A review on new bio-based constituents for natural fiber-polymer composites

Composite materials based on renewable agricultural and biomass feedstocks are increasingly utilized as these products significantly offset the use of fossil fuels and reduce greenhouse gas emissions in comparison with conventional petroleum-based materials. However, the inclusion of natural fibers in polymers introduces several challenges, such as excess water absorption and poor thermal properties, which need to be overcome to produce materials with comparable properties to the conventional composite materials. Instead of using rather expensive chemical and physical modification methods to eliminate these aforementioned challenges, a new trend of utilizing waste, residues, and process by-products in natural fiber-polymer composites (NFPCs) as additives or reinforcements may bring considerable enhancements in the properties of NFPCs in a sustainable and resilient manner. In this paper, the effects of waste materials, residues or process by-products of multiple types on NFPCs are critically reviewed and their potential as NFPC constituents is evaluated.

[1]  D. Bhattacharyya,et al.  A novel approach in organic waste utilization through biochar addition in wood/polypropylene composites. , 2015, Waste management.

[2]  Hanafi Ismail,et al.  Comparison of the mechanical properties of rice husk powder filled polypropylene composites with talc filled polypropylene composites , 2002 .

[3]  R. Rowell,et al.  Characterization and Factors Effecting Fiber Properties , 2000 .

[4]  V. Castaño,et al.  Composites from chicken feathers quill and recycled polypropylene , 2015 .

[5]  J. Kenny,et al.  A Review on Natural Fibre-Based Composites—Part II , 2005 .

[6]  M. Ansell,et al.  Properties of wood plastic composite panels made from waste sanding dusts and nanoclay , 2014 .

[7]  P. Stagnaro,et al.  Composites based on polypropylene and short wool fibres , 2013 .

[8]  Amar K. Mohanty,et al.  1 – Commercial potential and competitiveness of natural fiber composites , 2015 .

[9]  C. Baillie.  Green composites : polymer composites and the environment , 2005 .

[10]  J. Jog,et al.  Natural fiber polymer composites: A review , 1999 .

[11]  Mikael Skrifvars,et al.  A Review of Natural Fibers Used in Biocomposites: Plant, Animal and Regenerated Cellulose Fibers , 2015 .

[12]  Kin-tak Lau,et al.  Natural fibre-reinforced composites for bioengineering and environmental engineering , 2009 .

[13]  H. Rahimi,et al.  Surface treatment of wood polymer composites for adhesive bonding , 2011 .

[14]  Lívia Dányádi,et al.  Effect of various surface modifications of wood flour on the properties of PP/wood composites , 2010 .

[15]  D. Bhattacharyya,et al.  Mechanical and flammability characterisations of biochar/polypropylene biocomposites , 2016 .

[16]  A. Célino,et al.  The hygroscopic behavior of plant fibers: a review , 2013, Front. Chem..

[17]  R. Kozłowski,et al.  Flammability and fire resistance of composites reinforced by natural fibers , 2008 .

[18]  J. Jang,et al.  Improvement of the flame retardancy of paper-sludge/polypropylene composite , 2000 .

[19]  Z. Ishak,et al.  Kenaf fiber reinforced composites: A review , 2011 .

[20]  S. Karlsson,et al.  Comparison of water absorption in natural cellulosic fibres from wood and one-year crops in polypropylene composites and its influence on their mechanical properties , 2004 .

[21]  Yan Yu,et al.  Bamboo fibers for composite applications: a mechanical and morphological investigation , 2014, Journal of Materials Science.

[22]  B. Kandola,et al.  Flammability and fire resistance of composites , 2005 .

[23]  Qinglin Wu,et al.  Thermal decomposition kinetics of natural fibers: Activation energy with dynamic thermogravimetric analysis , 2008 .

[24]  M. Vallejos,et al.  Full exploitation of Cannabis sativa as reinforcement/filler of thermoplastic composite materials , 2007 .

[25]  R. Fangueiro,et al.  Physical Modification of Natural Fibers and Thermoplastic Films for Composites — A Review , 2009 .

[26]  Hao Wang,et al.  A review on the tensile properties of natural fiber reinforced polymer composites , 2011 .

[27]  S. Mohanty,et al.  Dynamic mechanical and thermal properties of MAPE treated jute/HDPE composites , 2006 .

[28]  D. Bhattacharyya,et al.  Structure-mechanics property relationship of waste derived biochars. , 2015, The Science of the total environment.

[29]  Yiqi Yang,et al.  Composites from ground chicken quill and polypropylene , 2008 .

[30]  Holger Militz,et al.  Wood polymer composites and their contribution to cascading utilisation , 2016 .

