Hot isostatic pressing of laser powder bed fusion AlSi10Mg: parameter identification and mechanical properties
暂无分享,去创建一个
G. Pyka | B. Bacroix | A. Simar | Lv Zhao | D. Tingaud | L. Ryelandt | C. van der Rest | Juan Guillermo Santos Macías
[1] C. Elangeswaran,et al. Fatigue crack nucleation and growth in laser powder bed fusion AlSi10Mg under as built and post-treated conditions , 2021, Materials & Design.
[2] Hong Wu,et al. Selective laser melted AlSi10Mg alloy under melting mode transition: Microstructure evolution, nanomechanical behaviors and tensile properties , 2021 .
[3] Moataz M. Attallah,et al. Evolution of internal pores within AlSi10Mg manufactured by laser powder bed fusion under tension: As-built and heat treated conditions , 2021 .
[4] A. Fortini,et al. Effect of different heat-treatment routes on the impact properties of an additively manufactured AlSi10Mg alloy , 2020 .
[5] E. Maire,et al. Influence on microstructure, strength and ductility of build platform temperature during laser powder bed fusion of AlSi10Mg , 2020 .
[6] S. Leuders,et al. Fatigue strength estimation methodology of additively manufactured metallic bulk material , 2020 .
[7] M. Gelfi,et al. Effect of a New High-Pressure Heat Treatment on Additively Manufactured AlSi10Mg Alloy , 2020, Metallurgical and Materials Transactions A.
[8] E. Koç,et al. Effect of HIP process and subsequent heat treatment on microstructure and mechanical properties of direct metal laser sintered AlSi10Mg alloy , 2020 .
[9] Moataz M. Attallah,et al. Classifying shape of internal pores within AlSi10Mg alloy manufactured by laser powder bed fusion using 3D X-ray micro computed tomography: Influence of processing parameters and heat treatment , 2020, Materials Characterization.
[10] T. Nakamoto,et al. Effects of hot isostatic pressing and internal porosity on the performance of selective laser melted AlSi10Mg alloys , 2020 .
[11] G. Proust,et al. Factors that affect the properties of additively-manufactured AlSi10Mg: Porosity versus microstructure , 2019, Additive Manufacturing.
[12] H. Idrissi,et al. Damage mechanisms in selective laser melted AlSi10Mg under as built and different post-treatment conditions , 2019, Materials Science and Engineering: A.
[13] C. Elangeswaran,et al. Ductilisation and fatigue life enhancement of selective laser melted AlSi10Mg by friction stir processing , 2019, Scripta Materialia.
[14] W. Schneller,et al. Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg , 2019, Journal of Manufacturing and Materials Processing.
[15] Moataz M. Attallah,et al. Linking microstructure and processing defects to mechanical properties of selectively laser melted AlSi10Mg alloy , 2018, Theoretical and Applied Fracture Mechanics.
[16] N. Uzan,et al. High-temperature mechanical properties of AlSi10Mg specimens fabricated by additive manufacturing using selective laser melting technologies (AM-SLM) , 2018, Additive Manufacturing.
[17] B. McWilliams,et al. Microstructure, precipitates and hardness of selectively laser melted AlSi10Mg alloy before and after heat treatment , 2018, Materials Characterization.
[18] E. Charkaluk,et al. Comparative study of fatigue properties of Ti-6Al-4V specimens built by electron beam melting (EBM) and selective laser melting (SLM) , 2018, Materials Characterization.
[19] C. Arvieu,et al. Main defects observed in aluminum alloy parts produced by SLM: From causes to consequences , 2018, Additive Manufacturing.
[20] L. Deibler,et al. Effect of Hot Isostatic Pressing and Powder Feedstock on Porosity, Microstructure, and Mechanical Properties of Selective Laser Melted AlSi10Mg , 2018, Metallography, Microstructure, and Analysis.
[21] R. Shneck,et al. Heat treatment effect on the mechanical properties and fracture mechanism in AlSi10Mg fabricated by additive manufacturing selective laser melting process , 2018, Materials Science and Engineering: A.
[22] Michael Gschweitl,et al. Qualification of AM parts: Extreme value statistics applied to tomographic measurements , 2017 .
[23] N. Uzan,et al. Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM) , 2017 .
[24] R. M. Ward,et al. Selective laser melting of AlSi10Mg: Influence of post-processing on the microstructural and tensile properties development , 2016 .
[25] David W. Rosen,et al. Design for Additive Manufacturing , 2015, Additive Manufacturing Technologies.
[26] Helen V. Atkinson,et al. Fundamental aspects of hot isostatic pressing: An overview , 2000 .
[27] A. Brandão,et al. HCF resistance of AlSi10Mg produced by SLM in relation to the presence of defects , 2017 .
[28] A. Stern,et al. POST-PROCESSING OF AM-SLM AlSi10Mg SPECIMENS: MECHANICAL PROPERTIES AND FRACTURE BEHAVIOUR , 2016 .
[29] 村上 敬宜. Metal fatigue : effects of small defects and nonmetallic inclusions , 2002 .