Assessment of compressive strength of historic masonry using non-destructive and destructive techniques
暂无分享,去创建一个
Milan Holický | Miroslav Sýkora | Jana Marková | Dimitris Diamantidis | Árpád Rózsás | M. Sýkora | D. Diamantidis | M. Holicky | J. Marková | Á. Rózsás
[1] H. Gulvanessian,et al. EN1990 Eurocode—Basis of structural design , 2001 .
[2] Omar AlShawa,et al. Static penetration test for historical masonry mortar , 2016 .
[3] C. Dymiotis,et al. ALLOWING FOR UNCERTAINTIES IN THE MODELLING OF MASONRY COMPRESSIVE STRENGTH , 2002 .
[4] D. Breysse,et al. Nondestructive evaluation of concrete strength: An historical review and a new perspective by combining NDT methods , 2012 .
[5] N. Gucci,et al. A non-destructive technique for the determination of mortar load capacityin situ , 1995 .
[6] C. Adam,et al. Numerical modeling of the in-plane behavior of historical brick masonry walls , 2011 .
[7] Raffaele Pucinotti,et al. Reinforced concrete structure: Non destructive in situ strength assessment of concrete , 2015 .
[8] Bernard Rosner,et al. On the Detection of Many Outliers , 1975 .
[10] L. Binda,et al. Strategies for the assessment of historic masonry structures , 2005 .
[11] Milan Holický,et al. Assessment of compressive strength of historic mixed masonry , 2015 .
[12] Martine Wevers,et al. Crack monitoring in historical masonry with distributed strain and acoustic emission sensing techniques , 2018 .
[13] Denys Breysse,et al. Non-destructive strength evaluation of concrete: Analysis of some key factors using synthetic simulations , 2015 .
[14] Milan Holický,et al. Assessment of model uncertainties for structural resistance , 2016 .
[15] Valerio Pfister,et al. Evaluation of concrete strength by means of ultrasonic waves: A method for the selection of coring position , 2014 .
[16] S. Kahraman. Evaluation of simple methods for assessing the uniaxial compressive strength of rock , 2001 .
[17] Michael Havbro Faber,et al. Probabilistic Assessment of Masonry Compressive Strength , 2009 .
[18] Wilson H. Tang,et al. Probability Concepts in Engineering: Emphasis on Applications to Civil and Environmental Engineering , 2006 .
[19] Antonella Saisi,et al. Investigation strategies for the diagnosis of historic structures: on-site tests on Avio Castle, Italy, and Pišece Castle, Slovenia , 2008 .
[20] A. Sabha,et al. Assessment Of The Loadbearing Capacity Of Historic Masonry , 1970 .
[21] Miroslav Sýkora,et al. Evaluation of Compressive Strength of Historic Masonry Using Measurements , 2014 .
[22] Angela Calia,et al. Assessing the reliability of non-destructive and moderately invasive techniques for the evaluation of uniaxial compressive strength of stone masonry units , 2016 .
[23] Miroslav Sykora,et al. Probabilistic model for compressive strength of historic masonry , 2013 .
[24] Denys Breysse,et al. Combining non-invasive techniques for reliable prediction of soft stone strength in historic masonries , 2017 .
[25] Daniel Straub,et al. Value of information: A roadmap to quantifying the benefit of structural health monitoring , 2017 .
[26] Denys Breysse,et al. Using Monte-Carlo simulations to evaluate the efficiency of different strategies for nondestructive assessment of concrete strength , 2016 .
[27] Miroslav Sykora,et al. Structural Assessment Of Heritage Buildings , 2012 .
[28] Nebojša Mojsilović,et al. Probability and structural reliability assessment of mortar joint thickness in load-bearing masonry walls , 2015 .
[29] A. Magalhães,et al. Caracterización física y mecánica de los morteros antiguos. Aplicación a la evaluación del estado de conservación , 2009 .
[30] Paulo B. Lourenço,et al. Recommendations for restoration of ancient buildings and the survival of a masonry chimney , 2006 .
