Cradle-to-cradle modeling of the future steel flow in China

China is the biggest steel producer and consumer in the world. Therefore, it is important to understand the dynamic mechanisms of the steel flow, to forecast the future trends, as well as evaluate different improvement measures. Although the previous models are able to depict the dynamic material flow, the market dynamics are excluded such as production capacity planning, the cost competitiveness of each route, the market prices of resources, etc. This paper presents a cradle to cradle model to describe the comprehensive mechanism of the steel lifecycle by combing both material and market dynamics. The model is used to predict and quantify the future steel flow in China from 2012 to 2100. The results confirm that the secondary (from scrap) steel production share will increase along with the sufficient scrap supply in the long term. Meanwhile, the analyses also highlight that market dynamics has a profound impact on the steel flow. With the aim of promoting sustainable thinking in steel production and usage, this paper focuses on a number of material efficiency strategies and investigates their impact by using what-if scenario analyses. The results indicate that the benefit of reuse and remanufacturing scrap is limited when the generation of scrap is insufficient in the next two or three decades. The analyses also identified two strategies (i.e. less material for same service and more intensive use) are effective measures to improve the sustainability in China steel industry.

[1]  Antonio Soria,et al.  Modelling energy technology dynamics: methodology for adaptive expectations models with learning by doing and learning by searching , 2000 .

[2]  I. Daigo,et al.  Outlook of the world steel cycle based on the stock and flow dynamics. , 2010, Environmental science & technology.

[3]  Patroklos Georgiadis,et al.  A system dynamics model for dynamic capacity planning of remanufacturing in closed-loop supply chains , 2007, Comput. Oper. Res..

[4]  László Szabó,et al.  Technological prospects and CO2 emission trading analyses in the iron and steel industry: A global model , 2005 .

[5]  Erik Pruyt,et al.  Scarcity of Minerals and Metals: A Generic Exploratory System Dynamics Model , 2010 .

[6]  D. Singer,et al.  Physical factors that could restrict mineral supply , 1981 .

[7]  Roland Clift,et al.  Time-dependent material flow analysis of iron and steel in the UK: Part 1: Production and consumption trends 1970-2000 , 2007 .

[8]  Philippe Quirion,et al.  European Emission Trading Scheme and competitiveness: A case study on the iron and steel industry , 2008 .

[9]  Sandra C. Fuchs,et al.  HIV Infection and Cardiovascular Disease , 2013, The Scientific World Journal.

[10]  Zeyi Jiang,et al.  Retrospective and prospective analysis of the trends of energy use in Chinese iron and steel industry , 2014 .

[11]  Gavin M. Mudd,et al.  Peak Minerals in Australia: a review of changing impacts and benefits , 2010 .

[12]  Ernst Worrell,et al.  World Best Practice Energy Intensity Values for SelectedIndustrial Sectors , 2007 .

[13]  Samuel Niza,et al.  The material basis of the global economy Worldwide patterns of natural resource extraction and their implications for sustainable resource use policies , 2007 .

[14]  Stefan Pauliuk,et al.  The roles of energy and material efficiency in meeting steel industry CO2 targets. , 2013, Environmental science & technology.

[15]  D. Koca,et al.  On modelling the global copper mining rates, market supply, copper price and the end of copper reserves , 2014 .

[16]  Can Wang,et al.  Scenario analysis on CO2 emissions reduction potential in China's iron and steel industry , 2007 .

[17]  Tao Wang,et al.  Exploring the engine of anthropogenic iron cycles , 2006, Proceedings of the National Academy of Sciences.

[18]  Xiang Yin,et al.  A bottom-up analysis of China’s iron and steel industrial energy consumption and CO2 emissions , 2014 .

[19]  Stefan Pauliuk,et al.  Steel all over the world: Estimating in-use stocks of iron for 200 countries , 2013 .

[20]  Tao Wang,et al.  Moving toward the circular economy: the role of stocks in the Chinese steel cycle. , 2012, Environmental science & technology.

[21]  Roland Clift,et al.  Time-dependent material flow analysis of iron and steel in the UK: Part 2. Scrap generation and recycling , 2007 .

[22]  T. Gutowski,et al.  Material efficiency: A white paper , 2011 .

[23]  Hilary A. Sigman,et al.  The Cost of Reducing Municipal Solid Waste , 1997 .

[24]  Rolf Widmer,et al.  Modeling metal stocks and flows: a review of dynamic material flow analysis methods. , 2014, Environmental science & technology.

[25]  Tak Hur,et al.  Dynamic material flow analysis of steel resources in Korea , 2011 .

[26]  Sami Kara,et al.  Towards Energy and Resource Efficient Manufacturing: A Processes and Systems Approach , 2012 .

[27]  Julian M. Allwood,et al.  Sustainable Materials - With Both Eyes Open , 2012 .

[28]  M. Huijbregts,et al.  Ore grade decrease as life cycle impact indicator for metal scarcity: the case of copper. , 2012, Environmental Science and Technology.

[29]  Peng Wang,et al.  Dynamic Material Flow Analysis of Steel Resources in China Based on Circular Economy Theory , 2013 .

[30]  J. Tilton.  World Metal Demand: Trends and Prospects , 1990 .

[31]  Tengfang Xu,et al.  A bottom-up model to estimate the energy efficiency improvement and CO2 emission reduction potentials in the Chinese iron and steel industry , 2013 .

[32]  E. Arık,et al.  Chinese steel market in the post-futures period , 2014 .

[33]  J. Allwood.  Transitions to material efficiency in the UK steel economy , 2013, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[34]  Zeyi Jiang,et al.  Quantification of Chinese steel cycle flow: Historical status and future options , 2014 .

[35]  Sergey Paltsev,et al.  The MIT Emissions Prediction and Policy Analysis (EPPA) Model: Version 4 , 2005 .

[36]  Gavin M. Mudd,et al.  Modelling future copper ore grade decline based on a detailed assessment of copper resources and mining , 2014 .

[37]  D. Koca,et al.  Investigating the sustainability of the global silver supply, reserves, stocks in society and market price using different approaches , 2014 .

[38]  Patrik Söderholm,et al.  Material efficiency: An economic perspective , 2012 .

[39]  Julian M. Allwood,et al.  The incentives for supply chain collaboration to improve material efficiency in the use of steel: An analysis using input output techniques , 2013 .

[40]  Mohan Yellishetty,et al.  Environmental life-cycle comparisons of steel production and recycling: Sustainability issues, problems and prospects , 2011 .

[41]  Julian M. Allwood,et al.  The steel scrap age. , 2013, Environmental science & technology.

[42]  Florens Flues,et al.  Energy Efficiency and Industrial Output: The Case of the Iron and Steel Industry , 2013 .

[43]  Tao Wang,et al.  Patterns of iron use in societal evolution. , 2011, Environmental science & technology.

[44]  Daniel B. Müller,et al.  The Role of In-Use Stocks in the Social Metabolism and in Climate Change Mitigation , 2013 .

[45]  Ernst Worrell,et al.  Co-benefits of energy efficiency improvement and air pollution abatement in the Chinese iron and steel industry , 2014 .

[46]  Wenqiang Sun,et al.  Advances in Energy Conservation of China Steel Industry , 2013, TheScientificWorldJournal.