The valorization of plastic solid waste (PSW) by primary to quaternary routes: From re-use to energy and chemicals

Polymers are the most versatile material in our modern day and age. With certain chemicals and additives (pigments, concentrates, anti-blockers, light transformers (LTs), UV-stabilizers, etc.), they become what we know as plastics. The aim of this review is to provide the reader with an in depth analysis regarding the recovery, treatment and recycling routes of plastic solid waste (PSW), as well as the main advantages and disadvantages associated with every route. Recovery and recycling of PSW can be categorized by four main routes, i.e. re-extrusion, mechanical, chemical and energy recovery. Re-extrusion (primary recycling) utilizes scrap plastics by re-introducing the reminder of certain extruded thermoplastics (mainly poly-α-olefins) into heat cycles within a processing line. When plastic articles are discarded after a number of life cycles, mechanical recycling techniques present themselves as a candidate for utilizing a percentage of the waste as recyclate and/or fillers. Collectively, all technologies that convert polymers to either monomers (monomer recycling) or petrochemicals (feedstock recycling) are referred to as chemical recycling. The technology behind its success is the depolymerization processes (e.g. thermolysis) that can result in a very profitable and sustainable industrial scheme, providing a high product yield and a minimal waste. Nevertheless, due to their high calorific value and embodied energy, plastics are being incinerated solely or in combination with municipal solid waste (MSW) in many developed countries. This review also presents a number of application and technologies currently being used to incinerate plastics. Cement kilns and fluidized beds are the two most common units used to recover energy from PSW or MSW with high PSW content. It is concluded that, tertiary (chemical methods) and quaternary (energy recovery) are robust enough to be investigated and researched in the near future, for they provide a very sustainable solution to the PSW cycle.

[1]  W. McCaffrey,et al.  Tertiary recycling of polyethylene: mechanism of liquid production from polyethylene by thermolysis/reactive distillation , 1998 .

[2]  J. Vehlow,et al.  Decomposition of organohalogen compounds in municipal solid waste incineration plants. Part I: Chlorofluorocarbons , 1993 .

[3]  Werner Kaminsky,et al.  Pyrolysis of poly(ethylene terephthalate) in a fluidised bed plant , 2004 .

[4]  Masaaki Itoh,et al.  Catalytic degradation of plastic waste into petrochemicals using Ga-ZSM-5 , 2008 .

[5]  J. Scheirs.  Polymer Recycling: Science, Technology and Applications , 1998 .

[6]  John C. Mackie,et al.  Formation and fate of PAH during the pyrolysis and fuel-rich combustion of coal primary tar , 2000 .

[7]  Forbes R McDougall,et al.  Integrated Solid Waste Management: A Lifecycle Inventory , 1995 .

[8]  Andreas Hornung,et al.  Kinetic study on the thermal degradation of polypropylene and polyethylene , 1999 .

[9]  M. Day,et al.  Pyrolysis of auto shredder residue: experiments with a laboratory screw kiln reactor ☆ , 1999 .

[10]  Adisa Azapagic,et al.  Sustainable development in practice : case studies for engineers and scientists , 2005 .

[11]  Jesper Ahrenfeldt.  Characterization of biomass producer gas as fuel for stationary gas engines in combined heat and power production , 2008 .

[12]  Andreas Hornung,et al.  Environmental engineering: Stepwise pyrolysis of plastic waste , 1999 .

[13]  W. T. Davis,et al.  Air Pollution: Its Origin and Control , 1976 .

[14]  Rafael Kandiyoti,et al.  Secondary reactions of flash pyrolysis tars measured in a fluidized bed pyrolysis reactor with some novel design features , 1989 .

[15]  Maria Laura Mastellone,et al.  Fluidized bed pyrolysis of a recycled polyethylene , 2002 .

[16]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[17]  J. F. Mastral,et al.  Theoretical prediction of product distribution of the pyrolysis of high density polyethylene , 2007 .

[18]  C. L. D. Ligny.  Coupling between diffusion and convection in radial dispersion of matter by fluid flow through packed beds , 1970 .

