Uplink Multiuser MIMO Transceiver Design with Transmitting Beamforming under Power Constraints

We consider the transceiver design for uplink multiuser multi-input multi-output (MIMO) communications, where multiple transmitters adopt beamforming to simultaneously access the linear spatial equalizer at the receivers. In this paper, we investigated the crucial, yet not well discussed issue to jointly design beamforming weights for all transmitters, subject to total transmission power constraints, under the assumption that all users' channel state information (CSI) is available at each of the users. We proposed a class of orthogonal joint beamforming design schemes with matched filter receiver, and an eigen-beamforming (Eig-BF) scheme with ordered successive interference cancellation minimum mean square error receiver (OSIC-MMSE). By comparing these schemes with the optimal joint transceiver design with optimality in terms of overall mean square error (MSE), we show that Eig-BF OSIC-MMSE scheme achieves near-optimum performance at much lower complexity and with much simpler transmitter design, since it only requires each transmitter to know its own CSI and thus can be implemented in a decentralized way. This indicates that marginal performance improvement can be benefited from making all transmitters share their CSI. The orthogonal beamforming schemes, on the other hand, accomplish the simplest receiver structure at the cost of more complicated cooperative transmitters

[1]  Aylin Yener,et al.  Transceiver optimization for multiuser MIMO systems , 2004, IEEE Transactions on Signal Processing.

[2]  Martin Haardt,et al.  An introduction to the multi-user MIMO downlink , 2004, IEEE Communications Magazine.

[3]  Wei Yu,et al.  The optimality of beamforming in uplink multiuser wireless systems , 2004, IEEE Transactions on Wireless Communications.

[4]  Sang Wu Kim,et al.  Log-likelihood ratio based detection ordering for the V-BLAST , 2003, GLOBECOM '03. IEEE Global Telecommunications Conference (IEEE Cat. No.03CH37489).

[5]  Reinaldo A. Valenzuela,et al.  V-BLAST: an architecture for realizing very high data rates over the rich-scattering wireless channel , 1998, 1998 URSI International Symposium on Signals, Systems, and Electronics. Conference Proceedings (Cat. No.98EX167).

[6]  Ke Liu,et al.  An iterative extension of BLAST decoding algorithm for layered space-time signals , 2005, IEEE Transactions on Communications.

[7]  Shidong Zhou,et al.  Log-likelihood detection ordering for MMSE-SIC in V-BLAST systems , 2005, VTC-2005-Fall. 2005 IEEE 62nd Vehicular Technology Conference, 2005..

[8]  Anass Benjebbour,et al.  Comparison of ordered successive receivers for space-time transmission , 2001, IEEE 54th Vehicular Technology Conference. VTC Fall 2001. Proceedings (Cat. No.01CH37211).

[9]  Yongle Wu,et al.  Linear transmitter precoding design for downlink of multiuser MIMO systems , 2005 .

[10]  Ami Wiesel,et al.  Linear precoding via conic optimization for fixed MIMO receivers , 2006, IEEE Transactions on Signal Processing.

[11]  Holger Boche,et al.  Solution of the multiuser downlink beamforming problem with individual SINR constraints , 2004, IEEE Transactions on Vehicular Technology.