Design and Testing of Frequency-Selective Surfaces on Silicon Substrates for Submillimeter-Wave Applications

A new class of frequency-selective surfaces (FSSs), to be used as quasi-optical filters for harmonic suppression in submillimeter-wave frequency multipliers, is proposed and experimentally verified. The FSSs consist of two-dimensional aperture arrays and are made from microstructured aluminum on electrically thick, high-resistivity silicon substrates. This leads to a very good mechanical stability, reasonably low insertion loss, and permits manufacture of the structure by using standard processes available from the semiconductor industries. This paper presents the design, fabrication, and testing of two sets of prototypes, the former with a passband at 300 GHz and a stopband at 450 GHz and the latter with a passband at 600 GHz and a stopband at 750 GHz. For both frequency ranges, FSSs with rectangular slots and with dogbone-shaped holes have been designed by using the method of moments/boundary integral-resonant mode expansion method. The effect of ohmic and dielectric losses has been determined by using the commercial code HFSS. Several prototypes have been fabricated, and measured by terahertz time-domain spectroscopy and continuous wave measurements, showing high reproducibility of the machining process, insertion loss between 1.0 and 1.6 dB, and stopband attenuation larger than 30 dB. Finally, we demonstrate that the incidence angle can be used as a degree of freedom for fine tuning the stopband, without practically changing the frequency response in the passband

[1]  C. Winnewisser,et al.  Design, fabrication, and measurement of frequency-selective surfaces , 2000 .

[2]  C. Winnewisser,et al.  Characterization and application of dichroic filters in the 0.1-3-THz region , 2000 .

[3]  P. Siegel.  Terahertz Technology , 2001 .

[4]  Ben A. Munk,et al.  Frequency Selective Surfaces: Theory and Design , 2000 .

[5]  C. Winnewisser,et al.  Efficient analysis of quasi-optical filters by a hybrid MoM/BI-RME method , 2001 .

[6]  J. A. Reed,et al.  Frequency selective surfaces with multiple periodic elements , 1997 .

[7]  Zoya Popovic,et al.  Active and quasi - optical arrays for solid - state power combining , 1997 .

[8]  R. Marhefka,et al.  Ohmic loss in frequency-selective surfaces , 2003 .

[9]  N. Amitay,et al.  Theory and analysis of phased array antennas , 1972 .

[10]  M. Hoft,et al.  A two-dimensional quasi-optical power combining oscillator array with external injection locking , 2004, IEEE Transactions on Microwave Theory and Techniques.

[11]  James W. Lamb,et al.  Miscellaneous data on materials for millimetre and submillimetre optics , 1996 .

[12]  R. Cahill,et al.  Spatial demultiplexing in the submillimeter wave band using multilayer free-standing frequency selective surfaces , 2005, IEEE Transactions on Antennas and Propagation.

[13]  Hua Chi,et al.  Millimeter wave complex refractive index, complex dielectric permittivity and loss tangent of extra high purity and compensated silicon , 1994 .

[14]  A. Moussessian,et al.  A terahertz grid frequency doubler , 1997, IMS 1997.

[15]  Erich N. Grossman,et al.  Spectral transmittance of lossy printed resonant-grid terahertz bandpass filters , 2000 .

[16]  R. Mittra,et al.  Investigation of millimeter-wave scattering from frequency selective surfaces , 1991 .

[17]  Vincent Fusco,et al.  Micromachined 300 GHz high Q resonant slot frequency selective surface filter , 2004 .

[18]  Maurizio Bozzi,et al.  Deep-space antenna for Rosetta mission: design and testing of the S/X band dichroic mirror , 2003 .