[31]  S. Morris.  Economics of sheep production. , 2009 .

[32]  Hao Wang,et al.  Improvement on the properties of polylactic acid (PLA) using bamboo charcoal particles , 2015 .

[33]  B. Rekha,et al.  A Comparative Study on Tensile Behaviour of Plant and Animal Fiber Reinforced Composites , 2013 .

[34]  Vijay Kumar Thakur,et al.  Processing and characterization of natural cellulose fibers/thermoset polymer composites. , 2014, Carbohydrate polymers.

[35]  Qinglin Wu,et al.  Introduction to Wood and Natural Fiber Composites , 2013 .

[36]  N. Ayrilmis,et al.  Waste pine cones as a source of reinforcing fillers for thermoplastic composites , 2010 .

[37]  Arlindo Silva,et al.  Green composites: A review of adequate materials for automotive applications , 2013 .

[38]  Yong Zhang,et al.  Ink-eliminated waste paper sludge flour-filled polypropylene composites with different coupling agent treatments , 2003 .

[39]  Sabu Thomas,et al.  A study of the mechanical properties of randomly oriented short banana and sisal hybrid fiber reinforced polyester composites , 2005 .

[40]  Mohammad Jawaid,et al.  A Review on Natural Fiber Reinforced Polymer Composite and Its Applications , 2015 .

[41]  Elisa Zini,et al.  Green composites: An overview , 2011 .

[42]  D. Bhattacharyya,et al.  Performance of different intumescent ammonium polyphosphate flame retardants in PP/kenaf fibre composites , 2014 .

[43]  Wen-Bin Young,et al.  Study on residual stresses of thin-walled injection molding , 2005 .

[44]  A. Błędzki,et al.  Composites reinforced with cellulose based fibres , 1999 .

[45]  S. Mishra,et al.  14 – Long-term performance of natural-fiber composites , 2008 .

[46]  J. Agnelli,et al.  Lignin as additive in polypropylene/coir composites: Thermal, mechanical and morphological properties , 2012 .

[47]  Y. Hamzeh,et al.  A comparative study on the effects of Coriolus versicolor on properties of HDPE/wood flour/paper sludge composites , 2012 .

[48]  G. Das,et al.  Effect of fiber parameters on physical, mechanical and water absorption behaviour of coir fiber–epoxy composites , 2016 .

[49]  I. Usta,et al.  Properties of Recycled Polycarbonate/Waste Silk and Cotton Fiber Polymer Composites , 2008 .

[50]  P. Chang,et al.  Bamboo fiber and its reinforced composites: structure and properties , 2012, Cellulose.

[51]  Qinglin Wu,et al.  Chemical Coupling in Wood Fiber and Polymer Composites: A Review of Coupling Agents and Treatments , 2000 .

[52]  R. Wool,et al.  Mechanical properties of chicken feather fibers , 2011 .

[53]  D. Bhattacharyya,et al.  A parametric study of mechanical and flammability properties of biochar reinforced polypropylene composites , 2016 .

[54]  Yentl Swolfs,et al.  Fibre hybridisation in polymer composites: a review , 2014 .

[55]  P. Srinivasan,et al.  Characterisation of agricultural waste-derived biochars and their sorption potential for sulfamethoxazole in pasture soil: a spectroscopic investigation. , 2015, The Science of the total environment.

[56]  L. Medina,et al.  1.11 Natural Fibers , 2018 .

[57]  Z. Ishak,et al.  The effect of lignin as a compatibilizer on the physical properties of coconut fiber–polypropylene composites , 2000 .

[58]  A. Mohanty,et al.  Natural-fiber composites in the automotive sector , 2008 .

[59]  D. Koçak,et al.  The use of palm leaf fibres as reinforcements in composites , 2015 .

[60]  Nick Tucker,et al.  Natural-fibre composites in structural applications , 2008 .

[61]  Joseph Fiksel,et al.  Designing resilient, sustainable systems. , 2003, Environmental science & technology.

[62]  S. Sapuan,et al.  An investigation of the processability of natural fibre reinforced polymer composites on shallow and flat thin-walled parts by injection moulding process , 2013 .

[63]  D. Bhattacharyya,et al.  Characterisation of waste derived biochar added biocomposites: chemical and thermal modifications. , 2016, The Science of the total environment.

[64]  D. Porter,et al.  Can silk become an effective reinforcing fibre? A property comparison with flax and glass reinforced composites , 2014 .

[65]  M. A. Quaiyyum,et al.  Characterization of plant and animal based natural fibers reinforced polypropylene composites and their comparative study , 2010 .

[66]  A. Błędzki,et al.  Biocomposites reinforced with natural fibers: 2000–2010 , 2012 .

