Cement augmentation of lag screws: an investigation on biomechanical advantages

[1]  M. Windolf,et al.  Ex vivo evaluation of the polymerization temperatures during cement augmentation of proximal femoral nail antirotation blades , 2012, The journal of trauma and acute care surgery.

[2]  R. G. Richards,et al.  Potential of polymethylmethacrylate cement-augmented helical proximal femoral nail antirotation blades to improve implant stability—A biomechanical investigation in human cadaveric femoral heads , 2012, The journal of trauma and acute care surgery.

[3]  S. Boonen,et al.  Biomechanical evaluation of bone-cement augmented Proximal Femoral Nail Antirotation blades in a polyurethane foam model with low density. , 2012, Clinical biomechanics.

[4]  G. Hofmann,et al.  Development of a technique for cement augmentation of nailed tibiotalocalcaneal arthrodesis constructs. , 2010, Clinical biomechanics.

[5]  C. Niu,et al.  Pullout strength for cannulated pedicle screws with bone cement augmentation in severely osteoporotic bone: influences of radial hole and pilot hole tapping. , 2009, Clinical biomechanics.

[6]  Thomas Mendel,et al.  Temperature evaluation during PMMA screw augmentation in osteoporotic bone--an in vitro study about the risk of thermal necrosis in human femoral heads. , 2009, Journal of Biomedical Materials Research. Part B - Applied biomaterials.

[7]  K Schwieger,et al.  Angle stable interlocking screws improve construct stability of intramedullary nailing of distal tibia fractures: a biomechanical study. , 2009, Injury.

[8]  Douglas L Burton,et al.  Cement Augmentation of Pedicle Screw Fixation Using Novel Cannulated Cement Insertion Device , 2009, Spine.

[9]  R. Zdero,et al.  The effect of screw pullout rate on screw purchase in synthetic cancellous bone. , 2009, Journal of biomechanical engineering.

[10]  T. Keller,et al.  Mechanical properties of open-cell foam synthetic thoracic vertebrae , 2008, Journal of materials science. Materials in medicine.

[11]  M. Kuster,et al.  A new technique for cement augmentation of the sliding hip screw in proximal femur fractures. , 2008, Clinical biomechanics.

[12]  W. Mayr,et al.  Interfragmentary compression forces of scaphoid screws in a sawbone cylinder model. , 2007, Injury.

[13]  C. Collinge,et al.  Mechanical Evaluation of Fracture Fixation Augmented With Tricalcium Phosphate Bone Cement in a Porous Osteoporotic Cancellous Bone Model , 2007, Journal of orthopaedic trauma.

[14]  G. Beaupré,et al.  Comparison of initial compression force across the subtalar joint by two different screw fixation techniques. , 2006, The Journal of foot and ankle surgery : official publication of the American College of Foot and Ankle Surgeons.

[15]  M. Zlowodzki,et al.  Biomechanical evaluation of the less invasive stabilization system and the 95-degree angled blade plate for the internal fixation of distal femur Fractures in human cadaveric bones with high bone mineral density. , 2006, The Journal of trauma.

[16]  N. Suhm,et al.  Fixation principles in metaphyseal bone—a patent based review , 2005, Osteoporosis International.

[17]  B. Rahn,et al.  Mechanical characterisation of a bone defect model filled with ceramic cements , 2004, Journal of materials science. Materials in medicine.

[18]  G. Bergmann,et al.  Material properties of femoral cancellous bone in axial loading , 2004, Archives of orthopaedic and traumatic surgery.

[19]  B. Nigg,et al.  Influence of Screw Type on Obtained Contact Area and Contact Force in a Cadaveric Subtalar Arthrodesis Model , 2002, Foot & ankle international.

[20]  I. Lo,et al.  A Biomechanical Analysis of Intrascaphoid Compression Using the 3.00 mm Synthes Cannulated Screw and Threaded Washer: an in vitro Cadaveric Study , 2001, Journal of hand surgery.

[21]  E. Benzel,et al.  Effects of hole preparation on screw pullout resistance and insertional torque: a biomechanical study. , 2001, Journal of neurosurgery.

[22]  H. Yoshikawa,et al.  Augmentation of cancellous screw fixation with hydroxyapatite composite resin (CAP) in vivo. , 2000, Journal of biomedical materials research.

[23]  S. Mcloughlin,et al.  Biomechanical Assessment of Compression Screws , 1998, Clinical orthopaedics and related research.

[24]  C. Flahiff,et al.  Pullout strength of fixation screws from polymethylmethacrylate bone cement. , 1995, Biomaterials.

[25]  E Y Chao,et al.  Bone-healing patterns affected by loading, fracture fragment stability, fracture type, and fracture site compression. , 1993, Clinical orthopaedics and related research.

[26]  S. P. Chow,et al.  Long-term results and complications of cement augmentation in the treatment of unstable trochanteric fractures. , 1989, Injury.