[19]  J. F. Mastral,et al.  Kinetics of pyrolysis of high density polyethylene. Comparison of isothermal and dynamic experiments , 2002 .

[20]  M. Aznar,et al.  Plastic waste elimination by co-gasification with coal and biomass in fluidized bed with air in pilot plant , 2006 .

[21]  G. Ball,et al.  Combustion products from the incineration of plastics , 1973 .

[22]  Takanobu Inada,et al.  Stress Analysis of the Packed Bed in Blast Furnace , 1997 .

[23]  Andrew Narvaez,et al.  Biomass gasification with air in an atmospheric bubbling fluidized bed. Effect of six operational variables on the quality of the produced raw gas , 1996 .

[24]  José A. Caballero,et al.  THERMOGRAVIMETRIC STUDIES ON THE THERMAL DECOMPOSITION OF POLYETHYLENE , 1996 .

[25]  C. Papaspyrides,et al.  Mechanical recycling of post-used HDPE crates using the restabilization technique. II: Influence of artificial weathering , 2000 .

[26]  J. Rodríguez-Mirasol,et al.  CO2 and steam gasification of a grapefruit skin char , 2002 .

[27]  Jan Baeyens,et al.  Modeling CFB biomass pyrolysis reactors , 2008 .

[28]  Rolando Zanzi,et al.  Rapid high-temperature pyrolysis of biomass in a free-fall reactor , 1996 .

[29]  Göran Finnveden,et al.  Life cycle assessment of energy from solid waste—part 1: general methodology and results , 2005 .

[30]  Jonathan Seville,et al.  The solids flow in the riser of a Circulating Fluidised Bed (CFB) viewed by Positron Emission Particle Tracking (PEPT) , 2007 .

[31]  Takeo Shiina,et al.  Life cycle inventory (LCI) of different forms of rice consumed in households in Japan , 2009 .

[32]  E. Hinrichsen,et al.  Modification of mechanical properties of recycled polypropylene from post-consumer containers. , 2008, Waste management.

[33]  J. Ceamanos,et al.  Fluidized bed thermal degradation products of HDPE in an inert atmosphere and in air–nitrogen mixtures , 2003 .

[34]  Isabel Cabrita,et al.  The study of reactions influencing the biomass steam gasification process , 2003 .

[35]  S. Al-Salem.  Influence of natural and accelerated weathering on various formulations of linear low density polyethylene (LLDPE) films , 2009 .

[36]  Khalid Mahmood Zia,et al.  Methods for polyurethane and polyurethane composites, recycling and recovery: A review , 2007 .

[37]  F. Pinto,et al.  Effect of experimental conditions on co-gasification of coal, biomass and plastics wastes with air/steam mixtures in a fluidized bed system☆ , 2003 .

[38]  J Baeyens,et al.  Thermal degradation of PMMA in fluidised beds. , 2004, Waste management.

[39]  F. Ng,et al.  Tertiary polymer recycling: study of polyethylene thermolysis as a first step to synthetic diesel fuel , 1999 .

[40]  A. W. Coats,et al.  Kinetic Parameters from Thermogravimetric Data , 1964, Nature.

[41]  K. Sjöström,et al.  Rapid pyrolysis of agricultural residues at high temperature , 2002 .

[42]  G N Demirer,et al.  Life cycle assessment of municipal solid waste management methods: Ankara case study. , 2006, Environment international.

[43]  M. Field,et al.  Rate of combustion of size-graded fractions of char from a low-rank coal between 1 200°K and 2 000°K , 1969 .

[44]  Masaaki Itoh,et al.  Development of a feedstock recycling process for converting waste plastics to petrochemicals , 2004 .

[45]  S M Al-Salem,et al.  Establishing an integrated databank for plastic manufacturers and converters in Kuwait. , 2009, Waste management.

[46]  Hai-Yong Kang,et al.  Electronic waste recycling: A review of U.S. infrastructure and technology options , 2005 .

[47]  G. San Miguel,et al.  Catalytic activity of zeolitic and mesostructured catalysts in the cracking of pure and waste polyolefins , 2007 .

