Degrees of Freedom in the Design of PM Synchronous Machines

This contribution discusses the design of permanent magnet (PM) machines in the context of very demanding applications such as electrical vehicles traction. The goal is to inventory the additional degrees of freedom which could be advantageously used in the optimal design of PM electrical machines. Indeed, identifying these additional degrees of freedom will help positively responding to highly constrained design problems.

[1]  Y. Amara,et al.  Mechanical Construction and Bearing Function Integration in Tubular Linear Flux Switching Machines , 2021, 2021 13th International Symposium on Linear Drives for Industry Applications (LDIA).

[2]  A. El-Refaie,et al.  Additively Manufactured Hollow Conductors Integrated With Heat Pipes: Design Tradeoffs and Hardware Demonstration , 2021, IEEE Transactions on Industry Applications.

[3]  Sami Hlioui,et al.  Pre-optimization of hybridization ratio in hybrid excitation synchronous machines using electrical circuits modelling , 2021, Math. Comput. Simul..

[4]  Z. Zhu,et al.  Novel Magnetic-field-shifting Techniques in Asymmetric Rotor Pole Interior PM Machines with Enhanced Torque Density , 2021 .

[5]  M. Girtan,et al.  The Critical Raw Materials Issue between Scarcity, Supply Risk, and Unique Properties , 2021, Materials.

[6]  David Gerada,et al.  4-MW Class High-Power-Density Generator for Future Hybrid-Electric Aircraft , 2021, IEEE Transactions on Transportation Electrification.

[7]  Mümtaz Mutluer.  Analysis and Design Optimization of Tubular Linear Voice Coil Motor for High Thrust Force and Low Copper Loss , 2021, IEEE Canadian Journal of Electrical and Computer Engineering.

[8]  B. Dagusé,et al.  Design of Shaped-Profile Electrical Machine Windings for Multi-Material Additive Manufacture , 2020, 2020 International Conference on Electrical Machines (ICEM).

[9]  Yvonnick Le Menach,et al.  Optimization of Low-Power Line-Start PM Motor Using Gray Wolf Metaheuristic Algorithm , 2020, Energies.

[10]  Fan Wu,et al.  Toward Additively Manufactured Electrical Machines: Opportunities and Challenges , 2020, IEEE Transactions on Industry Applications.

[11]  Zhiqiang Zeng,et al.  A Novel Hybrid-Excitation Switched-Flux Linear Machine With Partitioned-Excitations , 2019, IEEE Transactions on Magnetics.

[12]  Marian P. Kazmierkowski,et al.  Reluctance Electric Machines: Design and Control [Book News] , 2019, IEEE Industrial Electronics Magazine.

[13]  Hossam Al Ghossini,et al.  A New Concept for Deeper Integration of Converters and Drives in Electrical Machines: Simulation and Experimental Investigations , 2019, Open Physics.

[14]  Maria Evelina Mognaschi,et al.  Many-objective shape optimisation of IPM motors for electric vehicle traction , 2019, International Journal of Applied Electromagnetics and Mechanics.

[15]  Ping Zheng,et al.  Characteristic Analysis and Functional Validation of a Brushless Flux-Modulated Double-Rotor Machine for HEVs , 2019, IEEE Transactions on Industrial Electronics.

[16]  Mehmet Akar,et al.  Design of A Novel Line Start Synchronous Motor Rotor , 2018 .

[17]  Thomas M. Jahns,et al.  Guest Editorial Emerging Electric Machines and Drives for Smart Energy Conversion , 2018 .

[18]  Qinfen Lu,et al.  Investigation of Novel Partitioned-Primary Hybrid-Excited Flux-Switching Linear Machines , 2018, IEEE Transactions on Industrial Electronics.

[19]  Chih-Hsien Lin,et al.  Design and Optimization of a Novel V-Type Consequent-Pole Interior Permanent Magnet Synchronous Motor for Applying to Refrigerant Compressor , 2018, 2018 21st International Conference on Electrical Machines and Systems (ICEMS).

[20]  Yubo Yang,et al.  Comparative Parameters Investigation of Composite Solid Rotor Applied to Line-Start Permanent-Magnet Synchronous Motors , 2018, IEEE Transactions on Magnetics.

[21]  Rong-Jie Wang,et al.  Multiobjective Design of a Line-Start PM Motor Using the Taguchi Method , 2018, IEEE Transactions on Industry Applications.

[22]  Lieven Vandevelde,et al.  Classification Method to Define Synchronization Capability Limits of Line-Start Permanent-Magnet Motor Using Mesh-Based Magnetic Equivalent Circuit Computation Results , 2018 .

