Reactive wetting, evolution of interfacial and bulk IMCs and their effect on mechanical properties of eutectic Sn-Cu solder alloy.

Lead free solders are increasingly being used in electronic applications. Eutectic Sn-Cu solder alloy is one of the most favored lead free alloys used for soldering in electronic applications. It is inexpensive and principally used in wave soldering. Wetting of liquid solder on a substrate is a case of reactive wetting and is accompanied by the formation of intermetallic compounds (IMCs) at the interface. Wettability of Sn-0.7Cu solder on metallic substrates is significantly affected by the temperature and the type of flux. The wettability and microstructural evolution of IMCs at the Sn-0.7Cu solder/substrate interfaces are reviewed in the present paper. The reliability of solder joints in electronic packaging is controlled by the type and morphology of interfacial IMCs formed between Sn-0.7Cu solder and substrates. The formation and growth mechanisms of interfacial IMCs are highlighted. Mechanical behavior of bulk solder alloy and solder joint interfaces are analyzed. The characteristics of the IMCs which have marked effect on the mechanical properties and fracture behavior as well as reliability of solder joints of the alloy are discussed. An attempt has also been made to discuss the effect of cooling rate and strain rate on shear strength, tensile properties and creep resistance of the solder alloy. It is recommended that future work should focus on evolving a standard procedure involving sequential assessment of wetting behavior, evolution of IMCs and mechanical properties.

[1]  R. Shalaby,et al.  Effect of rapid solidification and small additions of Zn and Bi on the structure and properties of Sn-Cu eutectic alloy , 2005 .

[2]  J. Glazer.  Microstructure and mechanical properties of Pb-free solder alloys for low-cost electronic assembly: A review , 1994 .

[3]  R. S. Sidhu,et al.  Microstructure Characterization and Creep Behavior of Pb-Free Sn-Rich Solder Alloys: Part II. Creep Behavior of Bulk Solder and Solder/Copper Joints , 2008 .

[4]  M. Abtew,et al.  Lead-free Solders in Microelectronics , 2000 .

[5]  Won Kyoung Choi,et al.  Effects of mechanical deformation and annealing on the microstructure and hardness of Pb-free solders , 2003 .

[6]  P. Vianco,et al.  Dissolution and interface reactions between the 95.5Sn-3.9Ag-0.6Cu, 99.3Sn-0.7Cu, and 63Sn-37Pb solders on silver base metal , 2006 .

[7]  J. W. Morris,et al.  The creep properties of lead-free solder joints , 2002 .

[8]  K. Prabhu,et al.  Effect of thermal contact heat transfer on solidification of Pb–Sn and Pb-free solders , 2007 .

[9]  W. J. Plumbridge,et al.  Tin pest in Sn-0.5 wt.% Cu lead-free solder , 2001 .

[10]  Y. C. Chan,et al.  Comparative study of wetting behavior and mechanical properties (microhardness) of Sn-Zn and Sn-Pb solders , 2006, Microelectron. J..

[11]  B. Chiou,et al.  The effect of substrate surface roughness on the wettability of Sn-Bi solders , 2000 .

[12]  Sinn-wen Chen,et al.  Phase transformation and microstructural evolution in solder joints , 2007 .

[13]  V. L. Acoff,et al.  Contact angle measurements of Sn-Ag and Sn-Cu lead-free solders on copper substrates , 2004 .

[14]  Weiqun Peng,et al.  An investigation of Sn pest in pure Sn and Sn-based solders , 2009, Microelectron. Reliab..

[15]  Hyuck Mo Lee,et al.  The evolution of microstructure and microhardness of Sn-Ag and Sn-Cu solders during high temperature aging , 2009, Microelectron. Reliab..

[16]  D. P. Sekulic,et al.  Spreading Kinetics of Liquid Solders over an Intermetallic Solid Surface. Part 2: Lead-Free Solders , 2009 .

[17]  Meng Liu,et al.  Tin Whisker Growth on the Surface of Sn-0.7Cu Lead-Free Solder with a Rare Earth (Nd) Addition , 2009 .

[18]  Manoj Gupta,et al.  Effect of Amount of Cu on the Intermetallic Layer Thickness Between Sn-Cu Solders and Cu Substrates , 2009 .

[19]  T. Takemoto,et al.  Transformation of Sn–Cu alloy from white tin to gray tin , 2002 .