[48]  Angela N. García,et al.  Pyrolysis of Polyethylene in a Fluidized Bed Reactor , 1994 .

[49]  Marcello Zolezzi,et al.  Conventional and fast pyrolysis of automobile shredder residues (ASR). , 2004, Waste management.

[50]  J. Brandrup,et al.  Recycling and Recovery of Plastics , 1996 .

[51]  I. Gulyurtlu,et al.  Co-combustion of coal and non-recyclable paper and plastic waste in a fluidised bed reactor☆ , 2003 .

[52]  T. Ariyama,et al.  Recycling of Waste Plastics in Blast Furnace(Plastic Recycling Technologies from the Viewpoint of the Energetics) , 2004 .

[53]  Rafael Bilbao,et al.  Kinetics of the thermal decomposition of polyurethane foams in nitrogen and air atmospheres , 1996 .

[54]  Raf Dewil,et al.  CFB cyclones at high temperature: Operational results and design assessment , 2008 .

[55]  G. Baldi,et al.  Styrene–butadiene rubber pyrolysis: Products, kinetics, modelling , 2008 .

[56]  W. Blasiak,et al.  Effect of operating conditions on tar and gas composition in high temperature air/steam gasification (HTAG) of plastic containing waste , 2006 .

[57]  A. Valavanidis,et al.  Persistent free radicals, heavy metals and PAHs generated in particulate soot emissions and residue ash from controlled combustion of common types of plastic. , 2008, Journal of hazardous materials.

[58]  J. Baeyens,et al.  The fluidized bed pyrolysis of shredded tyres: the influence of carbon particles, humidity, and temperature on the hydrodynamics , 1997 .

[59]  Musa R. Kamal,et al.  Thermolysis of polyethylene/polystyrene mixtures , 1996 .

[60]  Guoqian Chen,et al.  Emergy as embodied energy based assessment for local sustainability of a constructed wetland in Beijing , 2009 .

[61]  Y. Tamaura,et al.  GASIFICATION OF WASTE TYRE AND PLASTIC (PET) BY SOLAR THERMOCHEMICAL PROCESS FOR SOLAR ENERGY UTILIZATION , 1999 .

[62]  Orkun Ozturk,et al.  Examination of the possibility of recycling and utilizing recycled polyethylene and polypropylene , 2008 .

[63]  Decomposition of organohalogen compounds in municipal solid waste incineration plants. Part II: Co-combustion of CFC containing polyurethane foams , 1994 .

[64]  J Baeyens,et al.  Pulse jet cleaning of rigid filters: a literature review and introduction to process modelling , 2004 .

[65]  J. Kuipers,et al.  Development of a continuous rotating cone reactor pilot plant for the pyrolysis of polyethene and polypropene , 1998 .

[66]  H. Ozaki,et al.  Thermogravimetric Analysis of Waste Gasification for an Entrained-Flow Gasifier. , 2001 .

[67]  P. Lv,et al.  An experimental study on biomass air-steam gasification in a fluidized bed. , 2004, Bioresource technology.

[68]  D. T. Liang,et al.  Kinetic study of hydrated lime reaction with HCl. , 2003, Environmental science & technology.

[69]  A. S. Luyt,et al.  Physical properties of blends of LLDPE and an oxidized paraffin wax , 2001 .

[70]  Elias Klemm,et al.  Catalytic degradation of polyethylene using thermal gravimetric analysis and a cycled-spheres-reactor , 2001 .

[71]  J Baeyens,et al.  Removal of PCDD/F from flue gases in fixed or moving bed adsorbers. , 2004, Waste management.

[72]  J. Fink.  High temperature pyrolysis of plastics in contact with liquid steel , 1999 .

[73]  Dongsu Kim,et al.  Waste plastics as supplemental fuel in the blast furnace process: improving combustion efficiencies. , 2002, Journal of hazardous materials.

[74]  Linda J. Broadbelt,et al.  Tertiary Resource Recovery from Waste Polymers via Pyrolysis: Neat and Binary Mixture Reactions of Polypropylene and Polystyrene , 2001 .

