Grid-Connected Photovoltaic System With Power Factor Correction

A combined grid-connection/power-factor-correction technique for a photovoltaic (PV) system is proposed in this letter. A maximum power point tracking dc/dc converter served as a charger for the battery bank. A bidirectional inverter is applied as a generator/discharger during daytime, supplying power to the load. The inverter can also be used as a charger to maintain the minimum required voltage level of the batteries when the PV power is insufficient. Experiments on a 1-kW PV system show satisfactory results of the power management and the unity power factor at the utility side.

[1]  Weidong Xiao,et al.  Topology Study of Photovoltaic Interface for Maximum Power Point Tracking , 2007, IEEE Transactions on Industrial Electronics.

[2]  Weidong Xiao,et al.  Regulation of Photovoltaic Voltage , 2007, IEEE Transactions on Industrial Electronics.

[3]  C. Y. Yen,et al.  Residential photovoltaic energy storage system , 1998, IEEE Trans. Ind. Electron..

[4]  T. Shinoda,et al.  Plasma display technologies for large area screen and cost reduction , 2006, IEEE Transactions on Plasma Science.

[5]  Jin-Sung Kim,et al.  The current injection method for AC plasma display panel (PDP) sustainer , 2004, IEEE Transactions on Industrial Electronics.

[6]  Joung-Hu Park,et al.  Dual-Module-Based Maximum Power Point Tracking Control of Photovoltaic Systems , 2006, IEEE Transactions on Industrial Electronics.

[7]  Johan H R Enslin,et al.  Integrated photovoltaic maximum power point tracking converter , 1997, IEEE Trans. Ind. Electron..

[8]  Jung-Min Kwon,et al.  Photovoltaic Power Conditioning System With Line Connection , 2006, IEEE Transactions on Industrial Electronics.

[9]  Henry Shu-Hung Chung,et al.  A comparative study of maximum-power-point trackers for photovoltaic panels using switching-frequency modulation scheme , 2004, IEEE Transactions on Industrial Electronics.

[10]  Liang Chen,et al.  Flyback inverter controlled by sensorless current MPPT for photovoltaic power system , 2005, IEEE Transactions on Industrial Electronics.

[11]  Myung-Joong Youn,et al.  An advanced sustaining technology for plasma display panel using voltage-balancing method , 2006, IEEE Transactions on Industrial Electronics.

[12]  Sang-Kyoo Han,et al.  A high efficiency ZVS PWM asymmetrical half bridge converter for plasma display panel sustaining power module , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).