Ultrasonic-Assisted Spin-Coating: Improved Junction by Enhanced Permeation of a Coating Material within Nanostructures.

Over the last decades, the spin-coating (SC) technique has been widely used to prepare thin films of various materials in the liquid phase on arbitrary substrates. The technique simply relies on the centrifugal force to spread a coating solution radially outward over the substrate. This mechanism works fairly well for solutions with low surface tension to form thin films of reasonable junctions on smooth substrates. Here, we present a modified SC technique, namely, ultrasonic-assisted spin-coating (UASC), to form thin films of coating solution having high surface tension on rough substrates with excellent junctions. The UASC technique couples SC with an external ultrasonic wave generator to provide external perturbation to locally break down big drops of the coating material into smaller droplets via Rayleigh instability. Because of their lower mass, these tiny droplets gain low momenta and move slowly both in radial and azimuthal directions, giving them an enough time to effectively permeate within pores, thereby yielding excellent junctions. Furthermore, we also investigated the effect of junction improvement on conventional and inverted bulk heterojunction organic solar cells. Intriguingly, the organic solar cells fabricated by the UASC method showed an improved efficiency compared to typical SC owing to efficient charge transfer across the junction. These results clearly imply that UASC is a simple and powerful technique which can significantly enhance the device performance by improving the junction. Moreover, we believe that UASC can be more effective for the preparation of devices composed of multilayers of different materials having complicated nanostructures.

[1]  T. Bein,et al.  Spray Deposition of Titania Films with Incorporated Crystalline Nanoparticles for All‐Solid‐State Dye‐Sensitized Solar Cells Using P3HT , 2016 .

[2]  H. Lee,et al.  Polyfluorene Derivatives are High‐Performance Organic Hole‐Transporting Materials for Inorganic−Organic Hybrid Perovskite Solar Cells , 2014 .

[3]  Zhenan Bao,et al.  Ultra-high mobility transparent organic thin film transistors grown by an off-centre spin-coating method , 2014, Nature Communications.

[4]  H. Snaith,et al.  Low-temperature processed meso-superstructured to thin-film perovskite solar cells , 2013 .

[5]  L. Guo,et al.  Optimization of thermally reduced graphene oxide for an efficient hole transport layer in polymer solar cells , 2013 .

[6]  Gregory C. Welch,et al.  Improvement of Interfacial Contacts for New Small‐Molecule Bulk‐Heterojunction Organic Photovoltaics , 2012, Advanced materials.

[7]  D. Y. Kim,et al.  Improved performance of dye-sensitized solar cells with compact TiO2 blocking layer prepared using low-temperature reactive ICP-assisted DC magnetron sputtering , 2012 .

[8]  Byungwoo Park,et al.  The effect of TiCl4-treated TiO2 compact layer on the performance of dye-sensitized solar cell , 2012 .

[9]  John R. Reynolds,et al.  High-efficiency inverted dithienogermole–thienopyrrolodione-based polymer solar cells , 2011, Nature Photonics.

[10]  F. Fabregat‐Santiago,et al.  Characterization of nanostructured hybrid and organic solar cells by impedance spectroscopy. , 2011, Physical chemistry chemical physics : PCCP.

[11]  N. Park,et al.  Enhanced charge collection efficiency by thin-TiO2-film deposition on FTO-coated ITO conductive oxide in dye-sensitized solar cells , 2010 .

[12]  B. Alder,et al.  Atomistic methods in fluid simulation , 2010, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[13]  Shixin Wu,et al.  Electrochemical deposition of ZnO nanorods on transparent reduced graphene oxide electrodes for hybrid solar cells. , 2010, Small.

[14]  Yoshitaka Kawahara,et al.  Characterization of inverted-type organic solar cells with a ZnO layer as the electron collection electrode by ac impedance spectroscopy. , 2009, ACS applied materials & interfaces.

[15]  A. Rudawska,et al.  Analysis for determining surface free energy uncertainty by the Owen–Wendt method , 2009 .

[16]  Porun Liu,et al.  An efficient and low-cost TiO2 compact layer for performance improvement of dye-sensitized solar cells , 2009 .

[17]  Tadashi Ito,et al.  Enhanced Conversion Efficiencies of Cu2ZnSnS4-Based Thin Film Solar Cells by Using Preferential Etching Technique , 2008 .

[18]  Juhwan Kim,et al.  Fabrication of organic bulk heterojunction solar cells by a spray deposition method for low-cost power generation , 2007 .

[19]  Liyuan Han,et al.  Improvement of efficiency of dye-sensitized solar cells based on analysis of equivalent circuit , 2006 .

[20]  Ashraful Islam,et al.  Modeling of an equivalent circuit for dye-sensitized solar cells : improvement of efficiency of dye-sensitized solar cells by reducing internal resistance , 2006 .

[21]  Ryuji Kikuchi,et al.  Impedance Analysis of Internal Resistance Affecting the Photoelectrochemical Performance of Dye-Sensitized Solar Cells , 2005 .

[22]  Rafael Tadmor,et al.  Line energy and the relation between advancing, receding, and young contact angles. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[23]  Takehito Mitate,et al.  Modeling of an equivalent circuit for dye-sensitized solar cells , 2004 .

[24]  L. Schwartz,et al.  Theoretical and numerical results for spin coating of viscous liquids , 2004 .

[25]  E. Chibowski.  Surface free energy of a solid from contact angle hysteresis. , 2003, Advances in colloid and interface science.

[26]  S. Ray.  Preparation of copper oxide thin film by the sol-gel-like dip technique and study of their structural and optical properties , 2001 .

[27]  D. Birnie.  Rational solvent selection strategies to combat striation formation during spin coating of thin films , 2001 .

[28]  L. Hołysz.  Investigation of the effect of substrata on the surface free energy components of silica gel determined by thin layer wicking method , 2000 .

[29]  Cherie R. Kagan,et al.  Organic-inorganic hybrid materials as semiconducting channels in thin-film field-effect transistors , 1999, Science.

[30]  Norio Miura,et al.  PREPARATION OF INDIUM OXIDE THIN FILM BY SPIN-COATING METHOD AND ITS GAS-SENSING PROPERTIES , 1998 .

[31]  John H. Scofield,et al.  Sputtered molybdenum bilayer back contact for copper indium diselenide-based polycrystalline thin-film solar cells , 1995 .

[32]  Wiesław Wójcik,et al.  Determination of the Components of the Surface Tension of Some Liquids from Interfacial Liquid-Liquid Tension Measurements , 1993 .

[33]  D. Sharp.  An overview of Rayleigh-Taylor instability☆ , 1984 .

[34]  M. Sain,et al.  Deposition of PEDOT: PSS nanoparticles as a conductive microlayer anode in OLEDs device by desktop inkjet printer , 2011 .

[35]  Emin Caglan Kumbur,et al.  Characterization of Interfacial Structure in PEFCs: Water Storage and Contact Resistance Model , 2010 .

[36]  Saliha Ilican,et al.  Preparation and characterization of ZnO thin films deposited by sol-gel spin coating method , 2008 .