Sustainable design using multiobjective optimization of high-strength concrete I-beams

Sustainable designs require long-term environmental vision. To this end, this study proposes a methodology to design reinforced concrete I-beams based on multiobjective optimization techniques. The objective functions are the economic cost, the CO2 emissions, the service life, and the overall safety coefficient. The procedure was applied to a simply supported concrete I-beam including several high-strength concrete mix compositions. The solution of this 15 m beam was defined by a total of 20 variables. Results indicate that highstrength concrete is used for long-term solutions. Further, the economic feasibility of low-carbon structures remaining in service for long periods and ensuring safety is proven. This methodology is widely applicable to different structure designs and therefore, gives engineers a worthy guide to enhance the sustainability of their designs.

[1]  P. Börjesson,et al.  Greenhouse gas balances in building construction : wood versus concrete from life-cycle and forest land-use perspectives , 2000 .

[2]  John Elkington,et al.  Partnerships from cannibals with forks: The triple bottom line of 21st‐century business , 1998 .

[3]  Victor Yepes,et al.  Design of reinforced concrete bridge frames by heuristic optimization , 2008, Adv. Eng. Softw..

[4]  Julián Alcalá,et al.  Design of tall bridge piers by ant colony optimization , 2011 .

[5]  Victor Yepes,et al.  Design of reinforced concrete road vaults by heuristic optimization , 2011, Adv. Eng. Softw..

[6]  Justo Garcia Navarro,et al.  Assessment of the decrease of CO2 emissions in the construction field through the selection of materials: Practical case study of three houses of low environmental impact , 2006 .

[7]  Ran Tao,et al.  Optimizing cost and CO2 emission for construction projects using particle swarm optimization , 2013 .

[8]  Charles V. Camp,et al.  CO2 and cost optimization of reinforced concrete frames using a big bang-big crunch algorithm , 2013 .

[9]  V. K. Koumousis,et al.  Genetic Algorithms in Optimal Detailed Design of Reinforced Concrete Members , 1998 .

[10]  Víctor Yepes,et al.  CO2-Optimization Design of Reinforced Concrete Retaining Walls Based on a VNS-Threshold Acceptance Strategy , 2012, J. Comput. Civ. Eng..

[11]  Julian Alcala,et al.  Life cycle greenhouse gas emissions of blended cement concrete including carbonation and durability , 2013, The International Journal of Life Cycle Assessment.

[12]  Julián Alcalá,et al.  Design of prestressed concrete precast road bridges with hybrid simulated annealing , 2013 .

[13]  C. D. Gelatt,et al.  Optimization by Simulated Annealing , 1983, Science.

[14]  Víctor Yepes,et al.  A parametric study of optimum earth-retaining walls by simulated annealing , 2008 .

[15]  Víctor Yepes,et al.  Memetic Algorithm Approach to Designing Precast-Prestressed Concrete Road Bridges with Steel Fiber Reinforcement , 2015 .

[16]  Victor Yepes,et al.  Multiobjective Optimization of Concrete Frames by Simulated Annealing , 2008, Comput. Aided Civ. Infrastructure Eng..

[17]  A C Smith,et al.  Corrosion of steel in concrete , 1982 .

[18]  S. Al-Athel,et al.  Report of the World Commission on Environment and Development: "Our Common Future" , 1987 .

[19]  Víctor Yepes,et al.  Multi-objective optimization design of bridge piers with hybrid heuristic algorithms , 2012 .

[20]  J. Medina,et al.  Estimation of Incident and Reflected Waves Using Simulated Annealing , 2001 .

[21]  B. Lagerblad.  Carbon Dioxide Uptake during Concrete Life Cycle - State of the Art , 2005 .

[22]  Francis Gerard Collins,et al.  Inclusion of carbonation during the life cycle of built and recycled concrete: influence on their carbon footprint , 2010 .