High-Q Three-Dimensional Microfabricated Magnetic-Core Toroidal Inductors for Power Supplies in Package

The integration of power inductors is a roadblock in realizing highly miniaturized power supply in package (PSiP) and power supply on chip. Inductors in such power systems are used for energy storage and filtering, but they dominate in size and loss. This paper presents a novel three-dimensional in-silicon through-silicon via (TSV) magnetic-core toroidal inductor for PSiP. The magnetic powder based core is embedded into a TSV air-core inductor using a casting method. The unique air-core inductor design with a hollow core and suspended windings enables a complete core filling with microscale magnetic powders. The proposed casting method is simple, scalable, and generic for a wide range of magnetic powders. TSV magnetic-core inductors are fabricated in a compact size of 2.4 mm × 2.4 mm × 0.28 mm with the core content varying from 63 to 88 wt% of soft ferrite NiZn powders. The TSV magnetic-core toroidal inductors are fabricated and electrically characterized. Small-signal measurements show a threefold higher inductance of 112 nH and a 30% higher quality factor of 14.3 at 12.5 MHz for magnetic-core inductors compared with similar TSV air-core inductors. The small-signal measurement results are verified by the modeled results. The total core loss is characterized by large-signal measurements. A suitable inductor is implemented in a 12-MHz buck converter that operates in a zero-voltage-switching mode. The converter achieves a peak efficiency of 71.6% and an output power of 2.4 W while converting 12 to 5 Vdc.

[1]  Jizheng Qiu,et al.  Radial-anisotropy nanogranular thin-film magnetic material for toroidal inductors , 2012, 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[2]  C. W. Tipton,et al.  High-Density Nanocrystalline Core Transformer for High-Power High-Frequency Resonant Converter , 2008, IEEE Transactions on Industry Applications.

[3]  Victor Farm-Guoo Tseng,et al.  A High-Q In-Silicon Power Inductor Designed for Wafer-Level Integration of Compact DC–DC Converters , 2017, IEEE Transactions on Power Electronics.

[4]  Fred C. Lee,et al.  High-Frequency Integrated Point-of-Load Converters: Overview , 2013, IEEE Transactions on Power Electronics.

[5]  C. Ji,et al.  Silicon-Embedding Approaches to 3-D Toroidal Inductor Fabrication , 2013, Journal of Microelectromechanical Systems.

[6]  F. Herrault,et al.  Microfabrication of toroidal inductors integrated with nanolaminated ferromagnetic metallic cores , 2013 .

[7]  George Young,et al.  Low Loss Magnetic Thin Films for Off-Line Power Conversion , 2014, IEEE Transactions on Magnetics.

[8]  A. Knott,et al.  Printed circuit board integrated toroidal radio frequency inductors , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.

[9]  Y. Miura,et al.  A planar inductor using Mn-Zn ferrite/polyimide composite thick film for low-Voltage and large-current DC-DC converter , 2005, IEEE Transactions on Magnetics.

[10]  Mark G. Allen,et al.  Microfabrication of air core power inductors with metal-encapsulated polymer vias , 2013 .

[11]  Aiman Majid Nassar,et al.  The Internet of Things - A Survey , 2018, مؤتمرات الآداب والعلوم الانسانية والطبيعية.

[12]  Charles R. Sullivan,et al.  Design of microfabricated transformers and inductors for high-frequency power conversion , 1996 .

[13]  Charles R. Sullivan,et al.  Integrating magnetics for on-chip power: Challenges and opportunities , 2009, 2009 IEEE Custom Integrated Circuits Conference.

[14]  Imrich Chlamtac,et al.  Internet of things: Vision, applications and research challenges , 2012, Ad Hoc Networks.

[15]  Chong H. Ahn,et al.  3-D microfabricated toroidal planar inductors with different magnetic core schemes for MEMS and power electronic applications , 1999 .

[16]  Jaydip Sen,et al.  Internet of Things - Applications and Challenges in Technology and Standardization , 2011 .

[17]  S.C. O'Mathuna,et al.  Analysis of Microinductor Performance in a 20-100 MHz DC/DC Converter , 2009, IEEE Transactions on Power Electronics.

[18]  R. Harjani,et al.  A High-Efficiency DC–DC Converter Using 2 nH Integrated Inductors , 2008, IEEE Journal of Solid-State Circuits.

[19]  Yong Zhou,et al.  Fabrication of ultralow-profile micromachined inductor with magnetic core material , 2005 .

[20]  P. T. Tang,et al.  Fabrication of 3D air-core MEMS inductors for very-high-frequency power conversions , 2018, Microsystems & Nanoengineering.

