An analysis of wind energy potential for micro wind turbine in Hong Kong

Renewable energy can play an important role in meeting the ultimate goal of replacing parts of fossil fuels to generate sustainable, inexhaustible, clean and safe energy. One of the promising applications of renewable energy technology is the installation of wind turbine that has been identified as having potential for wide-scale application in Hong Kong. Locally, wind turbines are seldom installed in building developments. The barriers include limited installation space available, the heavily obstructed external environments and noise and vibration problems. The apposite places for the installation would be on the roof/rooftop of low-rise buildings located in low-density zones. Relevant wind data and output power generated on-site, which may be quite site-dependent, are essential for modelling and evaluating the wind energy conversion system. Long-term measured wind data are crucial to the study of wind energy potential. This work studies the wind data and micro-wind turbine used in dense urban terrain and low-density area. Technical data including wind speed and output power were analyzed and reported. To achieve 1% of total building energy consumption generated from wind power, 17 micro-wind turbines are required to be installed in this institutional building located in low-density zone. Practical application: Wind turbine is one of the typical applications of renewable energy technology. However, micro-turbines are not popularly installed in building developments. This work analyses the measured wind data and the energy performance of micro-wind turbines installed in an institutional building. The findings provide the on-site measured data for design and assessment of micro-wind turbines installed in building blocks.

[1]  Zhanfeng Song,et al.  Assessing transient response of DFIG based wind turbines during voltage dips regarding main flux saturation and rotor deep-bar effect , 2010 .

[2]  Mohsen Kalantar,et al.  Dynamic behavior of a stand-alone hybrid power generation system of wind turbine, microturbine, solar array and battery storage , 2010 .

[3]  Tariq Muneer,et al.  Evaluation of micro-wind turbine aerodynamics, wind speed sampling interval and its spatial variation , 2009 .

[4]  Muyiwa S. Adaramola,et al.  Wind energy evaluation for electricity generation using WECS in seven selected locations in Nigeria , 2011 .

[5]  Shafiqur Rehman,et al.  Wind energy resources assessment for Yanbo, Saudi Arabia , 2004 .

[6]  J. C. Lam,et al.  A study of Weibull parameters using long-term wind observations , 2000 .

[7]  Grzegorz Wisniewski,et al.  The role of renewable energy in carbon dioxide emission reduction in Poland , 1995 .

[8]  Mustafa Serdar Genç,et al.  Evaluation of electricity generation and energy cost of wind energy conversion systems (WECSs) in Central Turkey , 2009 .

[9]  Leonardo Bergami,et al.  Analysis of the furling behavior of small wind turbines , 2010 .

[10]  A Glass,et al.  Micro wind turbine performance under real weather conditions in urban environment , 2011 .

[11]  Danny H.W. Li,et al.  An Analysis of Climatic Variables and Design Implications , 1999 .

[12]  Patrick James,et al.  Urban energy generation: Influence of micro-wind turbine output on electricity consumption in buildings , 2007 .

[13]  D. Weisser,et al.  A wind energy analysis of Grenada: an estimation using the 'Weibull' density function , 2003 .

[14]  K.M. Leung,et al.  Renewable energy development in Hong Kong , 2004, 2004 IEEE International Conference on Electric Utility Deregulation, Restructuring and Power Technologies. Proceedings.

[15]  Lin Lu,et al.  Investigation on wind power potential on Hong Kong islands—an analysis of wind power and wind turbine characteristics , 2002 .

[16]  Danny H.W. Li,et al.  A study of grid-connected photovoltaic (PV) system in Hong Kong , 2012 .

[17]  E. Hrayshat.  Wind resource assessment of the Jordanian southern region , 2007 .