Impedance spectroscopy as a probe for the degradation of organic light-emitting diodes

Impedance spectroscopy is a powerful method for characterizing the electrical properties of materials and their interfaces. In this study we use capacitance measurements to investigate the degradation of electrically aged bottom-emitting organic light-emitting diodes with different polymeric hole injection layers. The devices comprise a heterojunction between a hole transporting triphenyl-diamine and an electron transporting and green emitting aluminum chelate complex [Alq3, tris-(8-hydroxyquinoline) aluminum]. A detailed analysis of the capacitance as function of frequency and dc bias yields information about trapped and interfacial charges as well as the dynamics of injected charges. We find that the loss of luminance and the increase in drive voltage of stressed devices is accompanied by a deterioration of hole injection and the formation of positively charged quenching centers at or close to the organic heterojunction. Using a new polymeric hole injection layer leads to improved device stability.

[1]  Recoverable degradation and internal field forming process accompanied by the orientation of dipoles in organic light emitting diodes , 2000 .

[2]  Wolfgang Brütting,et al.  Device physics of organic light-emitting diodes based on molecular materials , 2001 .

[3]  D. L. Thomsen,et al.  A chemical failure mechanism for aluminum(III) 8-hydroxyquinoline light-emitting devices , 1996 .

[4]  Stefan Nowy,et al.  Impedance spectroscopy of organic hetero-layer OLEDs as a probe for charge carrier injection and device degradation , 2009, Organic Photonics + Electronics.

[5]  Siegfried Karg,et al.  Light-emitting diodes based on poly-p-phenylene-vinylene: II. Impedance spectroscopy , 1997 .

[6]  Stefan Nowy,et al.  The diamond/aqueous electrolyte interface: an impedance investigation. , 2008, Langmuir : the ACS journal of surfaces and colloids.

[7]  R. Coehoorn,et al.  Determination of injection barriers in organic semiconductor devices from capacitance measurements. , 2008, Physical review letters.

[8]  H.C.F. Martens,et al.  Frequency-dependent electrical response of holes in poly(p- phenylene vinylene) , 1999 .

[9]  Markus Schwoerer,et al.  Temperature dependent broadband impedance spectroscopy on poly-(p-phenylene-vinylene) light-emitting diodes , 1998 .

[10]  W. Brütting,et al.  Interfacial charges and electric field distribution in organic hetero-layer light-emitting devices , 2000 .

[11]  Denis Y. Kondakov,et al.  Role of chemical reactions of arylamine hole transport materials in operational degradation of organic light-emitting diodes , 2008 .

[12]  William C. Lenhart,et al.  Operational degradation of organic light-emitting diodes: Mechanism and identification of chemical products , 2007 .

[13]  N. Koch,et al.  Electrode-molecular semiconductor contacts: Work-function-dependent hole injection barriers versus Fermi-level pinning , 2006 .

[14]  D. Bradley,et al.  Deep level transient spectroscopy (DLTS) of a poly(p-phenylene vinylene) Schottky diode , 2000 .

[15]  D. Zou,et al.  Recoverable degradation phenomena of quantum efficiency in organic EL devices , 2000 .

[16]  Walter Riess,et al.  Influence of trapped and interfacial charges in organic multilayer light-emitting devices , 2001 .

[17]  D. Kondakov,et al.  Studies of the degradation mechanism of organic light-emitting diodes based on tris(8-quinolinolate)aluminum Alq and 2-tert-butyl-9,10-di(2-naphthyl)anthracene TBADN , 2009 .

[18]  A. Miura,et al.  Carrier Injection Characteristics of Organic Electroluminescent Devices , 1994 .

[19]  Shui-Tong Lee,et al.  Metal diffusion from electrodes in organic light-emitting diodes , 1999 .

[20]  H. Gomes,et al.  Electrical characterization of the rectifying contact between aluminium and electrodeposited poly(3-methylthiophene) , 1995 .

[21]  Xu,et al.  Degradation mechanism of small molecule-based organic light-emitting devices , 1999, Science.

[22]  Ching Wan Tang,et al.  Nonradiative recombination centers and electrical aging of organic light-emitting diodes: Direct connection between accumulation of trapped charge and luminance loss , 2003 .

[23]  J. C. Scott,et al.  Degradation and failure of MEH‐PPV light‐emitting diodes , 1996 .

[24]  Yuya Tanaka,et al.  Threshold voltage shift and formation of charge traps induced by light irradiation during the fabrication of organic light-emitting diodes , 2008 .

[25]  N. S. Sariciftci,et al.  Negative capacitance in organic semiconductor devices: Bipolar injection and charge recombination mechanism , 2007, 0706.3933.

[26]  Z. Popović,et al.  Improving the stability of organic light-emitting devices by using a hole-injection-tunable-anode-buffer-layer , 2007 .

[27]  Hany Aziz,et al.  Simultaneous electroluminescence and photoluminescence aging studies of tris(8-hydroxyquinoline) aluminum-based organic light-emitting devices , 2001 .

[28]  Wolfgang Brütting,et al.  Dispersive electron transport in tris(8-hydroxyquinoline) aluminum (Alq3) probed by impedance spectroscopy. , 2002, Physical review letters.