Assessment of metal mobility in dredged harbour sediments from Barcelona, Spain.

In order to assess heavy metal mobility in dredged harbour sediments, six superficial sediment samples covering a range of pollution levels and environments were collected in Barcelona Harbour. Samples were characterised in terms of major compounds (Al, Ca, Fe, Mn, Si, Ti, Mg, K and Na); total C, N and S contents; organic matter; and water content. Pseudo-total trace metal contents were assessed after aqua regia digestion (ISO 11466:1995). The modified BCR three-step sequential extraction procedure (BCR-SEP) was applied, and both major compounds (Al, Ca, Fe and Mn) and trace metals (Cd, Cr, Cu, Ni, Pb and Zn) were determined in the different extracts. Both the pseudo-total digestion method and the BCR-SEP were validated using two sediment certified materials from lakes (BCR CRM 701 and BCR CRM 601). The highest metal concentrations were observed in one of the sampling points which receives an urban discharge. The observed mobility order (percentage of metal extracted in the first step) of the six trace metals studied was Cd>Zn>Pb>Cu>Ni>Cr. The good agreement observed with the results obtained as the sum of the four steps (extractable+residue) and the pseudo-total content shows that laboratory working conditions were under control.

[1]  F. Onorati,et al.  Characterisation of harbour and coastal sediments: specific destinations of dredged material , 1999 .

[2]  V Karius,et al.  PH and grain-size variation in leaching tests with bricks made of harbour sediments compared to commercial bricks. , 2001, The Science of the total environment.

[3]  Angels Sahuquillo,et al.  Determination of Cd, Cu, Pb and Zn in environmental samples: microwave-assisted total digestion versus aqua regia and nitric acid extraction , 2002 .

[4]  Angels Sahuquillo,et al.  Use of a certified reference material for extractable trace metals to assess sources of uncertainty in the BCR three-stage sequential extraction procedure , 1999 .

[5]  Comparative assessment of two sequential chemical extraction schemes for the fractionation of cadmium, chromium, lead and zinc in surface coastal sediments , 2001, Fresenius' journal of analytical chemistry.

[6]  Kay Hamer,et al.  Brick production with dredged harbour sediments. An industrial-scale experiment. , 2002, Waste management.

[7]  B. Pihlar,et al.  Partitioning of Zn, Pb and Cd in river sediments from a lead and zinc mining area using the BCR three-step sequential extraction procedure. , 2001, Journal of environmental monitoring : JEM.

[8]  M. Hodson,et al.  Changes in the leachability of metals from dredged canal sediments during drying and oxidation. , 2001, Environmental pollution.

[9]  J C Jiménez Sánchez,et al.  Heavy metal extractable forms in sludge from wastewater treatment plants. , 2002, Chemosphere.

[10]  C. Davidson,et al.  Comparison of original and modified BCR sequential extraction procedures for the fractionation of copper, iron, lead, manganese and zinc in soils and sediments , 2003 .

[11]  M. Schintu,et al.  Sedimentary records of heavy metals in the industrial harbour of Portovesme, Sardinia (Italy) , 1999 .

[12]  D. Loring,et al.  Manual for the geochemical analyses of marine sediments and suspended particulate matter , 1992 .

[13]  I. Giráldez,et al.  Comparison of the feasibility of three extraction procedures for trace metal partitioning in sediments from south-west Spain. , 2000, The Science of the total environment.

[14]  J. Stronkhorst,et al.  Toxicity of harbour canal sediments before dredging and after off shore disposal , 1997 .