How to embed three-dimensional flexible electrodes in microfluidic devices for cell culture applications.

This communication describes a simple, rapid and cost effective method of embedding a conductive and flexible material within microfluidic devices as a means to realize uniform electric fields within cellular microenvironments. Fluidic channels and electrodes are fabricated by traditional soft-lithography in conjunction with chemical etching of PDMS. Devices can be deformable (thus allowing for a combination of electro-mechanical stimulation), they are made from inexpensive materials and easily assembled by hand; this method is thus accessible to a wide range of laboratories and budgets.

[1]  Realization and efficiency evaluation of a micro-photocatalytic cell prototype for real-time blood oxygenation. , 2011, Medical engineering & physics.

[2]  M. Dickey,et al.  Inherently aligned microfluidic electrodes composed of liquid metal. , 2011, Lab on a chip.

[3]  J. Ralston,et al.  Microplasma patterning of bonded microchannels using high-precision "injected" electrodes. , 2011, Lab on a chip.

[4]  Joel Voldman,et al.  Surface-patterned electrode bioreactor for electrical stimulation. , 2010, Lab on a chip.

[5]  L. Draghi,et al.  Embedding of Flexible Electrodes in a Microfluidic Device for Cell Electrical Stimulation , 2010 .

[6]  Milica Radisic,et al.  Electrical stimulation systems for cardiac tissue engineering , 2009, Nature Protocols.

[7]  Jan C T Eijkel,et al.  Nanochannels in SU-8 with floor and ceiling metal electrodes and integrated microchannels. , 2008, Lab on a chip.

[8]  Noo Li Jeon,et al.  Dielectrophoresis switching with vertical sidewall electrodes for microfluidic flow cytometry. , 2007, Lab on a chip.

[9]  C. Cannizzaro,et al.  Practical aspects of cardiac tissue engineering with electrical stimulation. , 2007, Methods in molecular medicine.

[10]  Stephan Herminghaus,et al.  Controlled electrocoalescence in microfluidics: Targeting a single lamella , 2006 .

[11]  P. Tabeling,et al.  Slippage of water past superhydrophobic carbon nanotube forests in microchannels. , 2006, Physical review letters.

[12]  Chih-Ming Ho,et al.  Effective slip and friction reduction in nanograted superhydrophobic microchannels , 2006 .

[13]  N. Mosier,et al.  Surface engineering of microchannel walls for protein separation and directed microfluidic flow. , 2006, Journal of separation science.

[14]  Junfeng Zhang,et al.  Contact line and contact angle dynamics in superhydrophobic channels. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[15]  Rashid Bashir,et al.  Reliable fabrication method of transferable micron scale metal pattern for poly(dimethylsiloxane) metallization. , 2006, Lab on a chip.

[16]  J. H. Wang,et al.  An Introductory Review of Cell Mechanobiology , 2006, Biomechanics and modeling in mechanobiology.

[17]  Marc J Madou,et al.  3‐D electrode designs for flow‐through dielectrophoretic systems , 2005, Electrophoresis.

[18]  Ralph G. Nuzzo,et al.  Fabrication of Stable Metallic Patterns Embedded in Poly(dimethylsiloxane) and Model Applications in Non‐Planar Electronic and Lab‐on‐a‐Chip Device Patterning , 2005 .

[19]  Christopher S. Chen,et al.  Cell shape, cytoskeletal tension, and RhoA regulate stem cell lineage commitment. , 2004, Developmental cell.

[20]  C. Simmons,et al.  Cyclic strain enhances matrix mineralization by adult human mesenchymal stem cells via the extracellular signal-regulated kinase (ERK1/2) signaling pathway. , 2003, Journal of biomechanics.

[21]  G. Whitesides,et al.  Topographical Micropatterning of Poly(dimethylsiloxane) Using Laminar Flows of Liquids in Capillaries , 2001 .

[22]  G. Whitesides,et al.  Fabrication of microfluidic systems in poly(dimethylsiloxane) , 2000, Electrophoresis.