Mechanics of materials and structures: a simulation-driven design approach

Engineering product development has developed considerably over the past decade. In order for industry to keep up with continuously changing requirements, it is necessary to develop new and innovat ...

[1]  Lars-Erik Lindgren,et al.  FINITE ELEMENT MODELING AND SIMULATION OF WELDING PART 1: INCREASED COMPLEXITY , 2001 .

[2]  Dara W. Childs.  Fractional-frequency rotor motion due to nonsymmetric clearance effects , 1982 .

[3]  Dara W. Childs,et al.  Turbomachinery Rotordynamics: Phenomena, Modeling, and Analysis , 1993 .

[4]  Andy J. Keane,et al.  Weld sequence optimization: The use of surrogate models for solving sequential combinatorial problems , 2005 .

[5]  Yukio Ueda,et al.  New Measuring Method of Axisymmetric Three-Dimensional Residual Stresses Using Inherent Strains as Parameters , 1986 .

[6]  Andrew Cook,et al.  Revolutionizing Product Development‐Quantum Leaps in Speed, Eficiency, and Quality , 1994 .

[7]  Shoichi Kiyoshima,et al.  Prediction of residual stresses in a dissimilar metal welded pipe with considering cladding, buttering and post weld heat treatment , 2009 .

[8]  Fulei Chu,et al.  Periodic, quasi-periodic and chaotic vibrations of a rub-impact rotor system supported on oil film bearings , 1997 .

[9]  Lennart Karlsson,et al.  Dynamics of rotor systems with clearance and weak pedestals in full contact , 2010 .

[10]  T. A. Harris,et al.  Rolling Bearing Analysis , 1967 .

[11]  Mats Näsström,et al.  Experimental and Numerical Study of Multi-Pass Welding Process of Pipe-Flange Joints , 1998 .

[12]  Peter Åström,et al.  Simulation of Manufacturing Processes in Product Development , 2004 .

[13]  B. Andersson,et al.  Thermal Stresses in a Submerged-Arc Welded Joint Considering Phase Transformations , 1978 .

[14]  Karl T. Ulrich,et al.  Product Design and Development , 1995 .

[15]  A. Służalec,et al.  Thermal Stresses in Welding , 2005 .

[16]  Magnus Karlberg.  Approximated Stiffness Coefficients in Rotor Systems Supported by Bearings with Clearance , 2010 .

[17]  Magnus Karlberg,et al.  Investigation of an unbalanced rotor system with bearing clearance and stabilising rods , 2004 .

[18]  Donald E. LaCourse.  Handbook of solid modeling , 1995 .

[19]  Yousef Saad,et al.  Iterative methods for sparse linear systems , 2003 .

[20]  K.-H. Chang,et al.  Comparative study of welding residual stresses in carbon and stainless steel butt welds , 2008 .

[21]  Michael Smith,et al.  NeT bead on plate round robin: Comparison of residual stress predictions and measurements , 2009 .

[22]  Yukio Ueda,et al.  A Predicting Method of Welding Residual Stress Using Source of Residual Stress (Report III) : Prediction of Residual Stresses in T- and I-joints Using Inherent Strains(Mechanics, Strength & Structural Design) , 1993 .

[23]  A. Barroso,et al.  Prediction of welding residual stresses and displacements by simplified models. Experimental validation , 2010 .

[24]  Andreas Pahkamaa,et al.  A Method to Improve Efficiency in Welding Simulations for Simulation Driven Design , 2010 .

[25]  Yukio Ueda,et al.  A Predicting Method of Welding Residual Stress Using Source of Residual Stress (Papers Submitted to National Meeting Spring 1988) , 1988 .

[26]  Johan Wall.  Simulation-Driven Design of Complex Mechanical and Mechatronic Systems , 2007 .

[27]  Magnus Karlberg,et al.  Rotordynamical modelling of a fibre refiner during production , 2007 .

[28]  Preston G. Smith,et al.  Developing products in half the time , 1995 .

[29]  Lars-Erik Lindgren,et al.  FINITE ELEMENT MODELING AND SIMULATION OF WELDING. PART 3: EFFICIENCY AND INTEGRATION , 2001 .

[30]  Z. Cai,et al.  Efficient finite element approach for modelling of actual welded structures , 2003 .

[31]  Nicklas Bylund,et al.  Simulation driven product development applied to car body design , 2004 .

[32]  Agnes Muszynska,et al.  Rotor-to-stator, rub-related, thermal/mechanical effects in rotating machinery , 1995 .

[33]  Michael Smith,et al.  NeT bead on plate round robin: Comparison of transient thermal predictions and measurements , 2009 .

[34]  Preston G. Smith,et al.  Developing Products in Half the Time: New Rules, New Tools, 2nd Edition (Создание новых продуктов за половину времени: новые правила, новые инструменты) , 1997 .

[35]  Masahito Mochizuki,et al.  Numerical Analysis of Welding Residual Stress and Its Verification Using Neutron Diffraction Measurement , 2000 .

[36]  Hans R. Hansen.  Application of optimization methods within structural design. Practical design example , 1974 .

[37]  Lars-Erik Lindgren,et al.  FINITE ELEMENT MODELING AND SIMULATION OF WELDING. PART 2: IMPROVED MATERIAL MODELING , 2001 .

[38]  Ekkehard Ramm,et al.  Strategies for Tracing the Nonlinear Response Near Limit Points , 1981 .

[39]  Y. Chen,et al.  RESIDUAL STRESS IN WELDMENT , 1992 .

[40]  Yukio Ueda,et al.  Prediction of Residual Stresses in Butt Welded Plates Using Inherent Strains , 1993 .

[41]  Lennart Karlsson,et al.  Residual stresses and deformations in a welded thin-walled pipe , 1989 .

[42]  Shoichi Kiyoshima,et al.  Investigations on welding residual stresses in penetration nozzles by means of 3D thermal elastic plastic FEM and experiment , 2009 .

[43]  Arthur W. Lees,et al.  THE INFLUENCE OF TORSION ON ROTOR/STATOR CONTACT IN ROTATING MACHINERY , 1999 .

[44]  Giancarlo Genta,et al.  Vibration of Structures and Machines: Practical Aspects , 1992 .

[45]  Christopher E Truman,et al.  The NeT residual stress measurement and modelling round robin on a single weld bead-on-plate specimen , 2009 .

[46]  Nigel Cross,et al.  Engineering Design Methods: Strategies for Product Design , 1994 .

[47]  J. Goldak,et al.  Computational Welding Mechanics , 2005 .

[48]  H. H. Jeffcott.  XXVII. The lateral vibration of loaded shafts in the neighbourhood of a whirling speed.—The effect of want of balance , 1919 .

[49]  John Goldak,et al.  Computational weld mechanics , 1986 .

[50]  Agnes Muszynska,et al.  Chaotic responses of unbalanced rotor/bearing/stator systems with looseness or rubs , 1995 .

[51]  Peter Wriggers,et al.  A general procedure for the direct computation of turning and bifurcation points , 1990 .

[52]  Magnus Karlberg,et al.  Numerical investigation of an unbalanced rotor system with bearing clearance , 2003 .

[53]  R. Ganesan.  Dynamic response and stability of a rotor-support system with non-symmetric bearing clearances , 1996 .

[54]  Lars-Erik Lindgren,et al.  Computational welding mechanics : thermomechanical and microstructural simulations , 2007 .