Thin TiOx layer as a voltage divider layer located at the quasi-Ohmic junction in the Pt/Ta2O5/Ta resistance switching memory.

Ta2O5 has been an appealing contender for the resistance switching random access memory (ReRAM). The resistance switching (RS) in this material is induced by the repeated formation and rupture of the conducting filaments (CFs) in the oxide layer, which are accompanied by the almost inevitable randomness of the switching parameters. In this work, a 1 to 2 nm-thick Ti layer was deposited on the 10 nm-thick Ta2O5 RS layer, which greatly improved the RS performances, including the much-improved switching uniformity. The Ti metal layer was naturally oxidized to TiOx (x < 2) and played the role of a series resistor, whose resistance value was comparable to the on-state resistance of the Ta2O5 RS layer. The series resistor TiOx efficiently suppressed the adverse effects of the voltage (or current) overshooting at the moment of switching by the appropriate voltage partake effect, which increased the controllability of the CF formation and rupture. The switching cycle endurance was increased by two orders of magnitude even during the severe current-voltage sweep tests compared with the samples without the thin TiOx layer. The Ti deposition did not induce any significant overhead to the fabrication process, making the process highly promising for the mass production of a reliable ReRAM.

[1]  Kinam Kim,et al.  A fast, high-endurance and scalable non-volatile memory device made from asymmetric Ta2O(5-x)/TaO(2-x) bilayer structures. , 2011, Nature materials.

[2]  S. Long,et al.  Nonvolatile resistive switching memory utilizing gold nanocrystals embedded in zirconium oxide , 2007 .

[3]  Byung Joon Choi,et al.  Anode-interface localized filamentary mechanism in resistive switching of TiO2 thin films , 2007 .

[4]  Kinam Kim,et al.  In situ observation of filamentary conducting channels in an asymmetric Ta2O5−x/TaO2−x bilayer structure , 2013, Nature Communications.

[5]  Tae Hyung Park,et al.  Thickness effect of ultra-thin Ta2O5 resistance switching layer in 28 nm-diameter memory cell , 2015, Scientific Reports.

[6]  Jae Hyuck Jang,et al.  Atomic structure of conducting nanofilaments in TiO2 resistive switching memory. , 2010, Nature nanotechnology.

[7]  J. Yang,et al.  Anatomy of a Nanoscale Conduction Channel Reveals the Mechanism of a High‐Performance Memristor , 2011, Advanced materials.

[8]  R. Dittmann,et al.  Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges , 2009, Advanced materials.

[9]  Jun Yeong Seok,et al.  Highly Uniform, Electroforming‐Free, and Self‐Rectifying Resistive Memory in the Pt/Ta2O5/HfO2‐x/TiN Structure , 2014 .

[10]  Cheol Seong Hwang,et al.  Highly Improved Uniformity in the Resistive Switching Parameters of TiO2 Thin Films by Inserting Ru Nanodots , 2013, Advanced materials.

[11]  Byungnam Kahng,et al.  Conversion from unipolar to bipolar resistance switching by inserting Ta2O5 layer in Pt/TaOx/Pt cells , 2011 .

[12]  Emmanuelle M. Grafals,et al.  Voltage divider effect for the improvement of variability and endurance of TaOx memristor , 2016, Scientific Reports.

[13]  Jong-Ho Lee,et al.  32 × 32 Crossbar Array Resistive Memory Composed of a Stacked Schottky Diode and Unipolar Resistive Memory , 2013 .

[14]  Lifeng Liu,et al.  Gd-doping effect on performance of HfO2 based resistive switching memory devices using implantation approach , 2011 .

[15]  Ru Huang,et al.  Novel Vertical 3D Structure of TaOx-based RRAM with Self-localized Switching Region by Sidewall Electrode Oxidation , 2016, Scientific Reports.

[16]  Young Jae Kwon,et al.  Pt/Ta2O5/HfO2−x/Ti Resistive Switching Memory Competing with Multilevel NAND Flash , 2015, Advanced materials.

[17]  Seung Ryul Lee,et al.  Self‐Limited Switching in Ta2O5/TaOx Memristors Exhibiting Uniform Multilevel Changes in Resistance , 2015 .

[18]  S. Menzel,et al.  Impact of oxygen exchange reaction at the ohmic interface in Ta2O5-based ReRAM devices. , 2016, Nanoscale.

[19]  Jun Yeong Seok,et al.  Influence of the Interconnection Line Resistance and Performance of a Resistive Cross Bar Array Memory , 2010 .

[20]  R. Stanley Williams,et al.  Low Variability Resistor–Memristor Circuit Masking the Actual Memristor States , 2015 .

[21]  Chang Jung Kim,et al.  Physical electro-thermal model of resistive switching in bi-layered resistance-change memory , 2013, Scientific Reports.

[22]  F. Pettit,et al.  Introduction to the high-temperature oxidation of metals , 2006 .

[23]  Cheol Seong Hwang,et al.  Identification of the controlling parameter for the set-state resistance of a TiO2 resistive switching cell , 2010 .

[24]  Yu-ran Luo,et al.  Comprehensive handbook of chemical bond energies , 2007 .