Development of Citrate‐Based Dual‐Imaging Enabled Biodegradable Electroactive Polymers

Increasing occurrences of degenerative diseases, defective tissues and severe cancers heighten the importance of advanced biomedical treatments, which in turn enhance the need for improved biomaterials with versatile theranostic functionalities yet using minimal design complexity. Leveraging the advantages of citrate chemistry, we developed a multifunctional citrate-based biomaterial platform with both imaging and therapeutic capabilities utilizing a facile and efficient one-pot synthesis. The resulting aniline tetramer doped biodegradable photoluminescent polymers (BPLPATs) not only possess programmable degradation profiles (<1 to >6 months) and mechanical strengths (~20 MPa to > 400 MPa), but also present a combination of intrinsic fluorescence, photoacoustic (PA) and electrical conductivity properties. BPLPAT nanoparticles are able to label cells for fluorescence imaging and perform deep tissue detection with PA imaging. Coupled with significant photothermal performance, BPLPAT nanoparticles demonstrate great potential for thermal treatment and in vivo real-time detection of cancers. Our results on BPLPAT scaffolds demonstrate three-dimensional (3D) high-spatial-resolution deep tissue PA imaging (23 mm), as well as promote growth and differentiation of PC-12 nerve cells. We envision that the biodegradable dual-imaging-enabled electroactive citrate-based biomaterial platform will expand the currently available theranostic material systems and open new avenues for diversified biomedical and biological applications via the demonstrated multi-functionality.

[1]  Jian Yang,et al.  Neuropeptide Y Y1 receptor-mediated biodegradable photoluminescent nanobubbles as ultrasound contrast agents for targeted breast cancer imaging. , 2017, Biomaterials.

[2]  Christine E. Schmidt,et al.  Conducting polymers in biomedical engineering , 2007 .

[3]  Gang Liu,et al.  PEGylated WS2 Nanosheets as a Multifunctional Theranostic Agent for in vivo Dual‐Modal CT/Photoacoustic Imaging Guided Photothermal Therapy , 2014, Advanced materials.

[4]  K. Neoh,et al.  Stability studies of polyaniline , 1990 .

[5]  P. Ma,et al.  Electroactive biodegradable polyurethane significantly enhanced Schwann cells myelin gene expression and neurotrophin secretion for peripheral nerve tissue engineering. , 2016, Biomaterials.

[6]  Shay Artzi,et al.  In vivo and in vitro tracking of erosion in biodegradable materials using non-invasive fluorescence imaging , 2011, Nature materials.

[7]  Kai Li,et al.  Polymer-encapsulated organic nanoparticles for fluorescence and photoacoustic imaging. , 2014, Chemical Society reviews.

[8]  Mohammad Reza Abidian,et al.  High Performance Conducting Polymer Nanofiber Biosensors for Detection of Biomolecules , 2014, Advanced materials.

[9]  Zhiwen Liu,et al.  A smartphone-based chloridometer for point-of-care diagnostics of cystic fibrosis. , 2017, Biosensors & bioelectronics.

[10]  K. Nguyen,et al.  Development of Intrinsically Photoluminescent and Photostable Polylactones , 2014, Advanced materials.

[11]  Jian Yang,et al.  Synthesis and characterization of anti-bacterial and anti-fungal citrate-based mussel-inspired bioadhesives. , 2016, Biomaterials.

[12]  Sandra J Shefelbine,et al.  Bone mechanical properties and changes with osteoporosis. , 2016, Injury.

[13]  Robert Langer,et al.  A Perspective on the Clinical Translation of Scaffolds for Tissue Engineering , 2014, Annals of Biomedical Engineering.

[14]  R. T. Tran,et al.  Development of Injectable Citrate-Based Bioadhesive Bone Implants. , 2015, Journal of materials chemistry. B.

[15]  N A Peppas,et al.  New challenges in biomaterials. , 1994, Science.

[16]  Wei Chen,et al.  Development of aliphatic biodegradable photoluminescent polymers , 2009, Proceedings of the National Academy of Sciences.

[17]  Jin Ho Chang,et al.  Amplified photoacoustic performance and enhanced photothermal stability of reduced graphene oxide coated gold nanorods for sensitive photoacoustic imaging. , 2015, ACS nano.

[18]  R. Weissleder A clearer vision for in vivo imaging , 2001, Nature Biotechnology.