[20]  Xu Chen,et al.  Effect of Strain Rate and Temperature on the Tensile Properties of Tin-Based Lead-Free Solder Alloys , 2008 .

[21]  T. Bieler,et al.  The orientation imaging microscopy of lead-free Sn-Ag solder joints , 2005 .

[22]  Mgd Marc Geers,et al.  Fatigue damage modeling in solder interconnects using a cohesive zone approach , 2005 .

[23]  Hsiu-yu Chang,et al.  Determination of reactive wetting properties of Sn, Sn–Cu, Sn–Ag, and Sn–Pb alloys using a wetting balance technique , 2003 .

[24]  K. Prabhu,et al.  Review of non-reactive and reactive wetting of liquids on surfaces. , 2007, Advances in colloid and interface science.

[25]  K. Prabhu,et al.  Determination of Spread Activation Energy and Assessment of Wetting Behavior of Solders on Metallic Substrates , 2010 .

[26]  N. Tamura,et al.  Preferred orientation relationship between Cu6Sn5 scallop-type grains and Cu substrate in reactions between molten Sn-based solders and Cu , 2007, Journal of Applied Physics.

[27]  Chris Bailey,et al.  Effect of adding 0.3 wt% Ni into the Sn–0.7 wt%Cu solder: Part I: Wetting behavior on Cu and Ni substrates , 2007 .

[28]  Jun Shen,et al.  Formation of bulk Cu6Sn5 intermetallic compounds in Sn–Cu lead-free solders during solidification , 2007 .

[29]  Dae-Gon Kim,et al.  Reliability investigation and interfacial reaction of ball-grid-array packages using the lead-free Sn-Cu solder , 2004 .

[30]  Sung K. Kang,et al.  Interfacial Reactions and Microstructures of Sn-0.7Cu-xZn Solders with Ni-P UBM During Thermal Aging , 2009 .

[31]  Sung K. Kang.  Development of lead (Pb)-free interconnection materials for microelectronics , 1999 .

[32]  Seung-Boo Jung,et al.  Interfacial reaction and mechanical properties of eutectic Sn–0.7Cu/Ni BGA solder joints during isothermal long-term aging , 2005 .

[33]  R. Vinci,et al.  Measuring the mechanical properties of Pb-free solder and Sn-based intermetallics by nanoindentation , 2003 .

[34]  B. Meagher,et al.  Compound growth in platinum/tin-lead solder diffusion couples , 1996 .

[35]  T. Siegmund,et al.  An irreversible cohesive zone model for interface fatigue crack growth simulation , 2003 .

[36]  C. L. Wu,et al.  Creep resistance of tin-based lead-free solder alloys , 2005 .

[37]  Effect of cooling rate on microstructure and shear strength of pure Sn, Sn-0.7Cu, Sn-3.5Ag, and Sn-37Pb solders , 2004 .

[38]  K. Bae,et al.  Microstructure and adhesion properties of Sn-0.7Cu/Cu solder joints , 2002 .

[39]  Adrian Stern,et al.  Nanoindentation measurements and mechanical testing of as-soldered and aged Sn–0.7Cu lead-free miniature joints , 2010 .

[40]  I. Goryacheva,et al.  4068 - COHESIVE ZONES FOR FATIGUE DAMAGE IN SOLDER JOINTS , 2013 .

[41]  K. Prabhu,et al.  Wetting Behavior of Solders , 2010 .

[42]  E. Bastow.  Five solder families and how they work , 2003 .

[43]  D. P. Sekulic,et al.  A Comparative Study of Reactive Wetting of Lead and Lead-Free Solders on Cu and (Cu6Sn5/Cu3Sn)/Cu Substrates , 2008 .

[44]  C. Dong,et al.  The liquid structure of Sn-based lead-free solders and the correlative effect in liquid-solid interfacial reaction , 2008 .

[45]  Da-Yuan Shih,et al.  An Investigation of Microstructure and Microhardness of Sn-Cu and Sn-Ag Solders as Functions of Alloy Composition and Cooling Rate , 2009 .

[46]  Seung-Boo Jung,et al.  High temperature reliability and interfacial reaction of eutectic Sn-0.7Cu/Ni solder joints during isothermal aging , 2006, Microelectron. Reliab..