[23]  Hui Yang,et al.  Recent advances in variable flux memory machines for traction applications: A review , 2018 .

[24]  Sami Hlioui,et al.  Design Optimization of a Hybrid-Excited Flux-Switching Machine for Aircraft-Safe DC Power Generation Using a Diode Bridge Rectifier , 2017, IEEE Transactions on Industrial Electronics.

[25]  Hui Yang,et al.  Novel reluctance axis shifted machines with hybrid rotors , 2017, 2017 IEEE Energy Conversion Congress and Exposition (ECCE).

[26]  A. Tenconi,et al.  Magnetic Materials Used in Electrical Machines: A Comparison and Selection Guide for Early Machine Design , 2017, IEEE Industry Applications Magazine.

[27]  Q. Maurus,et al.  Increasing the force per unit volume of tubular drives by raising the integration degree , 2017, 2017 11th International Symposium on Linear Drives for Industry Applications (LDIA).

[28]  Nicola Bianchi,et al.  Line-Start PM-Assisted Synchronous Motor Design, Optimization, and Tests , 2017, IEEE Transactions on Industrial Electronics.

[29]  Nuwantha Fernando,et al.  Magnetic materials for electrical machine design and future research directions: A review , 2017, 2017 IEEE International Electric Machines and Drives Conference (IEMDC).

[30]  Nobuyuki Kurita,et al.  Proposal of a Radial- and Axial-Flux Permanent-Magnet Synchronous Generator , 2016, IEEE Transactions on Magnetics.

[31]  Bulent Sarlioglu,et al.  Driving Toward Accessibility: A Review of Technological Improvements for Electric Machines, Power Electronics, and Batteries for Electric and Hybrid Vehicles , 2017, IEEE Industry Applications Magazine.

[32]  Jennifer Werfel,et al.  Linear Electric Actuators And Generators , 2016 .

[33]  Ronghai Qu,et al.  Topologies and analysis of flux-modulation machines , 2015, 2015 IEEE Energy Conversion Congress and Exposition (ECCE).

[34]  Thomas A. Lipo,et al.  Performance Improvement of Ferrite-Assisted Synchronous Reluctance Machines Using Asymmetrical Rotor Configurations , 2015, IEEE Transactions on Magnetics.

[35]  Ayman M. El-Refaie.  Integrated electrical machines and drives: An overview , 2015, 2015 IEEE International Electric Machines & Drives Conference (IEMDC).

[36]  Hyun-Kyo Jung,et al.  Novel Hybrid Radial and Axial Flux Permanent-Magnet Machine Using Integrated Windings for High-Power Density , 2015, IEEE Transactions on Magnetics.

[37]  Thomas A. Lipo,et al.  Optimal Design of a Novel Asymmetrical Rotor Structure to Obtain Torque and Efficiency Improvement in Surface Inset PM Motors , 2015, IEEE Transactions on Magnetics.

[38]  Gianmario Pellegrino,et al.  Optimal number of rotor parameters for the automatic design of Synchronous Reluctance machines , 2014, 2014 International Conference on Electrical Machines (ICEM).

[39]  Cheng Zhu,et al.  Design of a novel axial-radial flux permanent magnet motor , 2014, 2014 17th International Conference on Electrical Machines and Systems (ICEMS).

[40]  Andrea Cavagnino,et al.  New Trends in Electrical Machines Technology—Part II , 2014, IEEE Transactions on Industrial Electronics.

[41]  Thomas A. Lipo,et al.  Operation and design principles of a PM vernier motor , 2013, 2013 IEEE Energy Conversion Congress and Exposition.

[42]  Elena A. Lomonova,et al.  Overload Capability of Linear Flux Switching Permanent Magnet Machines , 2013 .

[43]  D. Matt,et al.  Impact of the assembly constraints on a multi-air gap linear motor , 2012, 2012 XXth International Conference on Electrical Machines.

[44]  M. Kamper,et al.  Design Aspects of a Novel Topology Air-Cored Permanent Magnet Linear Generator for Direct Drive Wave Energy Converters , 2012, IEEE Transactions on Industrial Electronics.

[45]  Yu Wang,et al.  Hybrid Excitation Topologies and Control Strategies of Stator Permanent Magnet Machines for DC Power System , 2012, IEEE Transactions on Industrial Electronics.

[46]  Amit Kumar Jha.  Optimization of Line Start Permanent Magnet Synchronous Motor for Magnet Cost Reduction , 2012 .

[47]  K. Atallah,et al.  Design and Realization of a Linear Magnetic Gear , 2011, IEEE Transactions on Magnetics.