[19]  Jesse V. Jokerst,et al.  Semiconducting Polymer Nanoparticles as Photoacoustic Molecular Imaging Probes in Living Mice , 2014, Nature nanotechnology.

[20]  A. Albertsson,et al.  Biodegradable and electrically conducting polymers for biomedical applications , 2013 .

[21]  Zhanna A. Boeva,et al.  Polyaniline: Synthesis, properties, and application , 2014, Polymer Science Series C.

[22]  Adv , 2019, International Journal of Pediatrics and Adolescent Medicine.

[23]  R. Tsien,et al.  Activatable cell penetrating peptides linked to nanoparticles as dual probes for in vivo fluorescence and MR imaging of proteases , 2010, Proceedings of the National Academy of Sciences.

[24]  Zhiwen Liu,et al.  Citrate-based fluorescent materials for low-cost chloride sensing in the diagnosis of cystic fibrosis† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c6sc02962k Click here for additional data file. , 2016, Chemical science.

[25]  S. Gambhir,et al.  Quantum Dots for Live Cells, in Vivo Imaging, and Diagnostics , 2005, Science.

[26]  Jian Yang,et al.  Fluorescence imaging enabled poly(lactide-co-glycolide). , 2016, Acta biomaterialia.

[27]  Jamila Hedhli,et al.  A bioreducible N-oxide-based probe for photoacoustic imaging of hypoxia , 2017, Nature Communications.

[28]  Jimin P. Kim,et al.  Click chemistry improved wet adhesion strength of mussel-inspired citrate-based antimicrobial bioadhesives. , 2017, Biomaterials.

[29]  Jian Yang,et al.  Engineering biodegradable polyester elastomers with antioxidant properties to attenuate oxidative stress in tissues. , 2014, Biomaterials.

[30]  C. James,et al.  Dual bioluminescence and near-infrared fluorescence monitoring to evaluate spherical nucleic acid nanoconjugate activity in vivo , 2017, Proceedings of the National Academy of Sciences.

[31]  Xiaolong Liang,et al.  PEGylated Polypyrrole Nanoparticles Conjugating Gadolinium Chelates for Dual‐Modal MRI/Photoacoustic Imaging Guided Photothermal Therapy of Cancer , 2015 .

[32]  R. T. Tran,et al.  In Situ Re-endothelialization via Multifunctional Nanoscaffolds , 2014, ACS nano.

[33]  R. Langer,et al.  Designing materials for biology and medicine , 2004, Nature.

[34]  Sophia Mã ¶ ller,et al.  Biomechanics — Mechanical properties of living tissue , 1982 .

[35]  Sanjay Garg,et al.  Conducting polymers with defined micro- or nanostructures for drug delivery. , 2016, Biomaterials.

[36]  Robert Langer,et al.  Supramolecular biomaterials. , 2016, Nature materials.

[37]  Chad Johnson,et al.  The effect of scaffold degradation rate on three-dimensional cell growth and angiogenesis. , 2004, Biomaterials.

[38]  Nikhil Mehta,et al.  Flexible biodegradable citrate-based polymeric step-index optical fiber. , 2017, Biomaterials.

[39]  Jian Yang,et al.  In vitro cytocompatibility evaluation of poly(octamethylene citrate) monomers toward their use in orthopedic regenerative engineering , 2018, Bioactive materials.

[40]  David J. Mooney,et al.  Inspiration and application in the evolution of biomaterials , 2009, Nature.

[41]  Y. E. Chen,et al.  Ductile electroactive biodegradable hyperbranched polylactide copolymers enhancing myoblast differentiation. , 2015, Biomaterials.

[42]  R. T. Tran,et al.  Citrate-Based Biomaterials and Their Applications in Regenerative Engineering. , 2015, Annual review of materials research.

[43]  Leming Sun,et al.  Bioinspired fluorescent dipeptide nanoparticles for targeted cancer cell imaging and real-time monitoring of drug release. , 2016, Nature nanotechnology.

[44]  A. Boccaccini,et al.  Tissue engineering of electrically responsive tissues using polyaniline based polymers: a review. , 2014, Biomaterials.

[45]  R. T. Tran,et al.  Fluorescence imaging enabled urethane-doped citrate-based biodegradable elastomers. , 2013, Biomaterials.

[46]  J. Lemaître,et al.  Handbook of materials behavior models , 2001 .

[47]  R. T. Tran,et al.  Click Chemistry Plays a Dual Role in Biodegradable Polymer Design , 2014, Advanced materials.