论文信息 - Reconfigurable Voltage Mode Phase Shifter using Low Voltage Digitally Controlled CMOS CCII

Reconfigurable Voltage Mode Phase Shifter using Low Voltage Digitally Controlled CMOS CCII

The lo w voltage d igitally controlled current conveyors have been used to realize the d igitally controlled reconfigurable continuous time first order voltage mode phase shifters. Each of the realized phase shifters uses two digitally controlled current conveyers along with three passive elements. The realized phase shifters provide dig ital control to phase angle through an n-bit digital control word. The realized digitally controlled continuous time phase shifters are designed and verified using PSPICE and the results thus obtained justify the theory.

Ahmed M. Nahhas | Iqbal A. Khan

[1] I. A. Khan,et al. Simple first order all-pass section using a single CCII , 2000 .

[2] Ahmed M. Soliman,et al. Low-Voltage digitally controlled fully differential current conveyor , 2005, IEEE Transactions on Circuits and Systems I: Regular Papers.

[3] Soliman A. Mahmoud,et al. New 1.5-V CMOS second generation current conveyor based on wide range transconductor , 2006 .

[4] Soliman A. Mahmoud,et al. Fully Programmable Universal Filter with Independent Gain-omega0-Q Control Based on New digitally Programmable CMOS CCII , 2009, J. Circuits Syst. Comput..

[5] I.A. Khan,et al. First Order Current Mode Filters and Multiphase Sinusoidal Oscillators Using MOCCIIs , 2006, 2006 International Conference on Microelectronics.

[6] Iqbal A. Khan,et al. A novel impedance multiplier using low voltage digitally controlled CCII , 2011, 2011 IEEE GCC Conference and Exhibition (GCC).

[7] Gaetano Palumbo,et al. 1.5-V CMOS CCII+ with high current-driving capability , 2003 .

[8] S.A. Mahmoud,et al. Low Voltage Digitally Programmable Band-Pass Filter with Independent Control , 2007, 2007 IEEE International Conference on Signal Processing and Communications.