Performance evaluation of a new tapped-delay-line model for indoor MIMO channels
暂无分享,去创建一个
[1] Andreas F. Molisch,et al. Wireless Communications , 2005 .
[2] Reiner S. Thomä,et al. Comparison of SCM, SCME, and WINNER Channel Models , 2007, 2007 IEEE 65th Vehicular Technology Conference - VTC2007-Spring.
[3] K. Sarabandi,et al. A Hybrid Method for Indoor Wave Propagation Modeling , 2008, IEEE Transactions on Antennas and Propagation.
[4] Tommy Svensson,et al. The road to IMT-advanced communication systems: State-of-the- art and innovation areas addressed by the WINNER + project , 2009, IEEE Communications Magazine.
[5] V. Mohtashami,et al. Effects of inaccuracy of material permittivities on ray tracing results for site- specific indoor propagation modeling , 2013, 2013 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC).
[6] A.K. Sharma,et al. Investigation on Stochastic Tap Delay line model of UWB indoor channel , 2008, 2008 International Conference on Electrical and Computer Engineering.
[7] Jianhua Zhang,et al. Advanced International Communications , 2011, IEEE Vehicular Technology Magazine.
[8] B. T. Maharaj,et al. Ferrimagnetic composites in building material for electromagnetic wave absorption in indoor wireless communication systems , 2010, Proceedings of the Fourth European Conference on Antennas and Propagation.
[9] R. G. Vaughan,et al. On the power delay profile and delay spread for physics-based simulated mobile channel , 2013, 2013 7th European Conference on Antennas and Propagation (EuCAP).
[10] Xiongwen Zhao,et al. Characterization of Doppler spectra for mobile communications at 5.3 GHz , 2003, IEEE Trans. Veh. Technol..
[11] Christopher L. Holloway,et al. A model for predicting the power delay profile characteristics inside a room , 1999 .
[12] Mengquan Yu,et al. Propagation Characteristics, Metrics, and Statistics for Virtual MIMO Performance in a Measured Outdoor Cell , 2011, IEEE Transactions on Antennas and Propagation.