A microstructural study of fault rocks from the SAFOD: Implications for the deformation mechanisms and strength of the creeping segment of the San Andreas Fault

Abstract The San Andreas Fault zone in central California accommodates tectonic strain by stable slip and microseismic activity. We study microstructural controls of strength and deformation in the fault using core samples provided by the San Andreas Fault Observatory at Depth (SAFOD) including gouge corresponding to presently active shearing intervals in the main borehole. The methods of study include high-resolution optical and electron microscopy, X-ray fluorescence mapping, X-ray powder diffraction, energy dispersive X-ray spectroscopy, white light interferometry, and image processing. The fault zone at the SAFOD site consists of a strongly deformed and foliated core zone that includes 2–3 m thick active shear zones, surrounded by less deformed rocks. Results suggest deformation and foliation of the core zone outside the active shear zones by alternating cataclasis and pressure solution mechanisms. The active shear zones, considered zones of large-scale shear localization, appear to be associated with an abundance of weak phases including smectite clays, serpentinite alteration products, and amorphous material. We suggest that deformation along the active shear zones is by a granular-type flow mechanism that involves frictional sliding of microlithons along phyllosilicate-rich Riedel shear surfaces as well as stress-driven diffusive mass transfer. The microstructural data may be interpreted to suggest that deformation in the active shear zones is strongly displacement-weakening. The fault creeps because the velocity strengthening weak gouge in the active shear zones is being sheared without strong restrengthening mechanisms such as cementation or fracture sealing. Possible mechanisms for the observed microseismicity in the creeping segment of the SAF include local high fluid pressure build-ups, hard asperity development by fracture-and-seal cycles, and stress build-up due to slip zone undulations.

[1]  F. Chester,et al.  Ultracataclasite structure and friction processes of the Punchbowl Fault , 1998 .

[2]  A. Michelini,et al.  Detailed kinematics, structure and recurrence of micro‐seismicity in the SAFOD target region , 2004 .

[3]  M. Zoback.  Earth science: Strength of the San Andreas , 2000, Nature.

[4]  J. Byerlee,et al.  Model for episodic flow of high-pressure water in fault zones before earthquakes , 1993 .

[5]  N. M. Beeler,et al.  Laboratory-Based Maximum Slip Rates in Earthquake Rupture Zones and Radiated Energy , 2010 .

[6]  G. Dresen,et al.  Amorphous material in SAFOD core samples (San Andreas Fault): Evidence for crush‐origin pseudotachylytes? , 2010 .

[7]  C. Collettini,et al.  Frictional-viscous flow, seismicity and the geology of weak faults: a review and future directions , 2008 .

[8]  C. Spiers,et al.  Fault rocks from the SAFOD core samples : implications for weakening at shallow depths along the San Andreas Fault, California , 2011 .

[9]  A. Rubin,et al.  Streaks of microearthquakes along creeping faults , 1999, Nature.

[10]  D. Houseknecht,et al.  Petrographic constraints on models of intergranular pressure solution in quartzose sandstones , 1987 .

[11]  D. Dreger,et al.  Repeating earthquake finite source models: Strong asperities revealed on the San Andreas Fault , 2007 .

[12]  P. Fulton,et al.  Potential role of mantle‐derived fluids in weakening the San Andreas Fault , 2009 .

[13]  M. Utada,et al.  Smectite-to-chlorite transformation in thermally metamorphosed volcanoclastic rocks in the Kamikita area, northern Honshu, Japan , 1991 .

[14]  H. Wenk,et al.  Preferred orientation of phyllosilicates: Comparison of fault gouge, shale and schist , 2010 .

[15]  A. Lachenbruch,et al.  Heat flow from Cajon Pass, fault strength, and tectonic implications , 1992 .

[16]  W Foxall,et al.  Clustering and Periodic Recurrence of Microearthquakes on the San Andreas Fault at Parkfield, California , 1995, Science.

[17]  M. Zoback,et al.  How faulting keeps the crust strong , 2000 .

[18]  Clifford H. Thurber,et al.  Fine‐scale structure of the San Andreas fault zone and location of the SAFOD target earthquakes , 2004 .

[19]  A. Niemeijer,et al.  Influence of phyllosilicates on fault strength in the brittle-ductile transition: insights from rock analogue experiments , 2005, Geological Society, London, Special Publications.

[20]  C. Spiers,et al.  Origin and mechanical significance of foliated cataclastic rocks in the cores of crustal-scale faults: Examples from the Median Tectonic Line, Japan , 2006 .

[21]  F. Waldhauser,et al.  Streaks, multiplets, and holes: High‐resolution spatio‐temporal behavior of Parkfield seismicity , 2004 .

