Model predictive control of a catalytic reverse flow reactor

This paper deals with the control of a catalytic reverse flow reactor. The aim of this process is to reduce, by catalytic reaction, the amount of volatile organic compounds (VOCs) released into the atmosphere. The peculiarity of this process is that the gas flow inside the reactor is periodically reversed in order to trap the heat released during the reaction. This allows use of the reactor in a heat saving mode. The goal of this work is to provide a model predictive control (MPC) framework to significantly enhance the poor overall performance currently obtained through the actual control strategy. It is directly addressed for the nonlinear parabolic partial differential equations (PDEs) that describe the catalytic reverse flow reactor. In the context of the application of MPC to this particular distributed parameter system, we propose a method that aims to reduce the online computation time needed by the control algorithm. The nonlinear model is linearized around a given operating trajectory to obtain the model to be solved on-line in the approach. MPC strategy combined with internal model control (IMC) structure allows using less accurate and less time-consuming control algorithm. Method efficiency is illustrated in simulation for this single-input-single-output system.

[1]  Antonios Armaou,et al.  Analysis and control of parabolic PDE systems with input constraints , 2003, Autom..

[2]  A. A. Patwardhan,et al.  Nonlinear model-predictive control of distributed-parameter systems , 1992 .

[3]  Jason M. Keith.  Controlling reverse-flow reactors via multiscale transient thermal dispersion , 2003 .

[4]  Warren D. Seider,et al.  Model-predictive control of the Czochralski crystallization process. Part I. Conduction-dominated melt , 1997 .

[5]  R. Fletcher.  Practical Methods of Optimization , 1988 .

[6]  P. Daoutidis,et al.  Finite-dimensional control of parabolic PDE systems using approximate inertial manifolds , 1997, Proceedings of the 36th IEEE Conference on Decision and Control.

[7]  J. Rawlings,et al.  Feedback control of chemical processes using on-line optimization techniques , 1990 .

[8]  Karlene A. Hoo,et al.  Low-order model identification for implementable control solutions of distributed parameter systems , 2002 .

[9]  G. Bunimovich,et al.  Reverse-Flow Operation in Fixed Bed Catalytic Reactors , 1996 .

[10]  Paul M. Frank,et al.  Advances in control : highlights of ECC '99 , 1999 .

[11]  Ulrich Nieken,et al.  Limiting cases and approximate solutions for fixed-bed reactors with periodic flow reversal , 1995 .

[12]  Amnon Pazy,et al.  Semigroups of Linear Operators and Applications to Partial Differential Equations , 1992, Applied Mathematical Sciences.

[13]  Evanghelos Zafiriou,et al.  Robust process control , 1987 .

[14]  Antonello Barresi,et al.  Simplified procedure for design of catalytic combustors with periodic flow reversal , 2001 .

[15]  Karlene A. Hoo,et al.  Low-order Control-relevant Models for A Class of Distributed Parameter Systems , 2001 .

[16]  Y. Toure,et al.  An extension of IMC to boundary-distributed parameter systems , 1997, 1997 IEEE International Conference on Systems, Man, and Cybernetics. Computational Cybernetics and Simulation.

[17]  Ahmet Palazoglu,et al.  Control of nonlinear distributed parameter processes using symmetry groups and invariance conditions , 2002 .

[18]  Mohamed-Chaker Larabi,et al.  Predictive control of a nonlinear distributed parameter system: Real time control of a painting film drying process , 2000 .

[19]  Hector Budman,et al.  Control of a nonadiabatic packed bed reactor under periodic flow reversal , 1996 .

[20]  Michael A. Henson,et al.  Nonlinear model predictive control: current status and future directions , 1998 .

[21]  S. Joe Qin,et al.  A survey of industrial model predictive control technology , 2003 .

[22]  Jay H. Lee,et al.  Model predictive control: past, present and future , 1999 .

[23]  Jean Biston,et al.  Modeling of a distributed parameter process with a variable boundary: application to its control , 1994 .

[24]  Elijah Polak,et al.  Computational methods in optimization , 1971 .

[25]  P. Daoutidis,et al.  Robust control of hyperbolic PDE systems , 1998 .

[26]  Hassan Hammouri,et al.  Observer design for reverse flow reactor , 2004 .

[27]  P. Marquis,et al.  SMOC, a bridge between state space and model predictive controllers: Application to the automation of a hydrotreating unit , 1988 .

[28]  Ulrich Nieken,et al.  Control of the ignited steady state in autothermal fixed-bed reactors for catalytic combustion , 1994 .

[29]  James B. Rawlings,et al.  Tutorial overview of model predictive control , 2000 .

[30]  P. Christofides,et al.  Dynamic optimization of dissipative PDE systems using nonlinear order reduction , 2002 .

[31]  Hugo S. Caram,et al.  The design of reverse flow reactors for catalytic combustion systems , 1995 .

[32]  John C. Friedly,et al.  Dynamic Behavior of Processes , 1973 .

[33]  Viorel Barbu,et al.  Analysis and control of nonlinear infinite dimensional systems , 1993 .

[34]  K. Roel Westerterp,et al.  Air Purification by Catalytic Oxidation in a Reactor with Periodic Flow Reversal , 1992 .

[35]  Karlene A. Hoo,et al.  System identification and model-based control for distributed parameter systems , 2004, Comput. Chem. Eng..

[36]  K. R. Westerterp,et al.  Catalytic combustion of very lean mixtures in a reverse flow reactor using an internal electrical heater. , 1997 .

[37]  Mark J. Balas,et al.  Stable Feedback Control of Linear Distributed Parameter Systems: Time and Frequency Domain Conditions☆ , 1998 .

[38]  David Q. Mayne,et al.  Constrained model predictive control: Stability and optimality , 2000, Autom..

[39]  Ahmet Karakas,et al.  Control of nonlinear distributed parameter systems using generalized invariants , 2000, Autom..

[40]  R. Pontier,et al.  Reverse flow reactor at short switching periods for VOC combustion , 2001 .