Virtual feed drive system of machine tools development and applications in diagnosis and servo‐tuning

[1]  Burak Sencer,et al.  Optimal high-bandwidth control of ball-screw drives with acceleration and jerk feedback , 2018, Precision Engineering.

[2]  Yusuf Altintas,et al.  Identification of 5-Axis Machine Tools Feed Drive Systems for Contouring Simulation , 2011, Int. J. Autom. Technol..

[3]  Christian Brecher,et al.  Virtual machine tool , 2005 .

[4]  Yusuf Altintas,et al.  Virtual CNC system. Part I. System architecture , 2006 .

[5]  Jing Lin,et al.  Analysis of the transient backlash error in CNC machine tools with closed loops , 2015 .

[6]  Carlos Canudas de Wit,et al.  A survey of models, analysis tools and compensation methods for the control of machines with friction , 1994, Autom..

[7]  Saman K. Halgamuge,et al.  Self-organizing hierarchical particle swarm optimizer with time-varying acceleration coefficients , 2004, IEEE Transactions on Evolutionary Computation.

[8]  Jixiang Yang,et al.  Virtual prediction and constraint of contour errors induced by cutting force disturbances on multi-axis CNC machine tools , 2019, CIRP Annals.

[9]  Shiwei Pi,et al.  5-Axis feed drive modelling and spatial contour error analysis based on dynamics of servo system , 2016, 2016 IEEE International Conference on Mechatronics and Automation.

[10]  Min-Fu Hsieh,et al.  Modeling and control of a feed drive with multiple mechanically coupled ball screws , 2012 .

[11]  Xuemei Ren,et al.  Synchronization and Tracking Control for Dual‐motor Driving Servo Systems with Friction Compensation , 2018 .

[12]  Yusuf Altintas,et al.  High Speed CNC System Design. Part II : Modeling and Identification of Feed Drives , 2001 .

[13]  Yusuf Altintas,et al.  Integration of virtual and on-line machining process control and monitoring , 2017 .

[14]  Ching-Hung Lee,et al.  Remote servo tuning system for multi-axis CNC machine tools using a virtual machine tool approach , 2017 .

[15]  D. Pavelescu,et al.  The friction-speed relation and its influence on the critical velocity of stick-slip motion , 1982 .

[16]  Burak Sencer,et al.  Pre-compensation of servo tracking errors through data-based reference trajectory modification , 2019, CIRP Annals.

[17]  Yusuf Altintas,et al.  Virtual High Performance Machining , 2016 .