Anode‐Free Rechargeable Lithium Metal Batteries

Anode-free rechargeable lithium (Li) batteries (AFLBs) are phenomenal energy storage systems due to their significantly increased energy density and reduced cost relative to Li-ion batteries, as well as ease of assembly because of the absence of an active (reactive) anode material. However, significant challenges, including Li dendrite growth and low cycling Coulombic efficiency (CE), have prevented their practical implementation. Here, an anode-free rechargeable lithium battery based on a Cu||LiFePO4 cell structure with an extremely high CE (>99.8%) is reported for the first time. This results from the utilization of both an exceptionally stable electrolyte and optimized charge/discharge protocols, which minimize the corrosion of the in situly formed Li metal anode.

[1]  B. S. Kwak,et al.  Thin-film rechargeable lithium batteries , 1994 .

[2]  Ji‐Guang Zhang,et al.  Optimized Operating Range for Large-Format LiFePO4/Graphite Batteries , 2014 .

[3]  D. Wilkinson,et al.  Effects of physical constraints on Li cyclability , 1991 .

[4]  Reiner Mönig,et al.  Microscopic observations of the formation, growth and shrinkage of lithium moss during electrodeposition and dissolution , 2014 .

[5]  Jun Liu,et al.  Dendrite-free lithium deposition via self-healing electrostatic shield mechanism. , 2013, Journal of the American Chemical Society.

[6]  Dennis W. Dees,et al.  Morphological Transitions on Lithium Metal Anodes , 2009 .

[7]  Chong Seung Yoon,et al.  Nanostructured high-energy cathode materials for advanced lithium batteries. , 2012, Nature materials.

[8]  O. Borodin,et al.  High rate and stable cycling of lithium metal anode , 2015, Nature Communications.

[9]  M. Stanley Whittingham,et al.  History, Evolution, and Future Status of Energy Storage , 2012, Proceedings of the IEEE.

[10]  C. Delmas,et al.  Lithium deintercalation in LiFePO4 nanoparticles via a domino-cascade model. , 2008, Nature materials.

[11]  N. Dudney,et al.  “Lithium‐Free” Thin‐Film Battery with In Situ Plated Li Anode , 2000 .

[12]  Doron Aurbach,et al.  A short review of failure mechanisms of lithium metal and lithiated graphite anodes in liquid electrolyte solutions , 2002 .

[13]  Nancy J. Dudney,et al.  Fabrication and characterization of amorphous lithium electrolyte thin films and rechargeable thin-film batteries , 1992 .

[14]  Guangyuan Zheng,et al.  Interconnected hollow carbon nanospheres for stable lithium metal anodes. , 2014, Nature nanotechnology.

[15]  Terence J. Lozano,et al.  Failure Mechanism for Fast‐Charged Lithium Metal Batteries with Liquid Electrolytes , 2015 .

[16]  Jiulin Wang,et al.  Novel dual-salts electrolyte solution for dendrite-free lithium-metal based rechargeable batteries with high cycle reversibility , 2014 .

[17]  Samuel S. Cartmell,et al.  Highly Stable Operation of Lithium Metal Batteries Enabled by the Formation of a Transient High‐Concentration Electrolyte Layer , 2016 .

[18]  Ji‐Guang Zhang,et al.  Lithium metal anodes for rechargeable batteries , 2014 .

[19]  Aniruddha Jana,et al.  Dendrite-separator interactions in lithium-based batteries , 2015 .

[20]  M. J. McDonald,et al.  Enhanced ionic conductivity of Li3.5Si0.5P0.5O4 with addition of lithium borate , 2015 .

[21]  John B Goodenough,et al.  The Li-ion rechargeable battery: a perspective. , 2013, Journal of the American Chemical Society.

[22]  K. Amine,et al.  Symmetrical Impedance Study on Inactivation Induced Degradation of Lithium Electrodes for Batteries Beyond Lithium-Ion , 2014 .

[23]  Lynden A Archer,et al.  Stable lithium electrodeposition in liquid and nanoporous solid electrolytes. , 2014, Nature materials.