论文信息 - Research Development and Application of Green Cutting Technology

Research Development and Application of Green Cutting Technology

The development of green cutting technology could brought higher finished quality and lower energy consumption. Therefore, the research of green cutting technology has received much attention from researchers. According to constitution of cutting process, green cutting technology is divided into dry cutting technology, trace lubrication cutting technology, low temperature cold wind cutting technology and gas jet cutting technology. The author summarized the typical characteristics of four main cutting technologies and respectively discussed them. Finally, the author has given a detailed demonstration of the application of green cutting technology.

Xiao Jing Li | Yang Liu | Pei Xin Qu

[1] Bo-Sung Shin,et al. Mechanical properties and cutting performance of nanocomposite Cr–Si–N coated tool for green machining , 2009 .

[2] Li Zhang,et al. Study on lubricating characteristic and tool wear with water vapor as coolant and lubricant in green cutting , 2007 .

[3] Guo Yong-ba. Metal Cutting Liquid Pollution and Green Cutting Technology , 2008 .

[4] Junyan Liu,et al. Research on experiments and action mechanism with water vapor as coolant and lubricant in Green cutting , 2005 .

[5] Fei Liu,et al. A decision-making framework model of cutting fluid selection for green manufacturing and a case study , 2002 .