[21]  Xinxin Li,et al.  High-$Q$ Solenoid Inductors With a CMOS-Compatible Concave-Suspending MEMS Process , 2007, Journal of Microelectromechanical Systems.

[22]  Weidong Li,et al.  Design and Fabrication of Low-Loss Toroidal Air-Core Inductors , 2007, 2007 IEEE Power Electronics Specialists Conference.

[23]  C. O'Mathúna,et al.  Novel High-Frequency Electrical Characterization Technique for Magnetic Passive Devices , 2018, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[24]  C.R. Sullivan,et al.  Improved calculation of core loss with nonsinusoidal waveforms , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[25]  Cian O'Mathuna.  PwrSiP power supply in package power system in package , 2016, 2016 International Symposium on 3D Power Electronics Integration and Manufacturing (3D-PEIM).

[26]  Arnold Knott,et al.  Design and measurement of planar toroidal transformers for very high frequency power applications , 2012, Proceedings of The 7th International Power Electronics and Motion Control Conference.

[27]  Charles R. Sullivan,et al.  Evaluation of magnetic materials for very high frequency power applications , 2008, PESC 2008.

[28]  M. Allen,et al.  A planar micromachined spiral inductor for integrated magnetic microactuator applications , 1993 .

[29]  F. Herrault,et al.  Silicon-embedded 3D toroidal air-core inductor with through-wafer interconnect for on-chip integration , 2012, 2012 IEEE 25th International Conference on Micro Electro Mechanical Systems (MEMS).

[30]  E. Waffenschmidt,et al.  Driver Electronics for LEDs , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.

[31]  D. Boroyevich,et al.  Loss Characterization and Calculation of Nanocrystalline Cores for High-Frequency Magnetics Applications , 2007, IEEE Transactions on Power Electronics.

[32]  H. Nieminen,et al.  Microreplicated RF toroidal inductor , 2004, IEEE Transactions on Microwave Theory and Techniques.

[33]  Ningning Wang,et al.  Review of Integrated Magnetics for Power Supply on Chip (PwrSoC) , 2012, IEEE Transactions on Power Electronics.

[34]  T. O'Donnell,et al.  Magnetic-Core and Air-Core Inductors on Silicon: A Performance Comparison up to 100 MHz , 2011, IEEE Transactions on Magnetics.

[35]  A Novel Silicon-Embedded Toroidal Power Inductor With Magnetic Core , 2013, IEEE Electron Device Letters.

[36]  P. McCloskey,et al.  High frequency, single/dual phases, large AC/DC signal power characterization for two phase on-silicon coupled inductors , 2017, 2017 IEEE Applied Power Electronics Conference and Exposition (APEC).

[37]  Ziwei Ouyang,et al.  Design and implementation of high frequency buck converter using multi-layer PCB inductor , 2016, IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society.

[38]  M.G. Allen,et al.  Polymer-core conductor approaches for RF MEMS , 2005, Journal of Microelectromechanical Systems.

[39]  Wei Liang,et al.  A unified model for high-power, air-core toroidal PCB inductors , 2017, 2017 IEEE 18th Workshop on Control and Modeling for Power Electronics (COMPEL).

[40]  Wenhua Liu,et al.  Overview of Dual-Active-Bridge Isolated Bidirectional DC–DC Converter for High-Frequency-Link Power-Conversion System , 2014, IEEE Transactions on Power Electronics.

[41]  Charles R. Sullivan,et al.  A Technology Overview of the PowerChip Development Program , 2013, IEEE Transactions on Power Electronics.

[42]  Mark G. Allen,et al.  Development of magnetic materials and processing techniques applicable to integrated micromagnetic devices , 1998 .

[43]  K. Ngo,et al.  Wafer-level fabrication of high-power-density MEMS passives based on silicon molding technique , 2012, 2012 7th International Conference on Integrated Power Electronics Systems (CIPS).

[44]  Raymond Foley,et al.  Technology Roadmapping for Power Supply in Package (PSiP) and Power Supply on Chip (PwrSoC) , 2013, IEEE Transactions on Power Electronics.

[45]  K. Ngo,et al.  A Surface-Mountable Microfabricated Power Inductor in Silicon for Ultracompact Power Supplies , 2011, IEEE Transactions on Power Electronics.

[46]  S.C.O. Mathuna,et al.  Magnetics on silicon: an enabling technology for power supply on chip , 2005, IEEE Transactions on Power Electronics.

[47]  Z. John Shen,et al.  Review of Silicon Power Semiconductor Technologies for Power Supply on Chip and Power Supply in Package Applications , 2013, IEEE Transactions on Power Electronics.