[47]  K. Tu,et al.  Size distribution and morphology of Cu6Sn5 scallops in wetting reaction between molten solder and copper , 2008 .

[48]  Hyuck-Mo Lee,et al.  Wetting Properties and Interfacial Reactions of Mechanically Alloyed Cu5Zn8-Bearing Pb-Free Solders on a Copper Substrate , 2009 .

[49]  D. R. Frear,et al.  Interfacial fracture toughness of Pb-free solders , 2009, Microelectron. Reliab..

[50]  Xin Ma,et al.  Study on reactive wetting of Sn0.7Cu-xZn lead-free solders on Cu substrate , 2005, 2005 6th International Conference on Electronic Packaging Technology.

[51]  V. L. Acoff,et al.  Effect of flux on the wetting characteristics of SnAg, SnCu, SnAgBi, and SnAgCu lead-free solders on copper substrates , 2006 .

[52]  K. Nogita,et al.  Cracking and phase stability in reaction layers between Sn-Cu-Ni solders and Cu substrates , 2009 .

[53]  F. Zu,et al.  Effect of liquid-liquid structure transition on solidification and wettability of Sn-0.7Cu solder , 2010 .

[54]  J. Foley,et al.  Analysis of ring and plug shear strengths for comparison of lead-free solders , 2000 .

[55]  Timm Weitkamp,et al.  Time Resolved X-Ray Imaging of Dendritic Growth in Binary Alloys , 1999 .

[56]  D. Frear,et al.  Pb-free solders for flip-chip interconnects , 2001 .

[57]  W. Engelmaier,et al.  The Microstructural Aspect of the Ductile-to-Brittle Transition of Tin-Based Lead-Free Solders , 2010 .

[58]  Young-Ho Kim,et al.  Sn-Ag-Cu and Sn-Cu solders: Interfacial reactions with platinum , 2004 .

[59]  Xinfa Chen,et al.  A new unified constitutive model with short- and long-range back stress for lead-free solders of Sn―3Ag―0.5Cu and Sn―0.7Cu , 2009 .

[60]  Kuan-Chih Huang,et al.  Study of Interfacial Reactions Between Sn(Cu) Solders and Ni-Co Alloy Layers , 2010 .

[61]  S. Wang,et al.  Electromigration studies on Sn(Cu) alloy lines , 2003, Proceedings. International Symposium on Advanced Packaging Materials: Processes, Properties and Interfaces, 2005..

[62]  Ning Zhao,et al.  Viscosity and Surface Tension of Liquid Sn-Cu Lead-Free Solders , 2009 .

[63]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[64]  D. P. Sekulic,et al.  Wetting Kinetics of Eutectic Lead and Lead-Free Solders: Spreading over the Cu Surface , 2009 .

[65]  J. W. Morris,et al.  The effect of Cu6Sn5 whisker precipitates in bulk 60sn-40pb solder , 1987 .

[66]  Yu-Lin Shen,et al.  Effects of Grain Boundary Sliding on Microstructural Evolution and Damage Accumulation in Tin-Lead Alloy , 2004 .

[67]  K. Nogi,et al.  Wetting in Soldering and Microelectronics , 2008 .

[68]  Jennie S. Hwang.  Implementing Lead-Free Electronics , 2004 .

[69]  R. Chukka,et al.  A novel method of reducing melting temperatures in SnAg and SnCu solder alloys , 2011 .

[70]  Manoj Gupta,et al.  Using Microwave-Assisted Powder Metallurgy Route and Nano-size Reinforcements to Develop High-Strength Solder Composites , 2010 .

[71]  Da-Yuan Shih,et al.  Microstructure and mechanical properties of lead-free solders and solder joints used in microelectronic applications , 2005, IBM J. Res. Dev..

[72]  H. Reichl,et al.  Morphology and growth kinetics of intermetallic compounds in solid-state interfacial reaction of electroless Ni-P with Sn-based lead-free solders , 2006 .

[73]  K. Prabhu,et al.  Wetting Behaviour and Evolution of Microstructure of Sn-Ag-Zn Solders on Copper Substrates with Different Surface Textures , 2010 .

[74]  R. Fournelle,et al.  Intermetallic growth kinetics for Sn-Ag, Sn-Cu, and Sn-Ag-Cu lead-free solders on Cu, Ni, and Fe-42Ni substrates , 2006 .