[31] Miroslav Sykora,et al. Target reliability for existing structures considering economic and societal aspects , 2017, Life-Cycle of Structural Systems.
[32] Carl-Alexander Graubner,et al. Influence of material spatial variability on required safety factors for masonry walls in compression , 2017 .
[33] José C. Matos,et al. Probabilistic-based assessment of a masonry arch bridge considering inferential procedures , 2017 .
[34] Milan Holický,et al. Strength assessment of historic brick masonry , 2016 .
[35] Sebastian Thöns,et al. On the Value of Monitoring Information for the Structural Integrity and Risk Management , 2018, Comput. Aided Civ. Infrastructure Eng..
[36] Miroslav Sykora,et al. Assessment of the masonry strength of the fortress in Terezin , 2014 .
[37] Milan Holický,et al. Economic and human safety reliability levels for existing structures , 2015 .
[38] M. Stewart,et al. Spatial variability and stochastic strength prediction of unreinforced masonry walls in vertical bending , 2014 .
[39] Denys Breysse,et al. Assessing concrete strength with rebound hammer: review of key issues and ideas for more reliable conclusions , 2014 .
[40] Manicka Dhanasekar,et al. Prediction of masonry compressive behaviour using a damage mechanics inspired modelling method , 2016 .
[41] Luca Pelà,et al. Torque Penetrometric Test for the in-situ characterisation of historical mortars: fracture mechanics interpretation and experimental validation , 2017 .
[42] José C. Matos,et al. Reliability-based assessment of existing masonry arch railway bridges , 2016 .
[43] Giuseppe Lacidogna,et al. Damage Monitoring of an Historical Masonry Building by the Acoustic Emission Technique , 2005 .
[44] D. Breysse,et al. Non destructive assessment of in situ concrete strength: comparison of approaches through an international benchmark , 2017 .
[45] Miroslav Sykora,et al. Compressive strength of deteriorated historic masonry based on measurements , 2015 .
[46] F. E. Grubbs. Procedures for Detecting Outlying Observations in Samples , 1969 .
[47] Miroslav Sykora,et al. Uncertainties in resistance models for sound and corrosion-damaged RC structures according to EN 1992-1-1 , 2015 .
[48] Milan Holický,et al. Introduction to Probability and Statistics for Engineers , 2013 .
[49] Juan Luis Fernández-Martínez,et al. Erratum to: Assessing concrete strength with rebound hammer: review of key issues and ideas for more reliable conclusions , 2014 .
[50] Tomáš Čejka,et al. THE EFFECT OF DEGRADATION PROCESSES ON THE SERVICEABILITY OF BUILDING MATERIALS OF HISTORIC BUILDINGS , 2016 .
[51] Michael C. Griffith,et al. Probabilistic Analysis of Unreinforced Brick Masonry Walls Subjected to Horizontal Bending , 2017 .
[52] R. Veiga,et al. Characterisation Of Mechanical Properties OfHistoric Mortars – Testing Of Irregular Samples , 2005 .
[53] Eric Brehm. Reliability of unreinforced masonry bracing walls , 2011 .
[54] Angela Calia,et al. Ultrasonic pulse velocity for the evaluation of physical and mechanical properties of a highly porous building limestone. , 2015, Ultrasonics.
[55] Angelo Masi,et al. An experimental study on the within-member variability of in situ concrete strength in RC building structures , 2013 .
[56] Denys Breysse,et al. Factors affecting the reliability of assessing the concrete strength by rebound hammer and cores , 2017 .
[57] Xavier Romão,et al. Assessing concrete strength variability in existing structures based on the results of NDTs , 2018, Construction and Building Materials.
[58] M. Holicky,et al. Assessment Of Masonry Strength InA Heritage Building , 2009 .
[59] Paulo B. Lourenço,et al. Computations on historic masonry structures , 2002 .
[60] Jonny Henkel. Evaluation of the quality of historic brickwork / Die Ermittlung der Mauerwerksgüte von Bestandsmauerwerk aus kleinformatigen Ziegeln , 2016 .
[61] Milan Holický,et al. Physical and mechanical characteristics of building materials of historic buildings , 2017 .