Effect of Steel Confinement on Axially Loaded Short Concrete Columns

This paper presents experimental investigations of Reinforced Concrete columns strengthened with steel strips and steel jacket under axial compression loading. Total of six specimens were prepared in the laboratory, out of which; 1) two columns were unconfined columns, 2) two columns were strengthened with steel strips and 3) remaining two columns were strengthened with a steel jacket. All specimens were subjected to axial compression loading in increment until the failure of specimens using UTM at NUST. It was concluded after the experimental work that the steel strips enhanced axial load carrying capacity by a factor up to 1.54 times and steel jacketing enhanced the capacity by a factor of 2.38. It has also been observed that the steel confinement increased the cracking load by a factor up to 1.5 to 2.66 for strips and jacketing respectively. The failure occurred due to the crushing of concrete and buckling of steel strips and jacket between the fasteners. The steel strips and jackets are economical and feasible options for confining the concrete to increase its axial load carrying capacity.

[1]  Jason Ingham,et al.  Design Expression for the In-plane Shear Strength of Reinforced Concrete Masonry , 2007 .

[2]  Salvador Ivorra,et al.  Axially loaded RC columns strengthened by steel caging. Finite element modelling , 2009 .

[3]  Hatem M. Mohamed,et al.  Behavior of reinforced concrete columns strengthened by steel jacket , 2015 .

[4]  Asad Hanif,et al.  An investigation on the behavior of a new connection for precast structures under reverse cyclic loading , 2018, Engineering Structures.

[5]  Giuseppe Campione,et al.  Simplified Model for Compressive Behavior of Concrete Columns Strengthened by Steel Angles and Strips , 2010 .

[6]  Mete A. Sozen FROM DUZCE TO THE CITY , 2006 .

[7]  Audrey,et al.  Strengthening method of concrete structure , 2018 .

[8]  Amit Kumar Das,et al.  Design of propping schemes of 60-storey reinforced concrete building: a case study , 2017 .

[9]  Salvador Ivorra,et al.  Design strength of axially loaded RC columns strengthened by steel caging , 2009 .

[10]  Ahmed M. Tarabia,et al.  Strengthening of RC columns by steel angles and strips , 2014 .

[11]  Guney Ozcebe,et al.  ADVANCES IN EARTHQUAKE ENGINEERING FOR URBAN RISK REDUCTION , 2006 .

[12]  Michel Bruneau,et al.  Seismic Retrofitting of Low-Rise Masonry and Concrete Walls Using Steel Strips , 2000 .

[13]  Pei-Ching Chen,et al.  Seismic steel jacketing of rectangular RC bridge columns for the mitigation of lap‐splice failures , 2010 .

[14]  Jong-Su Jeon,et al.  Effect of steel wrapping jackets on the bond strength of concrete and the lateral performance of circular RC columns , 2013 .

[15]  L. Cirtek,et al.  RC columns strengthened with bandage — experimental programme and design recommendations , 2001 .

[16]  C.-T. T. Hsu,et al.  Flexural strengthening of reinforced concrete beams using carbon fibre reinforced polymer strips , 2003 .

[17]  N. Areemit,et al.  STRENGTHENING OF DEFICIENT RC COLUMNS BY STEEL ANGLES AND BATTENS UNDER AXIAL LOAD , 2013 .