy Converter Using Numerical Method , 2014 .

[30]  M. Leijon,et al.  Experimental results from sea trials of an offshore wave energy system , 2007 .

[31]  Yucheng Liu,et al.  Time Domain Modeling and Power Output for a Heaving Point Absorber Wave Energy Converter , 2014 .

[32]  R. Patton,et al.  Numerical and experimental studies of excitation force approximation for wave energy conversion , 2018, Renewable Energy.

[33]  G. Lavidas.  Selection index for Wave Energy Deployments (SIWED): A near-deterministic index for wave energy converters , 2020, Energy.

[34]  R. Boukenoui,et al.  A new Golden Section method-based maximum power point tracking algorithm for photovoltaic systems , 2016 .

[35]  Johannes Falnes,et al.  A REVIEW OF WAVE-ENERGY EXTRACTION , 2007 .

[36]  Marta Molinas,et al.  Exploring the Potential for Increased Production from the Wave Energy Converter Lifesaver by Reactive Control , 2013 .