[22]  Nadia Lapusta,et al.  Scaling of small repeating earthquakes explained by interaction of seismic and aseismic slip in a rate and state fault model , 2009 .

[23]  Brian Evans,et al.  Fault mechanics and transport properties of rocks : a festschrift in honor of W.F. Brace , 1992 .

[24]  Michael J. Rymer,et al.  Talc-bearing serpentinite and the creeping section of the San Andreas fault , 2007, Nature.

[25]  J. Solum,et al.  Phyllosilicate mineral assemblages of the SAFOD Pilot Hole and comparison with an exhumed segment of the San Andreas Fault System , 2004 .

[26]  James P. Evans,et al.  Mineralogic and Textural Analyses of Drill Cuttings from the San Andreas Fault Observatory at Depth (SAFOD) Boreholes: Initial Interpretations of Fault Zone Composition and Constraints on Geologic Models , 2007 .

[27]  R. Wintsch,et al.  Fluid‐rock reaction weakening of fault zones , 1995 .

[28]  E. Rutter,et al.  A Discussion on natural strain and geological structure - The kinetics of rock deformation by pressure solution , 1976, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[29]  D. Faulkner,et al.  Can the maintenance of overpressured fluids in large strike-slip fault zones explain their apparent weakness? , 2001 .

[30]  T. Tullis,et al.  Porosity and particle shape changes leading to shear localization in small-displacement faults , 2010 .

[31]  C. Peach,et al.  Diffusive properties of fluid-filled grain boundaries measured electrically during active pressure solution , 2002 .

[32]  R. Bevins,et al.  Low Grade Metamorphism , 1992 .

[33]  D. Moore,et al.  Correlation of clayey gouge in a surface exposure of serpentinite in the San Andreas Fault with gouge from the San Andreas Fault Observatory at Depth (SAFOD) , 2012 .

[34]  C. Spiers,et al.  Effect of phyllosilicates on fluid-assisted healing of gouge-bearing faults , 2000 .

[35]  T. Wong,et al.  Constraints on the stress state of the San Andreas Fault with analysis based on core and cuttings from San Andreas Fault Observatory at Depth (SAFOD) drilling phases 1 and 2 , 2010 .

[36]  Phillip G Resor,et al.  Slip heterogeneity on a corrugated fault , 2009 .

[37]  D. Faulkner,et al.  On the internal structure and mechanics of large strike-slip fault zones: field observations of the Carboneras fault in southeastern Spain , 2001 .

[38]  J. Chéry,et al.  A mechanical model of the San Andreas fault and SAFOD Pilot Hole stress measurements , 2004 .

[39]  Darcy K. McPhee,et al.  Crustal structure across the San Andreas Fault at the SAFOD site from potential field and geologic studies , 2004 .

[40]  Yehuda Ben-Zion,et al.  Characterization of Fault Zones , 2003 .

[41]  S. Hall,et al.  Comparative microstructures of natural and experimentally produced clay-bearing fault gouges , 1986 .

[42]  F. Chester,et al.  Stress and deformation along wavy frictional faults , 2000 .

[43]  A. Sagy,et al.  Geometric and rheological asperities in an exposed fault zone , 2009 .

[44]  M. Zoback,et al.  Stress orientations and magnitudes in the SAFOD pilot hole , 2004 .

[45]  W. Griffith,et al.  Rough faults, distributed weakening, and off-fault deformation , 2009 .

[46]  Robert M. Nadeau,et al.  Seismological studies at Parkfield VI: Moment release rates and estimates of source parameters for small repeating earthquakes , 1998, Bulletin of the Seismological Society of America.

[47]  L. Warr,et al.  Constraints on mineralization, fluid-rock interaction, and mass transfer during faulting at 2―3 km depth from the SAFOD drill hole , 2009 .

[48]  James P. Evans,et al.  Lithology and internal structure of the San Andreas fault at depth based on characterization of Phase 3 whole-rock core in the San Andreas Fault Observatory at Depth (SAFOD) borehole , 2011 .

[49]  T. Wong,et al.  Frictional strength of cuttings and core from SAFOD drillhole phases 1 and 2 , 2006 .

[50]  R. Knipe,et al.  Transformation- and reaction-enhanced ductility in rocks , 1978, Journal of the Geological Society.

[51]  P. Bird,et al.  Computer simulations of California tectonics confirm very low strength of major faults , 1994 .

[52]  D. Elsworth,et al.  Fabric induced weakness of tectonic faults , 2010 .

[53]  S. Hickman,et al.  Kinetics of pressure solution at halite‐silica interfaces and intergranular clay films , 1995 .

