Electrochemical and Transport Phenomena in Solid Oxide Fuel Cells

This paper begins with a brief review of the thermodynamic and electrochemical fundamentals of a solid oxide fuel cell (SOFC). Issues concerning energy budget and ideal energy conversion efficiency of the electrochemical processes in an SOFC are addressed. Chemical equilibrium is then discussed for the situations with internal reforming and shift reactions as an SOFC is fed with hydrocarbon fuel. Formulations accounting for electrical potential drops incurred by activation polarization, ohmic polarisation, and concentration polarization are reviewed. This leads to a discussion on numerical modeling and simulation for predicting the terminal voltage and power output of SOFCs. Key features associated with numerical simulation include strong coupling of ion transfer rates, electricity conduction, flow fields of fuel and oxidizer, concentrations of gas species, and temperature distributions. Simulation results based primarily on authors' research are presented as demonstration. The article concludes with a discussion of technical challenges in SOFCs and potential issues for future research.

[1]  A. Dicks.  Advances in catalysts for internal reforming in high temperature fuel cells , 1998 .

[2]  William J. Wepfer,et al.  A Mathematical Model of a Tubular Solid Oxide Fuel Cell , 1995 .

[3]  Norman F. Bessette,et al.  Modeling and simulation for solid oxide fuel cell power system , 1994 .

[4]  E. S. Rubin,et al.  Modeling the Performance of Flattened Tubular Solid Oxide Fuel Cell , 2005 .

[5]  I. Celik,et al.  A numerical study of cell-to-cell variations in a SOFC stack , 2004 .

[6]  Douglas J. Nelson,et al.  Fuel cell systems: efficient, flexible energy conversion for the 21st century , 2001, Proc. IEEE.

[7]  Frank A. Coutelieris,et al.  Fuel options for solid oxide fuel cells: A thermodynamic analysis , 2003 .

[8]  H. Inaba,et al.  Electrochemical Oxidation in a CH 4 ‐ H 2 O System at the Interface of a Pt Electrode and Y 2 O 3‐Stabilized ZrO2 Electrolyte I. Determination of the Predominant Reaction Process , 1998 .

[9]  Lars Sjunnesson,et al.  Combined solid oxide fuel cell and gas turbine systems for efficient power and heat generation , 2000 .

[10]  E. F. Sverdrup,et al.  Design of high-temperature solid-electrolyte fuel-cell batteries for maximum power output per unit volume , 1973 .

[11]  V. T. Srikar,et al.  Structural design considerations for micromachined solid oxide fuel cells , 2004 .

[12]  T Watanabe.  Fuel cell power system applications in Japan , 1997 .

[13]  R. Herbin,et al.  Three-dimensional numerical simulation for various geometries of solid oxide fuel cells , 1996 .

[14]  S. C. Singhal,et al.  Progress in Tubular Solid Oxide Fuel Cell Technology , 1999 .

[15]  R. M. Privette,et al.  Planar solid oxide fuel cell integrated system technology development , 1998 .

[16]  Ryuji Kikuchi,et al.  Study on steam reforming of CH4 and C2 hydrocarbons and carbon deposition on Ni-YSZ cermets , 2002 .

[17]  Peiwen Li,et al.  Numerical Modeling and Performance Study of a Tubular SOFC , 2004 .

[18]  J. Young,et al.  Thermodynamic and transport properties of gases for use in solid oxide fuel cell modelling , 2002 .

[19]  Kenichi Kawamura,et al.  Influence of the coexisting gases on the electrochemical reaction rates between 873 and 1173 K in a CH4–H2O/Pt/YSZ system , 2000 .

[20]  M. Chyu,et al.  Simulation of the chemical/electrochemical reactions and heat/mass transfer for a tubular SOFC in a stack , 2003 .

[21]  F J Gardner.  Thermodynamic processes in solid oxide and other fuel cells , 1997 .

[22]  Frank A. Coutelieris,et al.  The importance of the fuel choice on the efficiency of a solid oxide fuel cell system , 2003 .

[23]  M. Koyama,et al.  Object-based modeling of SOFC system: dynamic behavior of micro-tube SOFC , 2003 .

[24]  Christopher Yang,et al.  FUEL CELLS: Reaching the Era of Clean and Efficient Power Generation in the Twenty-First Century , 1999 .

[25]  Romesh Kumar,et al.  Thermal‐Hydraulic Model of a Monolithic Solid Oxide Fuel Cell , 1991 .

[26]  Vincenzo Antonucci,et al.  Partial oxidation of CH4 in solid oxide fuel cells: simulation model of the electrochemical reactor and experimental validation , 1996 .

[27]  Stefano Campanari,et al.  Thermodynamic model and parametric analysis of a tubular SOFC module , 2001 .

[28]  高橋 武彦,et al.  Science and technology of ceramic fuel cells , 1995 .

[29]  Jan Van herle,et al.  Ammonia as a fuel in solid oxide fuel cells , 2003 .

[30]  L. Schaefer,et al.  Multiple Transport Processes in Solid Oxide Fuel Cells , 2005 .

[31]  R. Peters,et al.  Internal reforming of methane in solid oxide fuel cell systems , 2002 .

[32]  Ryuji Kikuchi,et al.  Fuel flexibility in power generation by solid oxide fuel cells , 2002 .

