Comparison of power control method for B4 converter connected to unbalanced grid

The aim of the paper is to present a power control of a three-phase inverter with only four inverter legs (connections B4) connected to an unbalanced grid. The results obtained by the predictive power control with a finite set of control values, the results obtained using a modified direct power control strategy, and the results obtained using a generalized predictive control are compared and discussed.

[1]  Marco Liserre,et al.  Grid Converters for Photovoltaic and Wind Power Systems , 2011 .

[2]  Sanjib Kumar Panda,et al.  Application of Four-Switch-Based Three-Phase Grid-Connected Inverter to Connect Renewable Energy Source to a Generalized Unbalanced Microgrid System , 2013, IEEE Transactions on Industrial Electronics.

[3]  Yongchang Zhang,et al.  Model Predictive Direct Power Control of PWM Rectifiers Under Unbalanced Network Conditions , 2015, IEEE Transactions on Industrial Electronics.

[4]  Josef Tlustý,et al.  Contribution to control strategies for converter connected to unbalanced grid , 2016, 2016 7th International Conference on Sciences of Electronics, Technologies of Information and Telecommunications (SETIT).

[5]  Peter Sergeant,et al.  Adding inverter fault detection to model-based predictive control for flying-capacitor inverters , 2013, 2013 IEEE International Symposium on Sensorless Control for Electrical Drives and Predictive Control of Electrical Drives and Power Electronics (SLED/PRECEDE).

[6]  T.A. Lipo,et al.  A control scheme of improved transient response for PWM AC/DC converter under generalized unbalanced operating conditions , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[7]  David W. Clarke,et al.  Generalized predictive control - Part I. The basic algorithm , 1987, Autom..