Data mining and machine learning approaches on engineering materials — A review

This review paper explores the attempts made by the numerous authors in the field of material selection. There are ample amounts of works were carried out in the field of materials engineering with data mining approaches. From the literature it is revealed that not much of the work is explored on the classification of advanced composite materials using machine learning approaches.

[1]  Krishna Rajan,et al.  Combinatorial Materials Sciences: Experimental Strategies for Accelerated Knowledge Discovery , 2008 .

[2]  Karen Margaret Holford,et al.  Damage classification in carbon fibre composites using acoustic emission: A comparison of three techniques , 2015 .

[3]  Tim Mueller,et al.  Machine Learning in Materials Science , 2016 .

[4]  T M Cornsweet,et al.  Advanced composite materials. , 1970, Science.

[5]  David Cebon,et al.  Materials Selection in Mechanical Design , 1992 .

[6]  J. Paulo Davim,et al.  Artificial neural network based on genetic learning for machining of polyetheretherketone composite materials , 2008 .

[7]  Sanguthevar Rajasekaran,et al.  Accelerating materials property predictions using machine learning , 2013, Scientific Reports.

[8]  Elizabeth A. Holm,et al.  A computer vision approach for automated analysis and classification of microstructural image data , 2015 .

[9]  Mario Fritz,et al.  Classifying materials in the real world , 2010, Image Vis. Comput..

[10]  O. Abuomar,et al.  Mechanical Property Classification of Vapor-Grown Carbon Nanofiber / Vinyl Ester Nanocomposites Using Support Vector Machines , 2022 .

[11]  Raphaël Marée,et al.  A machine learning approach for material detection in hyperspectral images , 2009, 2009 IEEE Computer Society Conference on Computer Vision and Pattern Recognition Workshops.

[12]  R. Ramprasad,et al.  Machine Learning in Materials Science , 2016 .

[13]  Thomas E. Lacy,et al.  Comprehensive mechanical property classification of vapor-grown carbon nanofiber/vinyl ester nanocomposites using support vector machines , 2015 .

[14]  J AntonyP,et al.  Computational linguistic tools and machine translation system for Kannada language , 2013 .

[15]  Doreswamy,et al.  Performance Evaluation of Predictive Classifiers For Knowledge Discovery From Engineering Materials Data Sets , 2012, ArXiv.

[16]  Roger L. King,et al.  Data mining and knowledge discovery in materials science and engineering: A polymer nanocomposites case study , 2013, Adv. Eng. Informatics.

[17]  Ajay Batish,et al.  A hybrid Taguchi-artificial neural network approach to predict surface roughness during electric discharge machining of titanium alloys , 2014 .

[18]  Noureddine Zerhouni,et al.  An Unsupervised Pattern Recognition Approach for AE Data Originating from Fatigue Tests on Polymer-Composite Materials , 2014 .

[20]  Kaushik Pal,et al.  Prediction of mechanical properties of polypropylene/waste ground rubber tire powder treated by bitumen composites via uniform design and artificial neural networks , 2010 .

[21]  F. C. Campbell.  Structural Composite Materials , 2010 .

[22]  Helena Pereira,et al.  Prediction of mechanical strength of cork under compression using machine learning techniques , 2015 .

[23]  Mahmoud Z. Iskandarani,et al.  Application of Neural Networks to Matlab Analyzed Hyperspectral Images for Characterization of Composite Structures , 2013 .

[24]  C. C. Nwobi-Okoye,et al.  Predicting the mechanical properties of date palm wood fibre-recycled low density polyethylene composite using artificial neural network , 2014, International Journal of Mechanical and Materials Engineering.

[25]  Doreswamy,et al.  Similarity Measuring Approach for Engineering Materials Selection , 2010 .

[26]  Journal Ijmer,et al.  “Design and Analysis of Composite Drive Shaft using ANSYS and Genetic Algorithm” A Critical Review , 2014 .

[27]  Tiziana D'Orazio,et al.  Identification of Defective Areas in Composite Materials by Bivariate EMD Analysis of Ultrasound , 2012, IEEE Transactions on Instrumentation and Measurement.

[28]  Alok Choudhary,et al.  A predictive machine learning approach for microstructure optimization and materials design , 2015, Scientific Reports.

[29]  A.N. Srivastava,et al.  Classification of Damage Signatures in Composite Plates using One-Class SVMs , 2007, 2007 IEEE Aerospace Conference.

[30]  J. A. Mayugo,et al.  A comparative study of genetic algorithms for the multi-objective optimization of composite stringers under compression loads , 2013 .

[31]  James F. Shackelford,et al.  Materials Processing Handbook , 2016 .

[32]  David Cebon,et al.  Computer aided materials selection for mechanical design , 1992 .

[33]  Taiwo Oladipupo Ayodele,et al.  Types of Machine Learning Algorithms , 2010 .

[34]  Jia-li Tang,et al.  Prediction of Material Mechanical Properties with Support Vector Machine , 2010, 2010 International Conference on Machine Vision and Human-machine Interface.

[35]  Pedro M. Domingos.  A few useful things to know about machine learning , 2012, Commun. ACM.

[36]  Doreswamy.  Knowledge Discovery System For Cost-Effective Composite Polymer Selection-Data Mining Approach , 2005 .

[37]  Krishna Rajan,et al.  Invited review: Data mining and informatics for crystal chemistry: establishing measurement techniques for mapping structure–property relationships , 2009 .

[38]  Edward H. Adelson,et al.  Exploring features in a Bayesian framework for material recognition , 2010, 2010 IEEE Computer Society Conference on Computer Vision and Pattern Recognition.

[39]  Nicholas Zabaras,et al.  Classification and reconstruction of three-dimensional microstructures using support vector machines , 2005 .

[40]  Johannes R. Sveinsson,et al.  Spectral and spatial classification of hyperspectral data using SVMs and morphological profiles , 2008, 2007 IEEE International Geoscience and Remote Sensing Symposium.

[41]  Zhi-Feng Zhong,et al.  Design and implementation of insulators material hydrophobicity measure system by support vector machine decision tree learning , 2005, 2005 International Conference on Machine Learning and Cybernetics.

[42]  Krishan K. Chawla,et al.  Composite Materials: Science and Engineering , 1987 .

[43]  Ankit Agrawal,et al.  Machine learning approaches for elastic localization linkages in high-contrast composite materials , 2015, Integrating Materials and Manufacturing Innovation.

[44]  Mustafa Taskin Uğur Caligulu Halil Dikbas.  ARTIFICIAL NEURAL NETWORK (ANN) APPROACH TO PREDICTION OF DIFFUSION BONDING BEHAVIOR (SHEAR STRENGTH) OF SiCP REINFORCED ALUMINUM METAL MATRIX COMPOSITES , 2008 .

[45]  Dong-Woo Lee,et al.  A study on fatigue damage modeling using neural networks , 2005 .

[46]  Mohamed Othman,et al.  A NAÏVE-BAYES CLASSIFIER AND f-FOLDS FEATURE EXTRACTION MEHTOD FOR MATERIALS DAMAGE DETECTION , 2007 .

[47]  Cynthia Rudin,et al.  Machine Learning Algorithms for Classification , 2007 .

[48]  L. Pagnotta,et al.  On the determination of mechanical properties of composite laminates using genetic algorithms , 2004 .

[49]  N. Altinkok.  Use of Artificial Neural Network for Prediction of Mechanical Properties of α-Al2O3 Particulate-reinforced Al–Si10Mg Alloy Composites Prepared by using Stir Casting Process , 2006 .