Exergy as a tool for measuring process intensification in chemical engineering

Exergy is defined as the maximum shaft work that can be done in a process to bring the system into equilibrium with the environment. Thus, exergy analyses are the first step to understand where the weak points of processes are. It considers intrinsically the quality of energy: when energy loses its quality, exergy is destroyed. In addition, optimization of processes aiming at the minimization of exergy destruction can be done as a function of the topology and physical characteristics of the system, such as finite dimensions, shapes, materials, finite speeds, and finite-time intervals of operation, establishing a direct relationship between exergy and process intensification. However, the emphasis on exergy in chemical engineering is still very poor compared with other fields, in spite of being one of the areas in which more exergy is destroyed due to reaction and separation. This paper gives an overview of the current application of exergy analyses in chemical engineering, showing the main fields in which exergy studies are performed and focusing the attention on two critical points of action: separation technologies (distillation and membrane technology) and CO2 capture. New research trends in chemical engineering using exergy as a tool for process intensification are highlighted. © 2013 Society of Chemical Industry.

[1]  Noam Lior,et al.  Sources of Combustion Irreversibility , 1994 .

[2]  E. Drioli,et al.  Potential of membrane distillation in seawater desalination: Thermal efficiency, sensitivity study and cost estimation , 2008 .

[3]  Enrico Drioli,et al.  Energetic and exergetic analysis of an integrated membrane desalination system , 1999 .

[4]  Tom Van Gerven,et al.  RECENT DEVELOPMENTS IN MEMBRANE-BASED TECHNOLOGIES FOR CO2 CAPTURE , 2012 .

[5]  A. Bejan.  Fundamentals of exergy analysis, entropy generation minimization, and the generation of flow architecture , 2002 .

[6]  Andrea Ramírez,et al.  Comparative assessment of CO2 capture technologies for carbon-intensive industrial processes , 2012 .

[7]  Enrico Drioli,et al.  Integrating Membrane Contactors Technology and Pressure-Driven Membrane Operations for Seawater Desalination: Energy, Exergy and Costs Analysis , 2006 .

[8]  Ricardo Rivero,et al.  Exergy analysis of distillation processes , 1996 .

[9]  Yasuki Kansha,et al.  Exergy Recuperative CO2 Gas Separation in Post-Combustion Capture , 2011 .

[10]  Tatiana Morosuk,et al.  Exergoeconomic and exergoenvironmental evaluation of power plants including CO2 capture , 2011 .

[11]  Costas Tsouris,et al.  Separation of CO2 from Flue Gas: A Review , 2005 .

[12]  N. Lior,et al.  The theory and practice of energy saving in the chemical industry: some methods for reducing thermodynamic irreversibility in chemical technology processes , 2003 .

[13]  I. Dincer,et al.  Energy, environment and sustainable development , 1999 .

[14]  H. J. Van Der Kooi,et al.  Exergy analysis with a flowsheeting simulator-II. Application; synthesis gas production from natural gas , 1996 .

[15]  Stijn Bruers,et al.  Exergy: its potential and limitations in environmental science and technology. , 2008, Environmental science & technology.

[16]  Ricardo Rivero,et al.  Exergy and exergoeconomic analysis of a crude oil combined distillation unit , 2004 .

[17]  Rakesh Agrawal,et al.  Gas separation membrane cascades I. One-compressor cascades with minimal exergy losses due to mixing , 1996 .

[18]  Ibrahim Dincer,et al.  Application of oxygen ion-conductive membranes for simultaneous electricity and hydrogen generation , 2006 .

[19]  Enrico Drioli,et al.  An exergetic analysis of a membrane desalination system , 2010 .

[20]  Mikhail Sorin,et al.  Thermodynamically guided intensification of separation processes , 2007 .

[21]  Antonio G. Ramos,et al.  Novel application for exergy and thermoeconomic analysis of processes simulated with Aspen Plus , 2011 .

[22]  Enrico Drioli,et al.  Methodology for estimating saving of primary energy with membrane operations in industrial processes , 1995 .

[23]  Yunus Cerci,et al.  Exergy analysis of a reverse osmosis desalination plant in California , 2002 .

