Numerical simulation of plasticity-induced fatigue crack closure with emphasis on the crack growth scheme: 2D and 3D analyses

In this paper a numerical simulation of plasticity-induced fatigue crack closure is performed using the finite element method. Emphasis is placed on the crack growth scheme usually adopted for modelling fatigue crack growth in crack closure problems. The number of load cycles between node releases usually reported in the literature has been, in general, one or two. The present work shows that increasing the number of load cycles between node releases has a strong effect on the opening stresses, particularly, under plane strain conditions and 3D fatigue cracks, in contrast plane stress shows little variation with increasing number of load cycles. This investigation also suggests that ratchetting may take place close to the crack tip in both plane strain and 3D crack problems. The problem of discontinuous crack closure under plane strain conditions, often reported in the literature, is also addressed.

[1]  A. F. Grandt,et al.  Three-dimensional crack closure behavior , 1990 .

[2]  J. Zapatero,et al.  Influence of minimum element size to determine crack closure stress by the finite element method , 2005 .

[3]  A. Kapoor.  A re-evaluation of the life to rupture of ductile metals by cyclic plastic strain , 1994 .

[4]  Ji-Ho Song,et al.  Finite‐element analysis of fatigue crack closure under plane strain conditions: stabilization behaviour and mesh size effect , 2005 .

[5]  Kiran Solanki,et al.  A new methodology for computing crack opening values from finite element analyses , 2004 .

[6]  R. C. McClung,et al.  On the finite element analysis of fatigue crack closure—2. Numerical results , 1989 .

[7]  Fernand Ellyin,et al.  A study of fatigue crack closure by elastic-plastic finite element analysis for constant-amplitude loading , 1996 .

[8]  J. Benthem.  State of stress at the vertex of a quarter-infinite crack in a half-space , 1977 .

[9]  S. R. Daniewicz,et al.  Simulation of plasticity-induced fatigue crack closure in part-through cracked geometries using finite element analysis , 2002 .

[10]  Robert McClung,et al.  On the finite element analysis of fatigue crack closure—1. Basic modeling issues , 1989 .

[11]  David Nowell,et al.  On the accurate assessment of crack opening and closing stresses in plasticity-induced fatigue crack closure problems , 2007 .

[12]  Liguo Zhao,et al.  The evolution of the stress–strain fields near a fatigue crack tip and plasticity‐induced crack closure revisited , 2004 .

[13]  L. P. Borrego,et al.  A numerical study of fatigue crack closure induced by plasticity , 2008 .

[14]  Fei Ding,et al.  A reexamination of plasticity-induced crack closure in fatigue crack propagation , 2005 .

[15]  Wei Sun,et al.  Residual stress fields during fatigue crack growth , 1992 .

[16]  M. N. James,et al.  A study of fatigue crack closure in polycarbonate CT specimens , 2000 .

[17]  D. S. Dugdale.  Yielding of steel sheets containing slits , 1960 .

[18]  Kiran Solanki,et al.  Finite element modeling of plasticity-induced crack closure with emphasis on geometry and mesh refinement effects , 2003 .

[19]  J. Schijve,et al.  CRACK OPENING STRESS MEASUREMENTS OF SURFACE CRACKS IN 7075‐T6 ALUMINIUM ALLOY PLATE SPECIMEN THROUGH ELECTRON FRACTOGRAPHY , 1992 .

[20]  D. A. Hills,et al.  A comparison of two and three-dimensional analyses of fatigue crack closure , 2007 .

[21]  J. Newman.  A crack-closure model for predicting fatigue crack growth under aircraft spectrum loading , 1981 .

[22]  Robert H. Dodds,et al.  A numerical investigation of 3-D small-scale yielding fatigue crack growth , 2003 .

[23]  E. Wolf.  Fatigue crack closure under cyclic tension , 1970 .

[24]  J. Newman,et al.  Fatigue-life prediction methodology using small-crack theory , 1999 .

[25]  Wei Sun,et al.  Modeling of plane strain fatigue crack closure , 1991 .

[26]  Robert H. Dodds,et al.  Three-dimensional effects on fatigue crack closure in the small-scale yielding regime – a finite element study , 2003 .

[27]  A. F. Blom,et al.  Fatigue crack growth and closure behaviour of semicircular and semi-elliptical surface flaws , 1993 .

[28]  K. Kolk,et al.  Numerical and experimental investigations of the influence of corner singularities on 3D fatigue crack propagation , 2005 .

[29]  C. Hou.  Three-dimensional finite element analysis of fatigue crack closure behavior in surface flaws , 2004 .

[30]  Norman A. Fleck,et al.  Finite element analysis of plasticity-induced crack closure under plane strain conditions , 1986 .

[31]  B. H. Thacker,et al.  Finite element visualization of fatigue crack closure in plane stress and plane strain , 1991, International Journal of Fracture.

[32]  S. R. Daniewicz,et al.  Determination of the opening load for a growing fatigue crack: evaluation of experimental data reduction techniques and analytical models , 2002 .

[33]  Fernand Ellyin,et al.  A numerical investigation on the effect of an overload on fatigue crack opening and closure behaviour , 1999 .

[34]  Pommier,et al.  Bauschinger effect of alloys and plasticity-induced crack closure: a finite element analysis , 2000 .

[35]  Jesús Toribio,et al.  Large crack tip deformations and plastic crack advance during fatigue , 2007 .

[36]  P. Bowen,et al.  On the finite element simulation of three-dimensional semi-circular fatigue crack growth and closure , 1998 .

[37]  Sylvie Pommier,et al.  Plane strain crack closure and cyclic hardening , 2002 .

[38]  James C. Newman,et al.  Closure of plane‐strain cracks under large‐scale yielding conditions , 2002 .