Optimal design of an industrial scale dual-type reactor for direct dimethyl ether (DME) production from syngas

Abstract Since in foreseeable future DME as a clean-burning fuel with versatile applications will play a significant role in the transportation sector, the least improvement in its production process which can increase the production capacity is economically favorable. In this study, an industrial dual-type reactor is designed and optimized by DE algorithm for increasing DME production and also overcoming the reaction equilibrium limitations of the direct DME synthesis. The proposed reactor configuration is composed of two fixed bed reactors: (1) the water-cooled reactor and (2) the gas-cooled reactor. The syngas feed is preheated with the hot exit product from the first reactor (water-cooled), and is entered into the first reactor. The reactors are simulated by means of a one-dimensional steady-state heterogeneous model. The simulation results indicate that the best flow pattern for the proposed configuration is the counter-current mode. Maximizing the outlet mole fraction of DME from the second reactor is the objective of the optimizer. Seven operating and geometrical parameters of the system are considered as the decision variables. The results show that the proposed configuration can enhance DME production capacity about 60 ton/day in comparison to conventional industrial DME reactor which operates based on the indirect DME synthesis process.

[1]  Spencer C. Sorenson,et al.  Dimethyl Ether in Diesel Engines: Progress and Perspectives , 2001 .

[2]  R. Borup,et al.  Dimethyl ether (DME) as an alternative fuel , 2006 .

[3]  Mohammad Reza Rahimpour,et al.  A comparison of co-current and counter-current modes of operation for a dual-type industrial methanol reactor , 2008 .

[4]  Reza Eslamloueyan,et al.  Direct dimethyl ether (DME) synthesis through a thermally coupled heat exchanger reactor , 2011 .

[5]  Mathematical Simulation and Design of Three-Phase Bubble Column Reactor for Direct Synthesis of Dimethyl Ether from Syngas , 2007 .

[6]  Wen-De Xiao,et al.  Theoretical Analysis of Fluidized-Bed Reactor for Dimethyl Ether Synthesis from Syngas , 2003 .

[7]  T. Fukunaga,et al.  The influence of metals and acidic oxide species on the steam reforming of dimethyl ether (DME) , 2008 .

[8]  J. M. Smith.  Chemical Engineering Kinetics , 1980 .

[9]  D. Fang,et al.  Simulation and model design of pipe-shell reactor for the direct synthesis of dimethyl ether from syngas , 2008 .

[10]  B. V. Babu,et al.  Differential evolution strategies for optimal design of shell-and-tube heat exchangers , 2007 .

[11]  Behdad Moghtaderi,et al.  A comparison of homogeneous and heterogeneous dynamic models for industrial methanol reactors in the presence of catalyst deactivation , 2005 .

[12]  B. V. Babu,et al.  Optimal design of an auto-thermal ammonia synthesis reactor , 2005, Comput. Chem. Eng..

[13]  Shuben Li,et al.  Bifunctional catalysts for conversion of synthesis gas to dimethyl ether , 1998 .

[14]  M. Rahimpour.  A DUAL-CATALYST BED CONCEPT FOR INDUSTRIAL METHANOL SYNTHESIS , 2007 .

[15]  Rainer Storn,et al.  Differential Evolution – A Simple and Efficient Heuristic for global Optimization over Continuous Spaces , 1997, J. Glob. Optim..

[16]  Weiyong Ying,et al.  Intrinsic Kinetics of Dimethyl Ether Synthesis from Syngas , 2005 .

[17]  D. Chadwick,et al.  Kinetics and modelling of dimethyl ether synthesis from synthesis gas , 1999 .

[18]  D. Himmelblau,et al.  Optimization of Chemical Processes , 1987 .

[19]  F. Larachi,et al.  Dimethyl Ether Synthesis with in situ H2O Removal in Fixed-Bed Membrane Reactor: Model and Simulations† , 2010 .

[20]  Aacm Beenackers,et al.  Intra-particle diffusion limitations in low-pressure methanol synthesis , 1990 .

[21]  G. Moradi,et al.  Effect of the hybrid catalysts preparation method upon direct synthesis of dimethyl ether from synthesis gas , 2007 .

[22]  Reza Eslamloueyan,et al.  Modeling, simulation and control of dimethyl ether synthesis in an industrial fixed-bed reactor , 2011 .

[23]  Peter Harriott,et al.  Unit Operations of Chemical Engineering , 2004 .

[24]  Bing Zhong,et al.  Modification of Cu-based methanol synthesis catalyst for dimethyl ether synthesis from syngas in slurry phase , 2005 .