Ten years of applying geomatics to construction engineering in Spain: a review
暂无分享,去创建一个
Henrique Lorenzo | Pedro Arias | Higinio González-Jorge | I. Puente | Belén Riveiro | Lucía Díaz-Vilariño | Julia Armesto | Mercedes Solla | Susana Lagüela | Carlos Caamano | Joaquín Martínez | M. E. Varela | Marcos X. Álvarez
[1] C. L. Bertram,et al. Feasibility Study for Rapid Evaluation of Airfield Pavements. , 1974 .
[2] Paulo B. Lourenço,et al. Computations on historic masonry structures , 2002 .
[3] K. P. Lam,et al. A comparative study of the IFC and gbXML informational infrastructures for data exchange in computational design support environments , 2007 .
[4] Constantinos A. Balaras,et al. Infrared thermography for building diagnostics , 2002 .
[5] Antonia Moropoulou,et al. Applications of infrared thermography for the investigation of historic structures , 2004 .
[6] Pedro Arias,et al. Terrestrial laser scanning and limit analysis of masonry arch bridges , 2011 .
[7] Robert C. Bolles,et al. Random sample consensus: a paradigm for model fitting with applications to image analysis and automated cartography , 1981, CACM.
[8] R. Livesley. Limit analysis of structures formed from rigid blocks , 1978 .
[9] Antonio Maria Garcia Tommaselli,et al. A Photogrammetric Method for Single Image Orientation and Measurement , 2005 .
[10] Pedro Arias,et al. Comparative structural analyses of masonry bridges: An application to the Cernadela Bridge , 2011 .
[11] Michael Forde,et al. Application of infrared thermography to the non-destructive testing of concrete and masonry bridges , 2003 .
[12] Paul Zarchan,et al. Fundamentals of Kalman Filtering: A Practical Approach , 2001 .
[13] Ruinian Jiang,et al. Development of a digital close-range photogrammetric bridge deflection measurement system , 2010 .
[14] Giorgio Baldinelli,et al. A quantitative methodology to evaluate thermal bridges in buildings , 2012 .
[15] Ho-Chan Kim,et al. STL file generation from measured point data by segmentation and Delaunay triangulation , 2002, Comput. Aided Des..
[16] Radovan Marjanović Kavanagh. Gyroscopes for Orientation and Inertial Navigation Systems , 2007 .
[17] Chih-Hung Chiang,et al. Defect detection of concrete structures using both infrared thermography and elastic waves , 2008 .
[18] Pedro Arias,et al. A software program for semi-automated measurement of building façades , 2010 .
[19] John Weston,et al. Strapdown Inertial Navigation Technology , 1997 .
[20] Lewis Graham,et al. Mobile Mapping Systems Overview , 2010 .
[21] Burcu Akinci,et al. Automatic Reconstruction of As-Built Building Information Models from Laser-Scanned Point Clouds: A Review of Related Techniques | NIST , 2010 .
[22] Thomas Luhmann,et al. Close Range Photogrammetry , 2007 .
[23] Norbert Pfeifer,et al. DEFORMATION ANALYSIS OF A BORED TUNNEL BY MEANS OF TERRESTRIAL LASER SCANNING , 2006 .
[24] Diego González-Aguilera,et al. A New Approach for Structural Monitoring of Large Dams with a Three-Dimensional Laser Scanner , 2008, Sensors.
[25] Henrique Lorenzo,et al. Close range radar remote sensing of concrete degradation in a textile factory floor , 2001 .
[26] T. Luhmann,et al. GEOMETRIC CALIBRATION OF THERMOGRAPHIC CAMERAS , 2013 .
[27] Pedro Arias,et al. Photogrammetric 3D modelling and mechanical analysis of masonry arches: An approach based on a discontinuous model of voussoirs , 2011 .
[28] Pedro Arias,et al. Non-contact 3D Measurement of Buildings through Close Range Photogrammetry and a Laser Distance Meter , 2011 .
[29] Henrique Lorenzo,et al. Evaluation of ancient structures by GPR (ground penetrating radar): The arch bridges of Galicia (Spain) , 2011 .
[30] Pedro Arias,et al. Automation of thermographic 3D modelling through image fusion and image matching techniques , 2011 .
[31] J. Armesto,et al. Energy efficiency studies through 3D laser scanning and thermographic technologies , 2011 .
[32] A. Galtier,et al. Local energy analysis of high-cycle fatigue using digital image correlation and infrared thermography , 2008 .
[33] Pedro Arias,et al. AUTOMATIC PROCEDURE FOR THE REGISTRATION OF THERMOGRAPHIC IMAGES WITH POINT CLOUDS , 2012 .
[34] Thomas Luhmann,et al. Close range photogrammetry for industrial applications , 2010 .
[35] Young Han Kim,et al. Detection of Simulated Defect Using IR Temperature Sensors and One Point Heating , 2008, Sensors.
[36] Pedro Arias,et al. A novel methodology for the structural assessment of stone arches based on geometric data by integration of photogrammetry and ground-penetrating radar , 2012 .
[37] Ignacio Cañas Guerrero,et al. Aplicabilidad de la termografría para la inspección de los edificios rurales: Caso de una comarca española , 2003 .
[38] Brian Okorn,et al. Methods for Automatically Modeling and Representing As-built Building Information Models , 2011 .
[39] K. Atkinson. Close Range Photogrammetry and Machine Vision , 1996 .
[40] Fernando I. Rial,et al. GPR evaluation of the Roman masonry arch bridge of Lugo (Spain) , 2011 .
[41] Kenneth R. White,et al. Close-range photogrammetry applications in bridge measurement: Literature review , 2008 .
[42] I. Jolliffe. Principal Component Analysis , 2002 .
[43] Murat Yakar,et al. Importance of digital close-range photogrammetry in documentation of cultural heritage , 2007 .
[44] Frank A. van den Heuvel,et al. 3D reconstruction from a single image using geometric constraints , 1998 .