[67]  L. Avérous,et al.  Antioxidant properties of lignin in polypropylene , 2003 .

[68]  D. Bhattacharyya,et al.  Extruded short wool fibre composites: Mechanical and fire retardant properties , 2014 .

[69]  D. DeVallance,et al.  Investigation of hardwood biochar as a replacement for wood flour in wood–polypropylene composites , 2016 .

[70]  Mizi Fan,et al.  Wood fibres as reinforcements in natural fibre composites: structure, properties, processing and applications , 2014 .

[71]  T. Rials,et al.  Effects of hemicellulose extraction on properties of wood flour and wood–plastic composites , 2012 .

[72]  Anita Grozdanov,et al.  Natural Fiber Eco-Composites , 2007 .

[73]  Kazushi Yamada,et al.  Compression and injection molding techniques for natural fiber composites , 2014 .

[74]  Kin-tak Lau,et al.  Mechanical and thermal properties of chicken feather fiber/PLA green composites , 2009 .

[75]  P. A. Cooper,et al.  Study of moisture absorption in natural fiber plastic composites , 2006 .

[76]  R. Rowlands,et al.  Effects of wood fiber characteristics on mechanical properties of wood/polypropylene composites , 2003 .

[77]  Jim Holbery,et al.  Natural-fiber-reinforced polymer composites in automotive applications , 2006 .

[78]  N. Reddy,et al.  Biocompatible natural silk fibers from argema mittrei , 2012 .

[79]  Craig M. Clemons.  Raw materials for wood-polymer composites. , 2008 .

[80]  Jungil Son,et al.  Role of paper sludge particle size and extrusion temperature on performance of paper sludge–thermoplastic polymer composites , 2001 .

[81]  Benjamin M. Wood,et al.  Use of lignin as a compatibiliser in hemp/epoxy composites , 2011 .

[82]  Sabu Thomas,et al.  Water sorption in oil palm fiber reinforced phenol formaldehyde composites , 2002 .

[83]  C. Baley,et al.  Investigations on the recycling of hemp and sisal fibre reinforced polypropylene composites , 2007 .

[84]  C. Baley,et al.  Effects of thermo mechanical processing on the mechanical properties of biocomposite flax fibers evaluated by nanoindentation , 2010 .

[85]  D. Gardner,et al.  Characterizing the mechanism of improved adhesion of modified wood plastic composite (WPC) surfaces , 2007 .

[86]  Jingxin Wang,et al.  The effect of bio-carbon addition on the electrical, mechanical, and thermal properties of polyvinyl alcohol/biochar composites , 2016 .

[87]  D. Bhattacharyya,et al.  Development of fire resistant wool polymer composites: Mechanical performance and fire simulation with design perspectives , 2016 .

[88]  Zhongyi Zhang,et al.  Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites , 2007 .

[89]  M. Wolcott,et al.  Effect of fiber length on processing and properties of extruded wood-fiber/HDPE composites , 2008 .

[90]  H. Dhakal.  Mechanical performance of PC-based biocomposites , 2015 .

[91]  Walter F. Schmidt,et al.  Polyethylene reinforced with keratin fibers obtained from chicken feathers , 2005 .

[92]  D. Bhattacharyya,et al.  Biocomposites from waste derived biochars: Mechanical, thermal, chemical, and morphological properties. , 2016, Waste management.

[93]  Nadia Salih,et al.  Biolubricants: raw materials, chemical modifications and environmental benefits. , 2010 .

[94]  M. Misra,et al.  Studies on mechanical, thermal, and morphological characteristics of biocomposites from biodegradable polymer blends and natural fibers , 2015 .

[95]  Xuehong Lu,et al.  From waste to functional additive: toughening epoxy resin with lignin. , 2014, ACS applied materials & interfaces.

[96]  S. Joshi,et al.  Are natural fiber composites environmentally superior to glass fiber reinforced composites , 2004 .

[97]  D. Bhattacharyya,et al.  Sustainable eco–composites obtained from waste derived biochar: a consideration in performance properties, production costs, and environmental impact , 2016 .

[98]  David P. Harper,et al.  Effect of Wood Species on Water Sorption and Durability of Wood-Plastic Composites , 2008 .

[99]  M. Kleber,et al.  Water uptake in biochars: The roles of porosity and hydrophobicity , 2014 .

[100]  Y. Hamzeh,et al.  Effects of Waste Paper Sludge on the Physico-Mechanical Properties of High Density Polyethylene/Wood Flour Composites , 2011 .

[101]  Martin K. Patel,et al.  Life-cycle Assessment of Bio-based Polymers and Natural Fiber Composites , 2002 .

