Towards an integrated computational method to determine internal spaces for optimum environmental conditions

Computational Fluid Dynamics tools and Response Surface Methodology optimization techniques were coupled for the evaluation of an optimum window opening design that improves the ventilation efficiency in a naturally-ventilated building. The multi-variable optimization problem was based on Design of Experiments analysis and the Central Composite Design method for the sampling process and estimation of quadratic models for the response variables. The Screening optimization method was used for the generation of the optimal design solution. The generated results indicated a good performance of the estimated response surface revealing the strength correlations between the parameters. Window width was found to have greater impact on the flow rate values with correlation coefficient of 73.62%, in comparison to the standard deviation 55.68%, where the window height prevails with correlation coefficient of 96.94% and 12.35% for the flow rate. The CFD results were validated against wind tunnel experiments and the optimization solution was verified with simulation runs, proving the accuracy of the methodology followed, which is applicable to numerous environmental design problems.

[1]  H. Hotelling.  Experimental Determination of the Maximum of a Function , 1941 .

[2]  Yoshihide Tominaga,et al.  Velocity-pressure field of cross ventilation with open windows analyzed by wind tunnel and numerical simulation , 1992 .

[3]  Zhao Zhang,et al.  Evaluation of Various Turbulence Models in Predicting Airflow and 1 Turbulence in Enclosed Environments by CFD : Part-1 : 2 Summary of Prevalent Turbulence Models 3 4 , 2007 .

[4]  Haralambos Sarimveis,et al.  Optimization of window-openings design for thermal comfort in naturally ventilated buildings , 2012 .

[5]  Jiun-Jih Miau,et al.  Flow visualization, PIV measurement and CFD calculation for fluid-driven natural cross-ventilation in a scale model , 2013 .

[6]  Nyuk Hien Wong,et al.  The study of active stack effect to enhance natural ventilation using wind tunnel and computational fluid dynamics (CFD) simulations , 2004 .

[7]  Jiafang Song,et al.  The Improvement of Ventilation Design in School Buildings Using CFD Simulation , 2015 .

[8]  Ryozo Ooka,et al.  CFD analysis of wind climate from human scale to urban scale , 1999 .

[9]  R. Plackett,et al.  THE DESIGN OF OPTIMUM MULTIFACTORIAL EXPERIMENTS , 1946 .

[10]  Vimal Patel,et al.  Unbalanced Response and Design Optimization of Rotor by ANSYS and Design Of Experiments , 2013 .

[11]  John Kaiser Calautit,et al.  A validated design methodology for a closed-loop subsonic wind tunnel , 2014 .

[12]  Xiong Shen,et al.  Assessments of experimental designs in response surface modelling process: Estimating ventilation rate in naturally ventilated livestock buildings , 2013 .

[13]  Andreas K. Athienitis,et al.  Airflow assessment in cross-ventilated buildings with operable façade elements , 2011 .

[14]  Shugang Wang,et al.  An adjustment to the standard temperature wall function for CFD modeling of indoor convective heat transfer , 2013 .

[15]  John Kaiser Calautit,et al.  Wind tunnel and CFD study of the natural ventilation performance of a commercial multi-directional wind tower , 2014 .

[16]  Zied Driss,et al.  Numerical simulation and wind tunnel experiments on wind-induced natural ventilation in isolated building with patio , 2015 .

[17]  Z. Driss,et al.  Impact of Shape of Obstacle Roof on the Turbulent Flow in a Wind Tunnel , 2014 .

[18]  Jin Cheng,et al.  Application of the response surface methods to solve inverse reliability problems with implicit response functions , 2009 .

[19]  Timothy W. Simpson,et al.  Metamodels for Computer-based Engineering Design: Survey and recommendations , 2001, Engineering with Computers.

[20]  R. H. Myers,et al.  Response Surface Methodology: Process and Product Optimization Using Designed Experiments , 1995 .

[21]  Qingyan Chen,et al.  A Procedure for Verification, Validation, and Reporting of Indoor Environment CFD Analyses , 2002 .

[22]  Miguel Mora-Pérez,et al.  Computational analysis of wind interactions for comparing different buildings sites in terms of natural ventilation , 2015, Adv. Eng. Softw..

[23]  Jelena Srebric,et al.  CFD boundary conditions for contaminant dispersion, heat transfer and airflow simulations around human occupants in indoor environments , 2008 .

[24]  André I. Khuri,et al.  Response surface methodology: 1966–1988 , 1989 .

[25]  Gunjan Verma,et al.  DESIGN OPTIMIZATION OF AN IN-CYLINDER ENGINE INTAKE PORT , 2009 .

[26]  David Banks,et al.  Combined wind tunnel and CFD analysis for indoor airflow prediction of wind-driven cross ventilation , 2013 .

[27]  Bje Bert Blocken,et al.  CFD simulation of cross-ventilation for a generic isolated building : impact of computational parameters , 2012 .

[28]  Xiong Shen,et al.  Investigation of response surface methodology for modelling ventilation rate of a naturally ventilated building , 2012 .

[29]  G. Box,et al.  On the Experimental Attainment of Optimum Conditions , 1951 .

[30]  Graham J. Borradaile,et al.  Statistics of Earth Science Data , 2003 .

[31]  Jörg Franke,et al.  Recommendations of the COST action C14 on the use of CFD in predicting pedestrian wind environment , 2006 .

[32]  Leon R. Glicksman,et al.  Simulation of wind driven ventilative cooling systems for an apartment building in Beijing and Shanghai , 2002 .

[33]  Marcus M. Keane,et al.  Calibrated CFD simulation to evaluate thermal comfort in a highly-glazed naturally ventilated room , 2013 .

[34]  John Kaiser Calautit,et al.  Measurement and prediction of the indoor airflow in a room ventilated with a commercial wind tower , 2014 .

[35]  Siuli Mukhopadhyay,et al.  Response surface methodology , 2010 .

[36]  Edward Ng,et al.  Response surface models for CFD predictions of air diffusion performance index in a displacement ventilated office , 2008 .

[37]  Da-Wen Sun,et al.  Optimising the ventilation configuration of naturally ventilated livestock buildings for improved indoor environmental homogeneity , 2010 .

[38]  John Kaiser Calautit,et al.  A study of passive ventilation integrated with heat recovery , 2014 .

[39]  Chia-Ren Chu,et al.  Wind-driven cross ventilation in long buildings , 2014 .

[40]  Shengwei Wang,et al.  Application of CFD in retrofitting air-conditioning systems in industrial buildings , 2003 .

[41]  Bert Blocken,et al.  50 years of Computational Wind Engineering: Past, present and future , 2014 .