[33]  Y. Jaluria,et al.  An Introduction to Heat Transfer , 1950 .

[34]  L. Kershenbaum,et al.  Modelling of an indirect internal reforming solid oxide fuel cell , 2002 .

[35]  J. T. Brown.  Solid oxide fuel cell technology , 1988 .

[36]  S. Singhal.  Solid oxide fuel cells for stationary, mobile, and military applications , 2002 .

[37]  M. Ippommatsu,et al.  Evaluation of a New Solid Oxide Fuel Cell System by Non‐isothermal Modeling , 1992 .

[38]  Minking K. Chyu,et al.  Novel gas distributors and optimization for high power density in fuel cells , 2005 .

[39]  M. Fowler,et al.  Performance comparison of Fick’s, dusty-gas and Stefan–Maxwell models to predict the concentration overpotential of a SOFC anode , 2003 .

[40]  Raymond Anthony George,et al.  Reducing the manufacturing cost of tubular solid oxide fuel cell technology , 1998 .

[41]  Comas Haynes,et al.  Characterizing heat transfer within a commercial-grade tubular solid oxide fuel cell for enhanced thermal management , 2001 .

[42]  Gianfranco DiGiuseppe,et al.  Fuel sensitivity tests in tubular solid oxide fuel cells , 2004 .

[43]  M. W. Chase.  JANAF thermochemical tables , 1986 .

[44]  L. Schaefer,et al.  A numerical model coupling the heat and gas species' transport processes in a tubular SOFC , 2004 .

[45]  Aristide F. Massardo,et al.  Internal Reforming Solid Oxide Fuel Cell-Gas Turbine Combined Cycles (IRSOFC-GT): Part A— Cell Model and Cycle Thermodynamic Analysis , 1998 .

[46]  Caine M. Finnerty,et al.  Internal reforming over nickel/zirconia anodes in SOFCS oparating on methane : influence of anode formulation, pre-treatment and operating conditions , 2000 .

[47]  Hiroshi Iwai,et al.  SOLID OXIDE FUEL CELL AND MICRO GAS TURBINE HYBRID CYCLE AND RELATED FLUID FLOW AND HEAT TRANSFER , 2002 .

[48]  Atsushi Tsutsumi,et al.  Combinations of solid oxide fuel cell and several enhanced gas turbine cycles , 2003 .

[49]  Nicholas P. Chopey,et al.  Handbook of Chemical Engineering Calculations , 2003 .

[50]  H. Inaba,et al.  Electrochemical Oxidation in a CH 4 ‐ H 2 O System at the Interface of a Pt Electrode and Y 2 O 3‐Stabilized ZrO2 Electrolyte II. The Rates of Electrochemical Reactions Taking Place in Parallel , 1998 .

[51]  L. Carrette,et al.  Fuel Cells - Fundamentals and Applications , 2001 .

[52]  S. Harvey,et al.  Gas Turbine Cycles With Solid Oxide Fuel Cells—Part I: Improved Gas Turbine Power Plant Efficiency by Use of Recycled Exhaust Gases and Fuel Cell Technology , 1994 .

[53]  K. Kendall,et al.  SOFC system with integrated catalytic fuel processing , 2000 .

[54]  S. Chan,et al.  A complete polarization model of a solid oxide fuel cell and its sensitivity to the change of cell component thickness , 2001 .

[55]  Tohru Kato,et al.  Numerical analysis of output characteristics of tubular SOFC with internal reformer , 2001 .

[56]  Don W. Green,et al.  Perry's Chemical Engineers' Handbook , 2007 .

[57]  Satoshi Ohara,et al.  Effect of aging on conductivity of yttria stabilized zirconia , 2004 .

[58]  Ernst Riensche,et al.  Pre-reforming of natural gas in solid oxide fuel-cell systems , 1998 .

[59]  Kevin R. Keegan,et al.  Analysis of a Planar Solid Oxide Fuel Cell Based Automotive Auxiliary Power Unit , 2002 .

[60]  E. Riensche,et al.  Methane/steam reforming kinetics for solid oxide fuel cells , 1994 .

[61]  F Bevc.  Advances in solid oxide fuel cells and integrated power plants , 1997 .

[62]  S. Hyun,et al.  Fabrication and characteristics of anode-supported flat-tube solid oxide fuel cell , 2003 .

[63]  Kohei Ito,et al.  Performance analysis of planar-type unit SOFC considering current and temperature distributions , 2000 .

[64]  Y. Çengel,et al.  Thermodynamics : An Engineering Approach , 1989 .

[65]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.

[66]  Theodore F. Smith,et al.  TECHNICAL NOTE INCORPORATION OF INTERNAL SURFACE RADIANT EXCHANGE IN THE FINITE-VOLUME METHOD , 1993 .

[67]  S. Singhal.  Advances in solid oxide fuel cell technology , 2000 .

[68]  M. Khaleel,et al.  Three-dimensional thermo-fluid electrochemical modeling of planar SOFC stacks , 2003 .

[69]  Hiroshi Iwai,et al.  Numerical Investigation on the Strategies for Reducing the Cell Temperature Gradient of an Indirect Internal Reforming Tubular SOFC , 2004 .

[70]  Laura Schaefer,et al.  Numerical Simulation of Heat Transfer and Fluid Flow of a Flat-Tube High Power Density Solid Oxide Fuel Cell , 2004 .