Improved accuracy in the determination of flexural rigidity of textile fabrics by the Peirce cantilever test (ASTM D1388)

Within the field of composite manufacturing simulations, it is well known that the bending behavior of fabrics and prepregs has a significant influence on the drapeability and final geometry of a composite part. Due to sliding between reinforcements within a fabric, the bending properties cannot be determined from in-plane properties and a separate test is required. The Peirce cantilever test represents a popular way of determining the flexural rigidity for these materials, and is the preferred method in the ASTM D1388 standard. This work illustrates the severe inaccuracies (up to 72% error) in the current ASTM D1388 standard as well as the original formulation by Peirce, caused by ignoring higher-order effects. A modified approach accounting for higher-order effects and yielding significantly improved accuracy is presented. The method is validated using finite element simulations and experimental testing. Since no independent tests other than the ASTM D1388 standard are available to determine the bending stiffness of fabric materials, experimental validation is performed on an isotropic, homogeneous Upilex-50S foil for which the flexural rigidity and tensile stiffness are related. The flexural rigidity and elastic modulus are determined through both the cantilever test (ASTM D1388) and tensile testing. The results show that the proposed method measures an elastic modulus close to that determined through tensile testing (within 1%), while both the Peirce formulation (+18%) and ASTM standard (+72%) over-estimate the elastic modulus. The proposed methodology allows for a more accurate determination of flexural rigidity, and enables the more accurate simulation of composite forming processes.

[1]  F. T. P. B.Sc..  26—THE “HANDLE” OF CLOTH AS A MEASURABLE QUANTITY , 1930 .

[2]  T. Kang,et al.  Drape Simulation of Woven Fabric by Using the Finite-element Method , 1995 .

[3]  Philippe Boisse,et al.  A Meso–Macro Three Node Finite Element for Draping of Textile Composite Preforms , 2007 .

[4]  Otto Bergsma,et al.  Three Dimensional Simulation of Fabric Draping , 1995 .

[5]  Andrew C. Long,et al.  Finite element forming simulation for non-crimp fabrics using a non-orthogonal constitutive equation , 2005 .

[6]  Muthu Govindaraj,et al.  A Physically Based Model of Fabric Drape Using Flexible Shell Theory , 1995 .

[7]  Constantina Lekakou,et al.  Solid-mechanics finite element simulations of the draping of fabrics: a sensitivity analysis , 2000 .

[8]  T. G. Rogers,et al.  Forming kinematics of continuous fibre reinforced laminates , 1991 .

[9]  Numerical Tools for Composite Woven Fabric Preforming , 2013 .

[10]  W. Morton,et al.  XXXII. On the large bending of thin flexible strips and the measurement of their elasticity , 1927 .

[11]  A. Hammami,et al.  Prediction of fibre orientation and net shape definition of complex composite parts , 1996 .

[12]  J. Sherwood,et al.  Simulation of the thermostamping of woven composites: mesoscopic modelling using explicit fea codes , 2009 .

[13]  P. Boisse,et al.  3 – Finite element analysis of composite forming , 2007 .

[14]  Philippe Boisse,et al.  A semi‐discrete shell finite element for textile composite reinforcement forming simulation , 2009 .

[15]  Pierre Badel,et al.  Rate constitutive equations for computational analyses of textile composite reinforcement mechanical behaviour during forming , 2009 .

[16]  Ignace Verpoest,et al.  Experimental validation of forming simulations of fabric reinforced polymers using an unsymmetrical mould configuration , 2009 .

[17]  M. Clifford,et al.  1 – Composite forming mechanisms and materials characterisation , 2007 .

[18]  H. M. Taylor,et al.  39—The Fitting of Woven Cloth to Surfaces , 1956 .

[19]  H. Borouchaki,et al.  Present State of the Art of Composite Fabric Forming: Geometrical and Mechanical Approaches , 2009, Materials.

[20]  Modelling of composite sheet forming: a review , 2002 .

[21]  Piotr Szablewski,et al.  Numerical Analysis of Peirce's Cantilever Test for the Bending Rigidity of Textiles , 2003 .