A double laser filtering approach to vibration noise rejection for hot-rolled strip flatness measurement

ABSTRACT This paper proposes a new filtering method based on the Kalman filtering algorithm for hot-rolled strip flatness measurement system. The system involves processing slowly changing signal, which can be considered as a bounded random process, and its model parameters are completely unknown. The noise rejection strategy in double lasers can generate a compensation signal. Since the initial and accumulative error would lead to negative filter effect or even cause divergence, Kalman filter is integrated to effectively deal with the initial error and enhance convergence. In this setting, the noise rejection strategy is used as a prediction model to constitute a similar Kalman filter. The correlated error caused by measurement error is coped with by a compensation model based on the feature of correlated error to enhance the filter effect. Both theoretical analysis and simulations show that the new algorithm has a better filter effect than the traditional Kalman filtering algorithm for the system.

[1]  Eduard Reithmeier,et al.  Image segmentation for laser triangulation based on Chan–Vese model , 2015 .

[2]  Daniel F. García,et al.  Flatness measurement system based on a nonlinear optical triangulation technique , 2002, IEEE Trans. Instrum. Meas..

[3]  Ji-ping Sun,et al.  Laser triangulation measurement of the level in a coal silo , 2011 .

[4]  Jian Chen,et al.  Energy-Efficient Weighted Observation Fusion Kalman Filtering with Randomly Delayed Measurements , 2014, Circuits Syst. Signal Process..

[5]  B. Anderson.  Stability properties of Kalman-Bucy filters , 1971 .

[6]  H. Fang,et al.  L2-stability of Discrete-time Kalman Filter with Random Coefficients under Incorrect Covariance: L2-stability of Discrete-time Kalman Filter with Random Coefficients under Incorrect Covariance , 2014 .

[7]  Yong Zhang,et al.  Study on CCD laser scanning flatness measurement method for hot rolled strip , 2015 .

[8]  Huiqian Wang,et al.  Defect detection in slab surface: a novel dual Charge-coupled Device imaging-based fuzzy connectedness strategy. , 2014, The Review of scientific instruments.

[9]  Yongduan Song,et al.  Approach for designing and developing high-precision integrative systems for strip flatness detection. , 2015, Applied optics.

[10]  Dengfu Chen,et al.  Experimental study on quantitative surface defect depth detection based on laser scanning technology in continuous casting , 2011 .

[11]  Lei Zhang,et al.  A new surface inspection method of TWBS based on active laser-triangulation , 2008, 2008 7th World Congress on Intelligent Control and Automation.

[12]  Bor-Sen Chen,et al.  Robust stability analysis of Kalman-Bucy filter under parametric and noise uncertainties , 1988 .

[13]  H. Fang,et al.  L2-stability of Discrete-time Kalman Filter with Random Coefficients under Incorrect Covariance , 2013 .

[14]  Brian D. Jeffs,et al.  Radar interference blanking in radio astronomy using a Kalman tracker , 2005 .

[15]  Daniel F. García,et al.  Real-time flatness inspection of rolled products based on optical laser triangulation and three-dimensional surface reconstruction , 2010, J. Electronic Imaging.