[24]  Vincenza Calabrò,et al.  Experimental study on integrated membrane processes in the treatment of solutions simulating textile effluents. Energy and exergy analysis , 1990 .

[25]  Farzad Abdollahi-Demneh,et al.  Calculating exergy in flowsheeting simulators: A HYSYS implementation , 2011 .

[26]  Enrico Drioli,et al.  Progress and New Perspectives on Integrated Membrane Operations for Sustainable Industrial Growth , 2001 .

[27]  Olav Bolland,et al.  Optimized process configurations of post-combustion CO2 capture for natural-gas-fired power plant—Exergy analysis , 2011 .

[28]  David W. Keith,et al.  Low-energy sodium hydroxide recovery for CO2 capture from atmospheric air—Thermodynamic analysis , 2009 .

[29]  Soteris A. Kalogirou,et al.  Seawater desalination using renewable energy sources , 2005 .

[30]  H. Mehdizadeh,et al.  Membrane desalination plants from an energy–exergy viewpoint , 2006 .

[31]  David W. Agar,et al.  Intensification of low temperature thermomorphic biphasic amine solvent regeneration for CO2 capture , 2012 .

[32]  A. Bejan.  Entropy generation minimization: The new thermodynamics of finite-size devices and finite-time processes , 1996 .

[33]  Yaşar Demirel,et al.  Thermodynamic Analysis of Separation Systems , 2004 .

[34]  Gary T. Rochelle,et al.  Aqueous piperazine as the new standard for CO2 capture technology , 2011 .

[35]  Carlo Vandecasteele,et al.  Reuse, treatment, and discharge of the concentrate of pressure-driven membrane processes. , 2003, Environmental science & technology.

[36]  P. Feron,et al.  Exergy analysis of alkanolamine-based CO2 removal unit with AspenPlus , 2004 .

[37]  Rakesh Agrawal,et al.  Gas separation membrane cascades II. Two-compressor cascades , 1996 .

[38]  D. Zheng,et al.  Evaluation of a chemical-looping-combustion power-generation system by graphic exergy analysis , 1987 .

[39]  A. Doukelis,et al.  Exergy analysis of a hydrogen fired combined cycle with natural gas reforming and membrane assisted shift reactors for CO2 capture , 2012 .

[40]  Olivier Baudouin,et al.  General methodology for exergy balance in ProSimPlus® process simulator , 2012 .

[41]  Amir Hossein Tarighaleslami,et al.  Thermodynamic evaluation of distillation columns using exergy loss profiles: a case study on the crude oil atmospheric distillation column , 2012, Clean Technologies and Environmental Policy.

[42]  Peter Mizsey,et al.  Methodology for the design and evaluation of distillation systems: Exergy analysis, economic features and GHG emissions , 2009 .

[43]  Yasuki Kansha,et al.  Exergy recuperative CO2 gas separation in pre-combustion capture , 2011, Clean Technologies and Environmental Policy.

[44]  R. Zevenhoven,et al.  Energy efficiency analysis of CO2 mineral sequestration in magnesium silicate rock using electrochemical steps , 2012 .

[45]  G. D. Koeijer,et al.  Entropy production and exergy loss in experimental distillation columns , 2003 .

[46]  R. Baker.  Future directions of membrane gas separation technology , 2002 .

[47]  Patricia Luis Alconero,et al.  Technical viability and exergy analysis of membrane crystallization: Closing the loop of CO2 sequestration , 2013 .

[48]  Hassan E.S. Fath,et al.  Thermoeconomic analysis of some existing desalination processes , 2007 .

[49]  H. Kooi,et al.  Exergy analysis with a flowsheeting simulator—I. Theory; calculating exergies of material streams , 1996 .

[50]  Y. El-Sayed,et al.  The energetics of desalination processes , 2001 .

[51]  Arnold Janssens,et al.  An improved calculation of the exergy of natural resources for exergetic life cycle assessment (ELCA). , 2006, Environmental science & technology.

[52]  Ignacio E. Grossmann,et al.  Optimal design of complex distillation system for multicomponent zeotropic separations , 2012 .