Influence of thermal treatment on the conductivity and morphology of PEDOT/PSS films

[1]  Hassen Maaref,et al.  Hole injection and transport in ITO/PEDOT/PVK/Al diodes , 2002 .

[2]  D. Bradley,et al.  Charge separation in polyflourene composites with internal donor/acceptor heterojunctions , 2002 .

[3]  Zakya H. Kafafi,et al.  Hole injection barriers at polymer anode/small molecule interfaces , 2001 .

[4]  Donal D. C. Bradley,et al.  Quantifying the efficiency of electrodes for positive carrier injection into poly(9,9-dioctylfluorene) and representative copolymers , 2001 .

[5]  M.J.A. de Voigt,et al.  Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes , 2000 .

[6]  J. Reynolds,et al.  Poly(3,4‐ethylenedioxythiophene) and Its Derivatives: Past, Present, and Future , 2000 .

[7]  L. Pettersson,et al.  Structure of thin films of poly(3,4-ethylenedioxythiophene) , 1999 .

[8]  A. Heeger,et al.  Doped poly(3,4-ethylenedioxythiophene) films: Thermal, electromagnetical and morphological analysis , 1999 .

[9]  Yang Yang,et al.  Polymer/metal interfaces and the performance of polymer light-emitting diodes , 1998 .

[10]  Alan J. Heeger,et al.  Polymer light-emitting diodes with polyethylene dioxythiophene–polystyrene sulfonate as the transparent anode , 1997 .

[11]  Josef Hormes,et al.  The thermal ageing of poly(3,4-ethylenedioxythiophene). An investigation by X-ray absorption and X-ray photoelectron spectroscopy , 1995 .

[12]  R. N. Marks,et al.  Light-emitting diodes based on conjugated polymers , 1990, Nature.