A plasticity-based model of material removal in chemical-mechanical polishing (CMP)

It is well known that the chemical reaction between an oxide layer and a water-based slurry produces a softer hydroxylated interface layer. During chemical-mechanical polishing (CMP), it is assumed that material removal occurs by the plastic deformation of this interface layer. In this paper, the behavior of the hydroxylated layer is modeled as a perfectly plastic, material, and a mechanistic model for material removal rate (MRR) in CMP is developed. The deformation profile of the soft pad is approximated as the bending of a thin elastic beam. In addition to the dependence of MRR on pressure and relative velocity, the proposed plasticity-based model is also capable of delineating the effects of pad and slurry properties. The plasticity-based model is utilized to explore the effects of various design parameters (e.g., abrasive shape, size and concentration, and pad stiffness) on the MRR. Model predictions are compared with existing experimental observations from glass polishing, lapping, and CMP.

[1]  D. Boning,et al.  Pattern Dependent Modeling for CMP Optimization and Control , 1999 .

[2]  K. Rajan.  Mechanical processes in chemical-mechanical planarization: Plasticity effects in oxide thin films , 1998 .

[3]  L. Cook.  Chemical processes in glass polishing , 1990 .

[4]  Pierre H. Woerlee,et al.  Influence of Overpolish Time on the Performance of W Damascene Technology , 1998 .

[5]  Steven Danyluk,et al.  Contact Mechanics and Lubrication Hydrodynamics of Chemical Mechanical Polishing , 1999 .

[6]  Ronald J. Gutmann,et al.  Chemical Mechanical Planarization of Microelectronic Materials , 1997 .

[7]  W. Tseng,et al.  A Comparative Study on the Roles of Velocity in the Material Removal Rate during Chemical Mechanical Polishing , 1999 .

[8]  P. A. Burke.  Semi-empirical modelling of SiO/sub 2/ chemical-mechanical polishing planarization , 1991, 1991 Proceedings Eighth International IEEE VLSI Multilevel Interconnection Conference.

[9]  S. R. Runnels,et al.  Tribology Analysis of Chemical‐Mechanical Polishing , 1994 .

[10]  F. W. Preston.  The Theory and Design of Plate Glass Polishing Machines , 1927 .

[11]  Marius K. Orlowski,et al.  A statistical polishing pad model for chemical-mechanical polishing , 1993, Proceedings of IEEE International Electron Devices Meeting.

[12]  Scott R. Runnels,et al.  Advances in physically based erosion simulators for CMP , 1996 .

[13]  Richard F. Salant,et al.  Mechanisms of chemical-mechanical polishing of SiO2 dielectric on integrated circuits© , 1998 .

[14]  Scott G. Meikle,et al.  Modeling of Chemical Mechanical Polishing Processes Using a Discretized Geometry Approach , 2000 .

[15]  Donald W. Schwendeman,et al.  Two‐Dimensional Wafer‐Scale Chemical Mechanical Planarization Models Based on Lubrication Theory and Mass Transport , 1999 .

[16]  B. Bhushan,et al.  Material removal mechanisms of single-crystal silicon on nanoscale and at ultralow loads , 1998 .

[17]  T. Cale,et al.  Von Mises Stress in Chemical‐Mechanical Polishing Processes , 1997 .

[18]  Frank G. Shi,et al.  A new theory for CMP with soft pads , 1998, Proceedings of the IEEE 1998 International Interconnect Technology Conference (Cat. No.98EX102).

[19]  S. Ramarajan,et al.  Modification of the Preston equation for the chemical-mechanical polishing of copper , 1998 .

[20]  B. Hockey.  Plastic Deformation of Aluminum Oxide by Indentation and Abrasion , 1971 .

[21]  Minoru Tomozawa.  Oxide CMP mechanisms , 1997 .

[22]  Fan Zhang,et al.  The Role of Particle Adhesion and Surface Deformation in Chemical Mechanical Polishing Processes , 1999 .

[23]  N. J. Brown.  Some speculations on the mechanisms of abrasive grinding and polishing , 1987 .

[24]  David Dornfeld,et al.  Material removal mechanism in chemical mechanical polishing: theory and modeling , 2001 .

[25]  L. Samuels,et al.  Metallographic polishing by mechanical methods , 1982 .

[26]  S. Runnels.  Feature‐Scale Fluid‐Based Erosion Modeling for Chemical‐Mechanical Polishing , 1994 .

[27]  Leon M Keer,et al.  Wear‐Contact Problems and Modeling of Chemical Mechanical Polishing , 1998 .

[28]  J. Warnock,et al.  A two-dimensional process model for chemimechanical polish planarization , 1991 .

[29]  B. Moudgil,et al.  Hydrodynamics of a Chemical-Mechanical Planarization Process , 1999 .

[30]  R. Komanduri,et al.  On chemomechanical polishing of Si3N4 with Cr2O3 , 1996 .

[31]  Marc Heyns,et al.  Modelling the influence of pad bending on the planarization performance during CMP , 1999 .

[32]  J. G. Ryan,et al.  Dual Damascene: a ULSI wiring technology , 1991, 1991 Proceedings Eighth International IEEE VLSI Multilevel Interconnection Conference.

[33]  S. Chandrasekar,et al.  Role of indentation fracture in free abrasive machining of ceramics , 1993 .

[34]  Karl K. Stevens,et al.  Statics and Strength of Materials , 1987 .

[35]  Phillip C. Baker,et al.  Optical Polishing Of Metals , 1982, Optics & Photonics.

[36]  Uday Mahajan,et al.  Effect of Particle Size during Tungsten Chemical Mechanical Polishing , 1999 .

[37]  Robert E. Parks,et al.  Rapidly Renewable Lap: Theory and Practice , 1998 .

[38]  R. Komanduri,et al.  On the Possibility of Chemo-Mechanical Action in Magnetic Float Polishing of Silicon Nitride , 1996 .

[39]  Dennis Okumu Ouma,et al.  Modeling of chemical mechanical polishing for dielectric planarization , 1998 .

[40]  W. Tseng,et al.  Re‐examination of Pressure and Speed Dependences of Removal Rate during Chemical‐Mechanical Polishing Processes , 1997 .

[41]  R. Komanduri,et al.  On the Chemo-Mechanical Polishing (CMP) of Si3N4 Bearing Balls With Water Based CeO2 Slurry , 1998 .

[42]  C. Lenardi,et al.  Simulation of Berkovich nanoindentation experiments on thin films using finite element method , 1998 .

[43]  Srinivasan Chandrasekar,et al.  Polishing and Lapping Temperatures , 1997 .

[44]  Effect of Stress on Water Diffusion in Silica Glass , 1984 .

[45]  J. Ager,et al.  Finite-element modeling of nanoindentation for evaluating mechanical properties of MEMS materials , 1998 .

[46]  Bau-Tong Dai,et al.  Modeling of the Wear Mechanism during Chemical‐Mechanical Polishing , 1996 .