[48]  Sverre Skalleberg Gjerde,et al.  Power conversion system for transformer-less offshore wind turbine , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[49]  R. Nilssen,et al.  State of the art in generator technology for offshore wind energy conversion systems , 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

[50]  Henk Polinder,et al.  Structural mass minimization of large direct-drive wind generators using a buoyant rotor structure , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[51]  Longya Xu,et al.  Optimal Design of Double-Layer Permanent Magnet Dual Mechanical Port Machine for Wind Power Application , 2009, IEEE Transactions on Magnetics.

[52]  Longya Xu.  Dual-mechanical-port electric machines-concept and application of a new electric , 2009, IEEE Industry Applications Magazine.

[53]  Lionel Vido,et al.  Hybrid Excitation Synchronous Machines: Energy-Efficient Solution for Vehicles Propulsion , 2009, IEEE Transactions on Vehicular Technology.

[54]  N. Takorabet,et al.  Design and Analysis of Different Line-Start PM Synchronous Motors for Oil-Pump Applications , 2009, IEEE Transactions on Magnetics.

[55]  D. Howe,et al.  Analysis of a Novel Multi-Tooth Flux-Switching PM Brushless AC Machine for High Torque Direct-Drive Applications , 2008, IEEE Transactions on Magnetics.

[56]  S. Mezani,et al.  A Novel “Pseudo” Direct-Drive Brushless Permanent Magnet Machine , 2008, IEEE Transactions on Magnetics.

[57]  J.A. Ferreira,et al.  A new concept for weight reduction of large direct drive machines , 2008, 2008 18th International Conference on Electrical Machines.

[58]  ダブリュ．デグナー マイケル,et al.  Permanent magnet rotating electrical machine , 2008 .

[59]  Markus Mueller,et al.  Structural mass in direct-drive permanent magnet electrical generators , 2008 .

[60]  H. Shokrollahi,et al.  Soft magnetic composite materials (SMCs) , 2007 .

[61]  D. Richard,et al.  Valeo StARS Technology: A Competitive Solution for Hybridization , 2007, 2007 Power Conversion Conference - Nagoya.

[62]  Laurent Albert.  Modélisation et optimisation des alternateurs à griffes. Application au domaine automobile , 2004 .

[63]  M.A. Rahman,et al.  High-efficiency line-start interior permanent-magnet synchronous motors , 2003, IEEE Transactions on Industry Applications.

[64]  John M. Miller,et al.  Propulsion Systems for Hybrid Vehicles , 2003 .

[65]  V. Ostovic,et al.  Memory motors-a new class of controllable flux PM machines for a true wide speed operation , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[66]  V. Ostovic,et al.  Pole-changing permanent magnet machines , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[67]  J. Pascual,et al.  Message From the Editors , 1972, Neurologia.

[68]  K. Sitapati,et al.  Performance comparisons of radial and axial field, permanent magnet, brushless machines , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[69]  Andrew M. Knight,et al.  The design of high-efficiency line-start motors , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[70]  Jacek F. Gieras,et al.  Linear Synchronous Motors : Transportation and Automation Systems , 1999 .

[71]  B. Multon,et al.  Structures polyentrefers : solutions pour les entrainements directs ? , 1999 .

[72]  Barrie Mecrow,et al.  Combined radial and axial permanent magnet motors using soft magnetic composites , 1999, IEMDC 1999.

[73]  S. Morimoto,et al.  Basic Study of Flux-weakening for Interior Permanent Magnet Synchronous Motor with Moving Iron Piece , 1998 .

[74]  Oded Maimon,et al.  A Mathematical Theory of Design: Foundations, Algorithms and Applications , 1998 .

[75]  Oded Maimon,et al.  The design process: properties, paradigms, and structure , 1997, IEEE Trans. Syst. Man Cybern. Part A.

[76]  Jacek F. Gieras,et al.  Permanent magnet motor technology : design and applications , 1996 .

[77]  Thomas M. Jahns,et al.  Pulsating torque minimization techniques for permanent magnet AC motor drives-a review , 1996, IEEE Trans. Ind. Electron..

[78]  E. Spooner,et al.  Hybrid excitation of AC and DC machines , 1989 .

[79]  T. Miller.  Synchronization of Line-Start Permanent-Magnet AC Motors , 1984, IEEE Transactions on Power Apparatus and Systems.

[80]  C. Rioux.  Aspects préliminaires de la théorie des machines électriques comportant des matériaux ferro-magnétiques , 1980 .

[81]  C. H. Lee,et al.  Vernier Motor and Its Desin , 1963 .