论文信息 - Development of diagnosis index for tick/click and tone noise of blower motor using vibration signals

Development of diagnosis index for tick/click and tone noise of blower motor using vibration signals

Various studies have been conducted for the diagnosis of noise condition of complex rotary machines. In this study, diagnosis index using vibration signal is developed for the efficient and objective assessment of noise condition of a blower motor. The noise most commonly caused by the abnormal blower motor are Tick/Click noise and Tone noise. According to cause and noise characteristics, time-frequency analysis is used to diagnose Tick/Click noise, and smoothing in frequency domain is used to diagnose tone noise condition. The noise condition of the blower motors were diagnosed using the developed index and these results are compared with the diagnostic results by the experts. As a result, the agreement rate was about 95 %.

Cheolung Cheong | Songjune Lee | In-Hyuk Lee

[1] Wensheng Su,et al. Rolling element bearing faults diagnosis based on optimal Morlet wavelet filter and autocorrelation enhancement , 2010 .

[2] W. Staszewski. IDENTIFICATION OF DAMPING IN MDOF SYSTEMS USING TIME-SCALE DECOMPOSITION , 1997 .

[3] Ioannis Antoniadis,et al. Demodulation of Vibration Signals Generated by Defects in Rolling Element Bearings Using Complex Shifted Morlet Wavelets , 2002 .

[4] Naim Baydar,et al. A comparative study of acoustic and vibration signals in detection of gear failures using Wigner-Ville distribution. , 2001 .

[5] Jie Liu,et al. Wavelet spectrum analysis for bearing fault diagnostics , 2007 .

[6] D. Osypiw,et al. On-Line Vibration Analysis with Fast Continuous Wavelet Algorithm for Condition Monitoring of Bearing , 2003 .