An analytical cost estimation model for the design of axisymmetric components with open-die forging technology

Open-die forging is a manufacturing process commonly used for realising simple shaped components with high mechanical performances and limited capability in terms of production volume. To date, an analytical model for estimating the costs of components manufactured with this technology is still an open issue. The paper aims to define an analytical model for cost estimation of axisymmetric components manufactured by open-die forging technology. The model is grounded on the analysis of geometrical features available at the design stage providing a detailed cost breakdown in relation to all the process phases and the raw material. The model allows predicting product cost, linking geometrical features and cost items, to carry out design-to-cost actions oriented to the reduction of manufacturing cost. The model is mainly conceived for design engineers, cost engineers and buyers, respectively, for improving the product design, the manufacturing process and the supply chain. Cost model and related schemas for collecting equations and data are presented, including the approach for sizing the raw material and a set of rules for modelling the related cost. Finally, analytic equations for modelling the cost of the whole forging process (i.e. billet cutting, heating, pre-smoothing, smoothing, upsetting, max-shoulder cogging, necking and shoulders cogging) are reported. The cost model has been tested on eight cylindrical parts such as discs and shafts with different shapes, dimensions and materials. Two forge masters have been involved in the testing phase. The absolute average deviation between the actual and estimated costs is approximately 4% for raw material and 21% for the process. The absolute average deviation on the total cost (raw material and manufacturing process) is approximately 5%.

[1]  Michele Germani,et al.  Development of complex products and production strategies using a multi-objective conceptual design approach , 2018 .

[2]  Michele Germani,et al.  A Multi-objective Design Approach to Include Material, Manufacturing and Assembly Costs in the Early Design Phase , 2016 .

[3]  Oleg E. Markov,et al.  Computerized simulation of shortened ingots with a controlled crystallization for manufacturing of high-quality forgings , 2019, The International Journal of Advanced Manufacturing Technology.

[4]  Navee Chiadamrong,et al.  The development of an economic quality cost model , 2003 .

[5]  Haytham H. Elmousalami.  Artificial Intelligence and Parametric Construction Cost Estimate Modeling: State-of-the-Art Review , 2020 .

[6]  H. S. Wang.  Application of BPN with feature-based models on cost estimation of plastic injection products , 2007, Comput. Ind. Eng..

[7]  Tarek Hegazy,et al.  NEURAL NETWORK MODEL FOR PARAMETRIC COST ESTIMATION OF HIGHWAY PROJECTS , 1998 .

[8]  Taylan Altan,et al.  Cold And Hot Forging: Fundamentals And Applications , 2004 .

[9]  Michele Germani,et al.  Analytical Cost Estimation Model in High Pressure Die Casting , 2017 .

[10]  Richard Curran,et al.  Cost Estimation of Machined Parts within an Aerospace Supply Chain , 2006, Concurr. Eng. Res. Appl..

[11]  B. Ravi,et al.  Casting cost estimation in an integrated product and process design environment , 2006, Int. J. Comput. Integr. Manuf..

[12]  Yuchun Xu,et al.  Cost Engineering for manufacturing: Current and future research , 2012, Int. J. Comput. Integr. Manuf..

[13]  Michele Germani,et al.  A framework for analytical cost estimation of mechanical components based on manufacturing knowledge representation , 2020 .

[14]  William A. Young,et al.  A rule-based approach to predict forging volume for cost estimation during product design , 2010 .

[15]  Haytham H. Elmousalami.  Comparison of Artificial Intelligence Techniques for Project Conceptual Cost Prediction: A Case Study and Comparative Analysis , 2021, IEEE Transactions on Engineering Management.

[16]  David Kazmer,et al.  Early cost estimation for injection molded components , 2000 .

[17]  Tim Menzies,et al.  Data Mining Methods and Cost Estimation Models: Why is it So Hard to Infuse New Ideas? , 2015, 2015 30th IEEE/ACM International Conference on Automated Software Engineering Workshop (ASEW).

[18]  Ahmed Al-Ashaab,et al.  An analogy based estimation framework for design rework efforts , 2013, J. Intell. Manuf..

[19]  Xinsheng Xu,et al.  A model for manufacturing cost estimation based on machining feature. , 2006 .

[20]  Steve Wiseall,et al.  Comparison of Machine Learning methods applied to the estimation of manufacturing cost of jet engine components , 2016 .

[21]  Wolfgang Beitz,et al.  Engineering Design: A Systematic Approach , 1984 .

[22]  Alexander V. Perig,et al.  A new process for forging shafts with convex dies. Research into the stressed state , 2017 .

[23]  S. Tichkiewitch,et al.  A FAST AND RELIABLE COST-ESTIMATION TOOL FOR HOT­ FORGED PARTS. , 1999 .

[24]  Michele Germani,et al.  Design for Manufacturing and Assembly vs. Design to Cost: Toward a Multi-objective Approach for Decision-making Strategies During Conceptual Design of Complex Products , 2016 .

[25]  Charles Wick,et al.  Tool and manufacturing engineers handbook : a reference book for manufacturing engineers, managers, and technicians , 1983 .

[26]  Guido Berti,et al.  Tool Cost Estimating at the Early Stages of Cold Forging Process Design , 1993 .

[27]  Jui-Sheng Chou,et al.  Predicting the development cost of TFT-LCD manufacturing equipment with artificial intelligence models , 2010 .

[28]  M. S. Parvez,et al.  Integrated manufacturing features and Design-for-manufacture guidelines for reducing product cost under CAD/CAM environment , 2013, Comput. Ind. Eng..

[29]  Karl T. Ulrich,et al.  Product Design and Development , 1995 .

[30]  S. R. S. Kalpakjian.  Manufacturing Processes for Engineering Materials , 1984 .

[31]  W. A. Knight.  Simplified early cost estimating for hot-forged parts , 1992 .

[32]  M. Bibby,et al.  Principles of metal manufacturing processes , 1999 .

[33]  Alain Bernard,et al.  Proposal for tool-based method of product cost estimation during conceptual design , 2008 .

[34]  Volodymyr Kukhar,et al.  The Selection of Options for Closed-Die Forging of Complex Parts Using Computer Simulation by the Criteria of Material Savings and Minimum Forging Force , 2019, Advances in Intelligent Systems and Computing.

[35]  Dirk Cattrysse,et al.  Cost estimation for sheet metal parts using multiple regression and artificial neural networks: A case study , 2008 .

[36]  Michele Germani,et al.  MANUFACTURING COST ESTIMATION DURING EARLY PHASES OF MACHINE DESIGN , 2011 .

[37]  François Vernadat,et al.  Cost estimation in mechanical production: The Cost Entity approach applied to integrated product engineering , 2006 .

[38]  Ángel García-Crespo,et al.  A review of conventional and knowledge based systems for machining price quotation , 2011, J. Intell. Manuf..

[39]  S. K. Biswas,et al.  Towards an integrated design and production system for hot forging dies , 1976 .

[40]  G. Boothroyd,et al.  Estimating the Cost of Machined Components During the Conceptual Design of a Product , 1989 .

[41]  J. Sińczak,et al.  Studies of the quality and cost-effectiveness of a novel concept of open-die forged powerplant main shaft , 2015 .

[42]  Jian S. Dai,et al.  Product Cost Estimation: Technique Classification and Methodology Review , 2006 .