Algebraic 3D Graphic Statics: Constrained Areas

This research provides algorithms and numerical methods to geometrically control the magnitude of the internal and external forces in the reciprocal diagrams of 3D/Polyhedral Graphic statics (3DGS). In 3DGS, the form of the structure and its equilibrium of forces is represented by two polyhedral diagrams that are geometrically and topologically related. The areas of the faces of the force diagram represent the magnitude of the internal and external forces in the system. For the first time, the methods of this research allow the user to control and constrain the areas and edge lengths of the faces of general polyhedrons that can be convex, self-intersecting, or concave. As a result, a designer can explicitly control the force magnitudes in the force diagram and explore the equilibrium of a variety of compression and tension-combined funicular structural forms. In this method, a quadratic formulation is used to compute the area of a single face based on its edge lengths. The approach is applied to manipulating the face geometry with a predefined area and the edge lengths. Subsequently, the geometry of the polyhedron is updated with newly changed faces. This approach is a multi-step algorithm where each step includes computing the geometry of a single face and updating the polyhedral geometry. One of the unique results of this framework is the construction of the zero-area, self-intersecting faces, where the sum of the signed areas of a self-intersecting face is zero, representing a member with zero force in the form diagram. The methodology of this research can clarify the equilibrium of some systems that could not be previously justified using reciprocal polyhedral diagrams. Therefore, it generalizes the principle of the equilibrium of polyhedral frames and opens a completely new horizon in the design of highly-sophisticated funicular polyhedral structures beyond compression-only systems.

[1]  Philippe Block,et al.  Thrust Network Analysis : exploring three-dimensional equilibrium , 2009 .

[2]  Berthold K. P. Horn.  Extended Gaussian images , 1984, Proceedings of the IEEE.

[3]  Allan McRobie,et al.  Graphic kinematics, visual virtual work and elastographics , 2017, Royal Society Open Science.

[4]  Caitlin Mueller,et al.  Developing Algebraic Constraints for Reciprocal Polyhedral Diagrams of 3 D Graphic Statics , 2018 .

[5]  Philippe Block,et al.  Design, Cultivation and Application of Load-Bearing Mycelium Components , 2017 .

[6]  Masoud Akbarzadeh,et al.  Geometric Degrees of Freedom and Non-conventional Spatial Structural Forms , 2019, Impact: Design With All Senses.

[7]  Seung Chul Han,et al.  A New Type of Low Density Material: Shellular , 2015, Advanced materials.

[8]  H. Helmholtz,et al.  Mathematical and Physical Papers , 1885, Nature.

[9]  Waclaw Zalewski,et al.  Shaping Structures: Statics , 1997 .

[10]  Philippe Block,et al.  On the equilibrium of funicular polyhedral frames and convex polyhedral force diagrams , 2015, Comput. Aided Des..

[11]  H. Schek.  The force density method for form finding and computation of general networks , 1974 .

[12]  William F. Baker,et al.  Mechanisms and states of self-stress of planar trusses using graphic statics, part I: The fundamental theorem of linear algebra and the Airy stress function , 2016 .

[13]  M. Akbari,et al.  Geometry-based structural form-finding to design architected cellular solids , 2020, SCF.

[14]  Yi Guo,et al.  Algebraic 3D graphic statics: Reciprocal constructions , 2019, Comput. Aided Des..

[15]  Philippe Block,et al.  THRUST NETWORK ANALYSIS : A NEW METHODOLOGY FOR THREE-DIMENSIONAL EQUILIBRIUM , 2007 .

[16]  Allan McRobie,et al.  Polarities in structural analysis and design: n-dimensional graphic statics and structural transformations , 2018, International Journal of Solids and Structures.

[17]  Lauren L. Beghini,et al.  Rankine’s Theorem for the design of cable structures , 2013 .

[18]  Philippe Block,et al.  GEOMETRY-BASED UNDERSTANDING OF STRUCTURES , 2012 .

[19]  William Thomson,et al.  Mathematical and physical papers , 1880 .

[20]  Matthias Rippmann,et al.  Funicular Shell Design: Geometric approaches to form finding and fabrication of discrete funicular structures , 2016 .

[21]  Mohammad Bolhassani,et al.  On Structural Behavior of a Funicular Concrete Polyhedral Frame Designed by 3D Graphic Statics , 2018, Structures.

[22]  M. Ashby,et al.  The mechanics of three-dimensional cellular materials , 1982, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[23]  A. Dresden.  The fourteenth western meeting of the American Mathematical Society , 1920 .

[24]  Philippe Block,et al.  Interactive Vault Design , 2012 .

[25]  Corentin Fivet,et al.  The Papers of Maurice Koechlin (1856-1946) , 2015 .

[27]  Allan McRobie,et al.  The geometry of structural equilibrium , 2017, Royal Society Open Science.

[28]  J. Maxwell,et al.  XLV. On reciprocal figures and diagrams of forces , 1864 .

[29]  Joseph O'Rourke.  Convex Polyhedra Realizing Given Face Areas , 2011, ArXiv.

[30]  Philippe Block,et al.  3D Graphic Statics: Geometric Construction of Global Equilibrium , 2015 .

[31]  Philippe Block,et al.  Disjointed force polyhedra , 2018, Comput. Aided Des..

[32]  James Clerk Maxwell,et al.  The Scientific Papers of James Clerk Maxwell: On Reciprocal Figures and Diagrams of Forces , 2011 .

[33]  Corentin Fivet,et al.  Vector-Based 3D graphic statics (Part III): Designing with Combinatorial Equilibrium Modelling , 2016 .

[34]  M. Bolhassani,et al.  The Design of an Ultra-Transparent Funicular Glass Structure , 2019, Structures Congress 2019.

[35]  Y. Takane,et al.  Generalized Inverse Matrices , 2011 .

[36]  Jacques Heyman,et al.  The Stone Skeleton: Structural Engineering of Masonry Architecture , 1997 .

[37]  Corentin Fivet,et al.  Constraint-Based Graphic Statics : New paradigms of computer-aided structural equilibrium design , 2013 .

[38]  Juney Lee,et al.  Computational Design Framework for 3D Graphic Statics , 2019 .

[39]  W. J. Macquorn Rankine,et al.  XVII. Principle of the equilibrium of polyhedral frames , 1864 .

[40]  James J. Little,et al.  An iterative method for reconstructing convex polyhedra from extended gaussian images , 1983, AAAI 1983.

[41]  S. Moni.  A closed-form solution for the reconstruction of a convex polyhedron from its extended Gaussian image , 1990, [1990] Proceedings. 10th International Conference on Pattern Recognition.

[42]  Walter Whiteley,et al.  Convex Polyhedra, Dirichlet Tessellations, and Spider Webs , 2013 .

[43]  Philippe Block,et al.  Algebraic graph statics , 2014, Comput. Aided Des..

[44]  Luigi Cremona,et al.  Graphical Statics: Two Treatises on the Graphical Calculus and Reciprocal Figures in Graphical Statics , 2007 .

[45]  S. Pellegrino,et al.  Matrix analysis of statically and kinematically indeterminate frameworks , 1986 .

[46]  Julius Wolff,et al.  The Classic: On the Inner Architecture of Bones and its Importance for Bone Growth , 2010, Clinical orthopaedics and related research.

[47]  Allan McRobie,et al.  Maxwell and Rankine reciprocal diagrams via Minkowski sums for two-dimensional and three-dimensional trusses under load , 2016 .