[102]  Kevin L. Simmons,et al.  Natural Fiber Composites: A Review , 2010 .

[103]  N. Reddy,et al.  Biofibers from agricultural byproducts for industrial applications. , 2005, Trends in biotechnology.

[104]  D. Mueller.  Improving the Impact Strength of Natural Fiber Reinforced Composites by Specifically Designed Material and Process Parameters , 2004 .

[105]  M. Sain,et al.  9 – Green fibre thermoplastic composites , 2004 .

[106]  Farhang Pourboghrat,et al.  Kenaf natural fiber reinforced polypropylene composites: A discussion on manufacturing problems and solutions , 2007 .

[107]  K. Adekunle.  Surface Treatments of Natural Fibres—A Review: Part 1 , 2015 .

[108]  L. Vlaev,et al.  Kinetics and thermodynamics of water adsorption onto rice husks ash filled polypropene composites during soaking , 2009 .

[109]  M. Bassyouni,et al.  The use of rice straw and husk fibers as reinforcements in composites , 2015 .

[110]  P. Wambua,et al.  Natural fibres: can they replace glass in fibre reinforced plastics? , 2001 .

[111]  S. Najafi,et al.  Long-term water uptake behavior of natural fiber/polypropylene composites , 2006 .

[112]  Harwinder Singh,et al.  Solid waste-based hybrid natural fiber polymeric composites , 2015 .

[113]  M. Reboredo,et al.  Moisture diffusion in polyester–woodflour composites , 1999 .

[114]  S. H. P. Bettini,et al.  Effect of Process Parameters and Composition on Mechanical, Thermal, and Morphological Properties of Polypropylene/Sawdust Composites , 2008 .

[115]  A. Błędzki,et al.  Processing techniques for natural- and wood-fibre composites , 2008 .

[116]  S. Najafi.  Use of recycled plastics in wood plastic composites – A review , 2013 .

[117]  R. Reis,et al.  Novel cork-polymer composites reinforced with short natural coconut fibres : effect of fibre loading and coupling agent addition , 2013 .

[118]  H. Rashed,et al.  Effects of Process Parameters on Tensile Strength of Jute Fiber Reinforced Thermoplastic Composites , 2008 .

[119]  M. Reboredo,et al.  Lignin in jute fabric–polypropylene composites , 2009 .

[120]  D. Bhattacharyya,et al.  A sustainable and resilient approach through biochar addition in wood polymer composites. , 2015, The Science of the total environment.

[121]  I. Cesarino,et al.  Studies of lignin as reinforcement for plastics composites , 2016 .

[122]  A. Ashori,et al.  Hybrid composites made from recycled materials: moisture absorption and thickness swelling behavior. , 2010, Bioresource technology.

[123]  G. Ahmetli,et al.  Epoxy composites based on inexpensive char filler obtained from plastic waste and natural resources , 2013 .

[124]  R. Lappalainen,et al.  Utilization of agricultural and forest industry waste and residues in natural fiber-polymer composites: A review. , 2016, Waste management.

[125]  Hans Lilholt,et al.  1.10 – Natural Organic Fibers , 2000 .

[126]  S. M. Sapuan,et al.  Influence of fiber content on the mechanical and thermal properties of Kenaf fiber reinforced thermoplastic polyurethane composites , 2012 .

[127]  A. Patrucco,et al.  Wool keratin-polypropylene composites: Properties and thermal degradation , 2013 .

[128]  M. Salim,et al.  Intake, selection, apparent digestibility and chemical composition of Pennisetum purpureum and Cajanus cajan foliage as utilized by lactating goats , 1988 .

[129]  D. Bhattacharyya,et al.  Nanoindentation assisted analysis of biochar added biocomposites , 2016 .

[130]  K. Pickering,et al.  A review of recent developments in natural fibre composites and their mechanical performance , 2016 .

[131]  A. Elayaperumal,et al.  Prediction of tensile properties of hybrid-natural fiber composites , 2012 .

[132]  R. S. Williams,et al.  Opportunities for using wood and biofibers for energy, chemical feedstocks, and structural applications , 2008 .

[133]  A. Ashori.  Hybrid Composites from Waste Materials , 2010 .

[134]  Sabu Thomas,et al.  Effects of environment on the properties of low-density polyethylene composites reinforced with pineapple-leaf fibre , 1998 .

[135]  Andrew C. Long,et al.  Liquid Moulding Technologies , 1997 .

[136]  Sabu Thomas,et al.  A review on interface modification and characterization of natural fiber reinforced plastic composites , 2001 .

[137]  Anu Gupta.  Synthesis, chemical resistance, and water absorption of bamboo fiber reinforced epoxy composites , 2016 .