[54]  Jafar Hadizadeh,et al.  Evidence of transient increases of fluid pressure in SAFOD phase III cores , 2011 .

[55]  J. Erzinger,et al.  Origin and spatial distribution of gas at seismogenic depths of the San Andreas Fault from drill-mud gas analysis , 2008 .

[56]  Terry E. Tullis,et al.  Frictional Behavior of Large Displacement Experimental Faults , 1996 .

[57]  T. Wong,et al.  Constraints on the stress state of the San Andreas Fault with analysis based on core and cuttings from San Andreas Fault Observatory at Depth (SAFOD) drilling phases 1 and 2: STRESS STATE CONSTRAINTS ON THE SAF , 2009 .

[58]  M. Zoback,et al.  A multiscale study of the mechanisms controlling shear velocity anisotropy in the San Andreas Fault Observatory at Depth , 2006 .

[59]  D. Lockner,et al.  Talc friction in the temperature range 25°–400 °C: relevance for fault-zone weakening , 2008 .

[60]  L. Warr,et al.  On the origin of mixed-layered clay minerals from the San Andreas Fault at 2.5–3 km vertical depth (SAFOD drillhole at Parkfield, California) , 2009 .

[61]  S. Titus,et al.  Thirty-Five-Year Creep Rates for the Creeping Segment of the San Andreas Fault and the Effects of the 2004 Parkfield Earthquake: Constraints from Alignment Arrays, Continuous Global Positioning System, and Creepmeters , 2006 .

[62]  Derek Elsworth,et al.  Significant effect of grain size distribution on compaction rates in granular aggregates , 2009 .

[63]  James P. Evans,et al.  Geophysical properties within the San Andreas Fault Zone at the San Andreas Fault Observatory at Depth and their relationships to rock properties and fault zone structure , 2010 .

[64]  W. Ellsworth,et al.  Source Scaling Relationships of Microearthquakes at Parkfield, CA, Determined Using the SAFOD Pilot Hole Seismic Array , 2013 .

[65]  P. K. Weyl.  Pressure solution and the force of crystallization: a phenomenological theory , 1959 .

[66]  Colin F. Williams,et al.  Frictional strength heterogeneity and surface heat flow: Implications for the strength of the creeping San Andreas fault , 2006 .

[67]  C. Collettini,et al.  A low-angle normal fault in the Umbria region (Central Italy): a mechanical model for the related microseismicity , 2002 .

[68]  Demian M. Saffer,et al.  Weakness of the San Andreas Fault revealed by samples from the active fault zone , 2011 .

[69]  G. Dresen,et al.  Nanoscale porosity in SAFOD core samples (San Andreas Fault) , 2011 .

[70]  T. Wong,et al.  Effect of clay content and mineralogy on frictional sliding behavior of simulated gouges: Binary and ternary mixtures of quartz, illite, and montmorillonite , 2010 .

[71]  M. Zoback,et al.  Regional tectonic stress near the San Andreas fault in central and southern California , 2004 .

[72]  Mark D. Zoback,et al.  Scientific Drilling Into the San Andreas Fault Zone —An Overview of SAFOD's First Five Years , 2011 .

[73]  R. Holdsworth,et al.  High-Strain Zones: Structure and Physical Properties , 2005 .

[74]  T. Engelder,et al.  Disjunctive cleavage formed at shallow depths in sedimentary rocks , 1985 .

[75]  A. Niemeijer,et al.  Velocity dependence of strength and healing behaviour in simulated phyllosilicate-bearing fault gouge , 2006 .

[76]  Ben A. van der Pluijm,et al.  Mineralogical characterization of protolith and fault rocks from the SAFOD Main Hole , 2006 .

[77]  B. Bekins,et al.  A critical evaluation of crustal dehydration as the cause of an overpressured and weak San Andreas Fault , 2009 .

[78]  Jafar Hadizadeh,et al.  Aseismic sliding of active faults by pressure solution creep: Evidence from the San Andreas Fault Observatory at Depth , 2011 .

[79]  Michael J. Rymer,et al.  Structure of the San Andreas Fault Zone as Revealed by Surface Geologic Mapping and High-Resolution Seismic Profiling Near Parkfield, California , 2003 .

[80]  C. Marone,et al.  Clay fabric intensity in natural and artificial fault gouges: Implications for brittle fault zone processes and sedimentary basin clay fabric evolution , 2009 .

[81]  C. Collettini,et al.  Fault zone fabric and fault weakness , 2009, Nature.

[82]  S. Hickman,et al.  Low strength of deep San Andreas fault gouge from SAFOD core , 2011, Nature.