[75]  N. Nevers,et al.  Air Pollution Control Engineering , 1994 .

[76]  W.P.M. van Swaaij,et al.  Techno-economic evaluation of high temperature pyrolysis processes for mixed plastic waste. , 1998 .

[77]  Gang Xiao,et al.  Gasification characteristics of MSW and an ANN prediction model. , 2009, Waste management.

[78]  S. Bhatia,et al.  Kinetic study of the thermal degradation of high density polyethylene , 2006 .

[79]  Hugo Marcelo Veit,et al.  Using mechanical processing in recycling printed wiring boards , 2002 .

[80]  M. R. Kamal,et al.  Thermolysis of polyethylene , 1995 .

[81]  W. Michaeli,et al.  Degradative extrusion as a pretreating process for chemical recycling of plastics waste , 1995 .

[82]  Jun Sadaki,et al.  The recycling of plastic wastes from discarded TV sets: comparing energy recovery with mechanical recycling in the context of life cycle assessment , 2008 .

[83]  Ahmed Ali Basfar,et al.  Natural weathering test for films of various formulations of low density polyethylene (LDPE) and linear low density polyethylene (LLDPE) , 2006 .

[84]  Paola Lettieri,et al.  Study of the Process Design and Flue Gas Treatment of an Industrial-Scale Energy-from-Waste Combustion Plant , 2007 .

[85]  W. Hoyle,et al.  Chemical aspects of plastics recycling , 1997 .

[86]  Paola Lettieri,et al.  Energy recovery from thermal processing of waste: a review , 2005 .

[87]  V. S. Patel,et al.  Life cycle assessment for waste management , 1996 .

[88]  P. D. Filippis,et al.  Gasification process of wastes containing PVC , 2002 .

[89]  W. Kaminsky,et al.  Olefins from polyolefins and mixed plastics by pyrolysis , 1995 .

[90]  V. Cozzani,et al.  Influence of Gas-Phase Reactions on the Product Yields Obtained in the Pyrolysis of Polyethylene , 1997 .

[91]  S. Oh,et al.  Thermogravimetric Evaluation for Pyrolysis Kinetics of Styrene-Butadiene Rubber , 2003 .

[92]  Thomas Malkow,et al.  Novel and innovative pyrolysis and gasification technologies for energy efficient and environmentally sound MSW disposal. , 2004, Waste management.

[93]  Paul T. Williams,et al.  Fluidised bed pyrolysis of low density polyethylene to produce petrochemical feedstock , 1999 .

[94]  R. Clift,et al.  Bubbles, Drops, and Particles , 1978 .

[95]  J. A. Conesa,et al.  Kinetic model of the pyrolysis of polyethylene in a fluidized bed reactor , 1994 .

[96]  Philip J. Smith,et al.  Modeling Effects of Soot and Turbulence-Radiation Coupling on Radiative Transfer in Turbulent Gaseous Combustion , 1995 .

[97]  Ibrahim Dincer,et al.  Exergy: Energy, Environment and Sustainable Development , 2007 .

[98]  Giovanni Andrea Blengini,et al.  Life cycle of buildings, demolition and recycling potential: A case study in Turin, Italy , 2009 .

[99]  H. S. Fogler,et al.  Elements of Chemical Reaction Engineering , 1986 .

[100]  Göran Finnveden,et al.  Life cycle assessment of energy from solid waste—part 2: landfilling compared to other treatment methods , 2005 .

[101]  Jerry March,et al.  Advanced Organic Chemistry: Reactions, Mechanisms, and Structure , 1977 .

[102]  Ewa Kowalska,et al.  Use of Post-Life Waste and Production Waste in Thermoplastic Polymer Compositions , 2002 .

[103]  Yoshio Morozumi,et al.  Numerical investigation of waste plastic injection in a blast furnace , 2008 .

[104]  P. García,et al.  Pyrolysis of high-density polyethylene in a fluidised bed reactor. Influence of the temperature and residence time , 2002 .

[105]  A. G. Buekens.  Resource recovery and waste treatment in Japan , 1978 .

[106]  A. Omer.  Energy, environment and sustainable development , 2008 .